|
Fluidized-bed Combustion of Dry Stabilized Sewage Sludge in Oxy-fuel Mode
Moško, Jaroslav ; Pohořelý, Michael ; Durda, Tomáš ; Zach, Boleslav ; Šyc, Michal ; Svoboda, Karel
Sewage sludge is an inevitable waste stream from wastewater treatment and its disposal is complicated due to specific characteristics of its composition. Sewage sludge combustion/incineration is the only suitable way for disposal of large volumes of sewage sludge containing POPs and some heavy metals. Sewage sludge combustion reduces the volume of such waste and causes destruction of organic contaminants. Oxy-fuel combustion is a technology for simplifying CO2 sequestration from the flue gas by using nearly pure oxygen instead of air for the combustion. In order to control the combustion temperature, part of the flue gas is recycled to combustion chamber. The paper brings information about investigation of the effects of combustion temperature and concentration of oxygen in inlet combustion media on the emissions of NOx, N2O and SO2 in FB combustion of sewage sludge. The experimental results have shown that an increase in combustion temperature leads to an increase in NOx and to a decrease in N2O emissions in the temperature range 750–930 °C. The lowest SO2 emissions were measured in the temperature interval from 800 to 820 °C in all experiments with different oxygen concentration in inlet gas. It was found that when the oxygen concentration in inlet gas increased, the emissions of SO2 increased while emissions of NOx slightly decreased.
Fulltext: content.csg -  PDF
Plný tet: SKMBT_C22016112214480 - PDF
|
| |
|
The methodology for the selection of appropriate restoration work
Machačko, Luboš ; Gláser, Petr ; Bartoš, L. ; Bayer, K. ; Ďoubal, J. ; Justa, P. ; Vojtěchovský, J. ; Krhánková, K. ; Vácha, Z. ; Wichterlová, Z.
The aim of this methodology is to present a recommended procedure which leads to selection of optimal restoration intervention. Selection of the appropriate procedure and method of restoration and reconstruction is the primary prerequisite for the quality and efficiency of future work.
Fulltext: content.csg - PDF
Plný tet: 0457228_2015_Glaser_Machacko_Metodika_pro_vyber_vhodneho_restauratorskeho_zasahu - PDF
|
|
Marketing plan
Nosálová, Lucie ; Štůsek, Jaromír (advisor) ; Ladislav , Ladislav (referee)
The goal of this thesis is to detect errors in the management of small family business, which basically does not use marketing. Following this finding should be to build an effective marketing plan. The diploma thesis is divided into theoretical part, which forms the basis for the analytical part. In the analytical part is described the company and there are also detect errors in the management that are caused by faulty marketing. To achieve results it is important to use several different types of analysis on which it is necessary to set new marketing goals, strategies, changes and projects. The aim is to provide business information and convince him that use of good marketing communication should lead to improve management efficiency and ultimatem increase profitability of the company, without the need to break away from the corporate goal of maximum efforts to build a pro-customer oriented service.
|
|
International trade in a Kraft paper intended for contact with food
Vodičková, Martina ; Regnerová, Olga (advisor) ; Zdeněk, Zdeněk (referee)
The master´s thesis deals with international trade with packaging paper intended for contact with food.
The theoretical part concentrates on packaging types and functions, the history of the paper industry in the Czech Republic and the world market with packaging paper intended for contact with food. The legislation of each country is very important for this type of business, therefore the legislation in selected countries is briefly described, including internationally regarded certification.
In the practical part the author analyses the sales of the company Mondi Štětí a.s. in the years from 2010 to 2012 and defines countries with the highest purchasing of packaging paper for end-use with food contact.
The third part is devoted to evaluation of the market and the way the company trades on the market. There are contained proposals for optimization leading to the acceleration of trade in this commodity
|
|
Freezing technology of bull sperm in relation to its survivability and fertilization ability
Doležalová, Martina ; Stádník, Luděk (advisor) ; Jiří, Jiří (referee)
The aim of optimalization the insemination doses production is to provide the highest fertilization ability of spermatozoa during the demanding proces of processing fresh semen and its subsequent cryopreservation. Temperature changes causes spermatozoa damage during the cooling and freezing. Spermatozoa is exposed to cold shock and many others limiting factors, which leads to cell death and therefore to decline of fertilization ability of thawed insemination doses. For increasing spermatozoa resistance, exactly the plasma membrane resistance against cold shock was fraction of egg yolk LDL cholesterol (low density lipoprotein) at various concentrations into the comercially produced diluents added. It is believed that LDL acts possitively to plasma membrane and helps to maintain the fertilization ability of spermatozoa after thawing. Following step in the proces of insemination doses production is slow cooling of diluted semen and equilibration, when the straws are store at cooling box for 30 minutes to 240 hours. This period is necessary to penetrate of certain diluent components into the spermatazoa also maintain the balance between their intracellular and extracellular concentration. Also important is subsequent freezing temperature gradient of insemination doses. The most suitable freezing method is based on computer controlled temperature decline in freezing chamber which allows the precise control of ice crystals formation that could tear and kill the cell.
