|
USB Host with PIC Microcontrollers
Kučera, Pavel ; Janoušek, Vladimír (referee) ; Hanáček, Petr (advisor)
The aim of master thesis is implementation of USB host in a microcontroller PIC. The thesis contains description of ways of peripherals to computer connections with detailed description of USB bus. There are also discussed several approaches in implementations USB host for embedded systems. A concept of layered USB host system is designed on the basis of analysis of the state of the art. Finally, the designed system is implemented in microcontroller. Resulting firmware of development kit is tested on real USB device.
|
|
Methods of interleaving data
Soudek, Michal ; Němec, Karel (referee) ; Křivánek, Vítězslav (advisor)
The initial part of my work is dedicated to overall introduction into the transmission systems and its categories. Further the work is focused on dividing of security codes which are used for transmission systems. In the next chapter is analyzed the problems of error origin, mathematical transcription of errors, categorizing of errors which can generate during transmission. The following chapter deals with description of convolutional codes describing security against errors, principle of serial consecution interpretation on parallastic consecution and visa versa. Here is outlined problems of convolutional codes input. In the next part are mentioned three convolution codes which are used for security against burst errors. In the next chapter is mentioned problems of message interleaving and description of used methods, how they originate and detailed description, how the errors are eliminated with the help of long segment interleaving. In the next chapter are described techniques which are used for clustered errors suppression. The last chapter is dedicated to the practical part of my thesis. There are detail descriptions and simulation techniques how the security of non-secure section is developed, transmission on line, burst errors induction on transmitted secure data and consecutive amendment or clustered errors division in transceiver. For the simulation there were utilized three convolutional codes for clustered errors amendment and two interleaving techniques.
|
|
Public transport connection of the new Brno Railway station
Bartoň, Daniel ; Pavlíček, Jan (referee) ; Holcner, Petr (advisor)
The diploma thesis deals with the issue of the availability of the new Main Railway Station in Brno, its transfer to other location, modernization or reconstruction and its connection to the public transport system. It focuses in particular on the public transport in Brno affected by the transfer of the railway station and on regional passenger railway transport in the vicinity of Brno. It describes, evaluates and assesses various variants of the transfer of the new railway station in terms of time savings for passengers traveling through the Main Railway Station and their source or destination of travel is in Brno or in the vicinity of Brno. The most suitable appears variant B - the transfer of the station under Petrov.
|
|
Ejection mechanism automotive starter pinion
Sláma, Miloslav ; Janda, Marcel (referee) ; Hájek, Vítězslav (advisor)
The thesis describes ways ejection pinions automotive starter and evaluation of the advantages and disadvantages of each solution. The first chapter deals with the principle of operation of DC motors and starters parameters. In the second part, the individual systems are theoretically discussed in terms of design and their advantages and disadvantages. The third part is focused on the most common system, which is analyzed in terms of mechanical and electrical reliability. The last point of the work is to design an experimental analysis Reach starter pinion.
|
|
To Dvur Kralove by train - Transfer Terminal in Dvur Kralove nad Labem
Turčanová, Terézia ; Vrbka, Jan (referee) ; Ponešová, Barbora (advisor)
The task of this Bachelor thesis is to create an architectural and urban design of the transfer terminal in Dvur Kralove nad Labem. Therefore in my proposal, I design and integrate the transfer point into an existing built – up area, so it meets the demands of the 21st century passengers, encourages visitors to explore the city and meets daily needs and activities of the local community. Train and bus terminal together with various other services are combined under one roof to create a meeting place. The center of the area is an elevated glazed terminal hall that covers and connects various functions in the separate blocks within it. A distinctive unifying element of the entire terminal is the overlapping roof in the space around the hall and over platforms. The shape of pillars under the roof refers to the character of the industrial zone located nearby and the "lace-shaped" crossing of the ribs under the ceiling creates a specific atmosphere. The shelter over bus stops corresponds with the roof. Simultaneously it fills the interrupted street line on the Ulica 28. rijna street. The project of the area together with its surroundings also includes places for park greenery as well as for living that complement the missing public spaces in this part of town. The scale of objects is chosen with regard to the character of the site and its importance and location within the city, which has about 16 000 inhabitants.
|
|
Transformation of Crafts Company and Its Next Development
Dacíková, Marie ; Vaškovičová, Jana (referee) ; Koráb, Vojtěch (advisor)
This thesis addresses the issue of transfer of trade to a limited liability company and its further development. The work deals with tax, accounting and administrative formalities, that are connected with this transformation. The change is applied to the company, which operates on the basis of a trade license. A theoretical part of the analysis shows the internal and external environment, the most important concepts of tax accounting and the transition to management accounting. Practical section first introduces and analyzes the business, makes an inventory of assets and liabilities, quantifies tax implications of the transfer. At the end, recommendations for further development of the company are designed.
|
|
Wakeboard winch
Valenta, Jan ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
This bachelor‘s thesis contains a description of the individual parts construction of winch for wakeboarding with types of serially-produced models of winches. The work includes custom design and construction solutions of winch with strength calculations and drawings.
|
| |
|
To Dvur Kralove by train - Transfer Terminal in Dvur Kralove nad Labem
Uherková, Ivona ; Strnad, Roman (referee) ; Ponešová, Barbora (advisor)
The subject of this architectural study is to design a new transfer terminal in the dairy town of Dvur Kralove nad Labem. The project seeks to take into account the main town planning principles and to add the city to the architectonically interesting solution of the given parcel while fulfilling the functional requirements of the project promoter - the city of Dvur Kralove nad Labem. The purpose is to create a building and public space in the city that will enhance its quality and satisfy the needs of both residents and passengers.
|
| |