During 2012 to 2016 was repeatedly collected semen from the group of breeding bulls (n = 27, Holstein and Czech Fleckvieh breed) at AI centre. Semen which fulfill the standard entrance conditions in first step was evenly into several parts divided. For dilution the three types of comercially diluents AndroMed, Bioxcell and Triladyl with and without LDL addition were used. Into the diluents AndroMed and Bioxcell the concentration of LDL 4 %, 6 % and 8% into the dilent Triladyl 6 %, 8 % and 10 % was added. Diluted semen was filled into the glass capillares with volume 0,1 ml and temperature +4 °C. Subsequently the sample was placed to cold bath (0°C) for 10 minutes. Then the volume of capillare with physiological solution (37 °C) was mixed and for next 120 minutes was incubate. The effect of cold shock to proportion of live spermatozoa was evaluated by using Eosin and Nigrosine staining technique during heat test of spermatozoa survivability after spermatozoa heating and after 120 minutes of incubation.
The more suitable semen diluents which provide the higher spermatozoa resistance against cold shock were AndroMed and Bioxcell. Together the possitive effect of LDL addition into the diluents to lower decrease of proportion of live spermatozoa during heat test was found (P<0.05). The most suitable LDL concentration which had a favorable influence at spermatozoa resistance against cold shock was 6 % in diluent Bioxcell. Values of the proportion of live sperm were higher at the beginning of the heat test (+1.31% to + 3.2%) and after 120 minute incubation (+5.82% to +8.41%) compared to other diluents with and without addition of LDL.
In the next step the process of equilibration was optimized, is an important part of insemination doses production. The effect of the length of equilibration for subsequent fertilization ability of spermatozoa was evaluated using spermatozoa motility based of CASA and proportion of live spermatozoa after thawing and during heat survival test lasting 120 minutes (37 ° C). Suitable semen was diluted by comercially used diluent AndroMed based on soya lecithin, filled into the straws (0.25 ml), cooled and equilibrated in cooling box for 30, 120 and 240 minutes and freezed in programmable freezing box applying four types of freezing curves differing in temperature rate decline. There was used standard and by producer recommended 3. phase freezing curve, then 2. phase freezing curve, and 3. phase freezing curve with slower as well as rapid decline of temperature rate in freezing chamber, compared with standard freezing curve. The highest spermatozoa motility was found using 240 minutes of equilibration by +2.72% and +4.58% compared to other lengths of equilibration (P <0.05 to 0.01). The highest proportion of live spermatozoa was found using 120 minutes of equilibration (+6.87 % and +8.68 %). The highest average spermatozoa motility during heat test after thawing was achieved by using 2. phase freezing curve (from +2.97% to +10.37%, P <0.05), also in the proportion of live spermatozoa (from + 4.37% to +8.82%, P <0.01). When evaluating interaction between the length of equilibration and freezing curve (standard 3. phase and 2 . phase freezing curve), the highest average spermatozoa motility and proportion of live spermatozoa using 240 minutes of equilibration by both freezing curves was reached, there was no statistically significant differences. As well as, in all evaluated parts of this study the individual differences between ejaculate of bulls and within semen from one bull (P <0.05) as secondary effect were found.
To maintain good fertilization ability of semen during cryopreservation is necessary to increase the spermatozoa resistance against cold shock using addition of correct concentration of LDL into the commercially used diluents AndroMed and Bioxcell. Subsequently the fertilization ability of insemination dose is influenced by cooling, the length of equilibration and freezing. The length of equilibration 120 minutes and more as well as gentle way of freezing according to freezing curve, which ensures a gradual decrease of temperature in freezing chamber provided the higher average spermatozoa motility and proportion of live spermatozoa.
|
|
Influence of meadow management on the migration behavior of selected species of butterflies
Bubová, Terezie ; Langrová, Iva (advisor) ; Farkač, Jan (referee)
Migrations are the key process and one of the basic biological features, which allow survival of endangered species in fragmented landscape. In the last decades, agriculture intensification, industry and urbanization caused that number of natural butterfly habitats has significantly decreased. The localities originally suitable for butterflies are currnetly converted to farmland or building plots. This PhD thesis aimed to find a compromise solution of meadow management, which should allow a commercial use and concurrently do not jeopardize the continued existence of endangered or threatened species. The main idea of this study was in the intentional emigration causing in the middle of flight period, which should lead into resettlement of the population to another (potentially more suitable) locality. Possibility of aimed manipulation with butterfly emigrations would be considered as a major breakthrough in their protection.
The investigated species Phengaris nausithous (Bergsträsser, 1779) and Phengaris teleius (Bergsträsser, 1779) are both considered to be flagship species for protection of European butterflies at open meadows. This study is based on research, which was carried out in 2013-2015 at 17 patch in localities Dolní Labe, Czech Republic. In above mentioned years, one selected meadow was mowed in the middle of flight season and the emigrations were then monitored using mark-release-recapture method. Results of population and migration characteristics were calculated in MARK 8.1 software. Subsequently, the effect of mowing on emigration (comparison of emigrations from the meadow before and after mowing) was evaluated using Statistica 13.
The hypotheses of this study were based on the assumption, that the loss of resources after well-timed mowing should increase the activity of adult butterflies. During the monitoring, number of emigrations was increased only in flight season 2015. Unfortunately, the statistical evaluation did not show significant effect of mowing on migrations. On the other hand, the hypothesis dealing with colonization of nearest meadows was confirmed.
Effect of intentional emigration caused by management interventions was unfortunately not proved. However, we found out, that even though the population at one mowed meadow decreased clearly, the metapopulation size at the locality remained more or less stable.
At investigated (mowed) meadow, there was observed a sharp decline of P. nausithous abundance. On the other hand, P. teleius population was only slightly reduced. It is therefore conceivable, that P. teleius are not as susceptible to innapropriate term of mowing. The results obtained in our research conclusively displayed no possible positive effect of mowing in the middle of flight season and a necessity of suitable management maintenance at localities inhabited by Phengaris butterflies.
|
|
Total contents and speciation of arsenic and selenium in plants growing in soils with different physico-chemical properties
Tremlová, Jana ; Száková, Jiřina (advisor) ; Vymazal, Jan (referee)
This dissertation thesis deals with uptake, accumulation and transformation of arsenic and selenium in plants growing on soils with different chemico-physical soil properties. The contents of arsenic were investigated in 99 wild plant species, coming from 27 different families and 6 different vegetables growing in arsenic contaminated soils. The results suggest that there are species-specific mechanisms which protects certain plants from the excessive uptake of arsenic from the soil. On the other hand, there are plants using a strategy of accumulation, which theoretically may increase the risk of arsenic entry into the food chain, whether through grazing cattle and wildlife or through consumption of vegetables growing on arsenic contaminated soils. The most prevalent arsenic compounds are AsV and AsIII. Other arsenic compounds occure as minor species. An important finding was detection of arsenobetaine in Plantago lanceolata L. and Carex praecox Schreb ..
The contents of selenium were examined in 73 species of wild plants, coming from 29 different families. The results suggest that naturally low levels of selenium in the soil of selected locations along with a low capability of selenium uptake via collected plant species lead to the low content of selenium in plant biomass which may contribute to selenium deficient throughout the food chain. Foliar application of selenate on wild plant communities and on some types of vegetables in our case Brassica oleracea var. italica can have a positive impact on increasing the selenium content in the aboveground biomass of these plants and by extension, increase the selenium content in the human diet. Dominant selenium compounds in the aboveground biomass of the analyzed plants were SeVI and selenomethionine, with variable proportion of other commonly occurring organic selenium compounds, which is mainly affected by plant species.
|
|
Multimedia Data Processing in Heterogeneous Distributed Environment
Kajan, Rudolf ; Ferko,, Andrej (referee) ; Míkovec, Zdeněk (referee) ; Herout, Adam (advisor)
Pervasive computing sa zameriava odstránenie zložitostí pri interakcii s výpočtovou technikou a zvýšenie efektivity pri jej každodennom používaní. Ale i po viac ako 15 rokoch od sformulovania hlavných cieľov Pervasive computingu existujú aspekty interakcie ktoré stále nie sú súčasťou užívateľskej skúsenosti s dnešnou technológiou. Bezproblémová integrácia s prostredím vedúca k technologickej neviditeľnosti, alebo interakcia naprieč rôznymi zariadeniami predstavujú stále veľkú výzvu. Hlavným cieľom tejto práce je prispieť k tomu, aby sa ciele Pervasive computingu priblížili k realizovaniu tým, že predstavíme spôsob intuitívneho zdieľania informácií medzi osobným a verejne umiestneným zariadením. Predstavili sme tri interakčné techniky, ktoré podporujú intuitívnu výmenu obsahu medzi osobným zariadením a zdieľaným displejom. Tieto techniky sú založené na prenose videa, rozšírenej realite a analýze pohľadových dát. Okrem interakčných techník sme tiež predstavili mechanizmus pre získavanie, prenos a rekonštrukciu aplikačného stavu na cieľovom zariadení.
|
|
High-Quality Shadow Rendering from Complex Light Sources
Navrátil, Jan ; Sochor, Jiří (referee) ; Navrátil, Jan (referee) ; Zemčík, Pavel (advisor)
V interaktivních aplikacích jsou stíny tradičně zobrazovány s pomocí algoritmu založeným na stínových mapách. Nevýhodou toho algoritmu je, že stínová mapa, reprezentovaná texturou, má pouze omezené rozlišení. To může vést k nepěkným vizuálním artefaktům objevujících se na hranách stínů. Tato práce představuje postup, který je založen na vylepšené deformaci textury. To umožní zobrazit scénu obsahující složité světelné zdroje, zredukovat artefakty na hranicích stínů a také vylepšit kvalitu stínů bez ohledu na typu scény a její konfiguraci.
|
guest ::
