National Repository of Grey Literature 120 records found  1 - 10nextend  jump to record: Search took 0.00 seconds. 
Braking of an induction machine
Mareček, Šimon ; Janda, Marcel (referee) ; Mach, Martin (advisor)
The work is focused on the braking of an induction engine and the risks associated with it. In the first part, there are readers acquainted with the technical parameters of the induction engine, which is used for simulations. The second part focuses on the simulation program Ansys Maxwell and the finite element method. In the third part, there are readers introduced to a general description of the induction machine. The fourth part consists of countercurrent braking. The penultimate part is devoted to dynamic braking. The last part contains a brief introduction to generator braking. The chapters focused on braking are supplemented by simulated waveforms.
Cooling of electric machines
Benčo, Branislav ; Mach, Martin (referee) ; Janda, Marcel (advisor)
The bachelor thesis is focused to the calculation of cooling of electrical machines by various methods and their subsequent comparison. This work is divided into several chapters in which the methods are described including when and in which cases is suitable for calculation.
Braking of an induction machine
Mareček, Šimon ; Janda, Marcel (referee) ; Mach, Martin (advisor)
The work is focused on the braking of an induction engine and the risks associated with it. In the first part, there are readers acquainted with the technical parameters of the induction engine, which is used for simulations. The second part focuses on the simulation program Ansys Maxwell and the finite element method. In the third part, there are readers introduced to a general description of the induction machine. The fourth part consists of countercurrent braking. The penultimate part is devoted to dynamic braking. The last part contains a brief introduction to generator braking. The chapters focused on braking are supplemented by simulated waveforms.
Bearing diagnosis of electrical motors
Kratochvíl, Lumír ; Janda, Marcel (referee) ; Vítek, Ondřej (advisor)
This work breaks down the individual phenomena and findings that have as a common denominator the emergence of irreversible processes leading to damage to bearings in electrical machinery and equipment. The introduction describes the basic description and division of bearings with the recommended methods of their basic operation. The following chapters then deal with the individual sources of damage, diagnostics of individual damages, or examine in more detail the accompanying phenomena of bearing damage. In the first practical part of the work, damaged bearings are physically analyzed and their diagnostics is performed on an electron microscope. The second part of the work deals with vibrodiagnostics and the use of appropriate methods to determine the condition of the rolling bearing and then the location of the source of vibration at error frequencies.
Vibrodiagnostics of electrical machines
Boháček, Daniel ; Vítek, Ondřej (referee) ; Janda, Marcel (advisor)
This thesis deals with methods of vibration analysis in electric rotating machines. From the beginning, it is necessary to explain the basic concepts and introduce the issue of vibration. Next time, the work is focused on sources of vibration in electrical machines. Defects on electric rotating machines causing vibrations are described. Sensing is performed using sensors of deflection, speed and acceleration. The measured signal needs to be adjusted and filters, approximations and sampling will cover this in the next chapter. The main objective is the methods of analysis, which include the best known in the field of frequency analysis (FFT) and the envelope method in the time domain. This includes other methods such as Kurtosis factor, Crest factor, etc. There is also a basic block diagram for measuring vibrations. This block diagram is programmed and has a graphical user interface. The last part is an evaluation of the measured data of the engines.
Electrodynamic magnetic bearing design
Pavluš, Ondřej ; Janda, Marcel (referee) ; Rúra, Dávid (advisor)
High speed applications demands with a need for lower energy consumption lead to designing new types of bearings. In the last decades magnetic bearing, which would be able to obtain passive stable levitation using regular materials at room temperature, has been searched. This has lead to development of electrodynamic bearing based on eddy currents principle. Currently the electrodynamic bearings are still not fully explored and further research is needed. The aim of the work is to describe the theory about modern magnetic bearing, analysis and design of electrodynamic bearing according to given parameters. The finite element method is used for further analysis and evaluate behaviour of its properties.
Problems of revision activity and processing of revision loom Dornier HTV4 / SD
Kratochvíl, Lumír ; Janda, Marcel (referee) ; Veselka, František (advisor)
This work initially deals with a brief historical development of standards, according to which are revised on electrical equipment. It also focuses on legal and the legal aspect of the issue, which includes a more detailed listing from applicable legal provisions. They contain valid texts that they describe specific obligations and sanctions for possible situations caused by irresponsible acting. In the following part, my bachelor thesis deals with the analysis of available documents for a specific weaving loom with a closer explanation of the principle of operation of the equipment and focusing on individual risks arising from it. According to the thematic revision process created, it is subsequently carried out at the given facility with subsequent evaluation of acquired knowledge and findings.
Calculation of load on the electric drive of the gate
Randa, Daniel ; Veselka, František (referee) ; Janda, Marcel (advisor)
This thesis deals with the construction of drives for self-supporting gates. The main parts from which the drive is folded are not discussed here. In addition, the main points of load are solved which arise on the self-supporting gate and it´s contact with the guiding, carrying carts and movement elements. And here is explained what needs to be taken care of by the drive to accommodate the loads, which all aggravate the movement of the structure. in the work are also presented the load types of load calculations by which the drive parameters can be checked for suitability for the application.
Impact of winding on induction machine characteristics
Mikmek, Vladislav ; Janda, Marcel (referee) ; Mach, Martin (advisor)
This thesis deals with the analysis of a three-phase winding of an induction engine. After the theoretical introduction concerning different types of windings, two types of their analysis and the importance of the winding factor, two methods of analysis and design tools are explained: Görges diagram and Tingley scheme. This scheme is then used for the design of all possible variants of winding for a certain number of stator slots and the theoretical shape of magnetic field is analysed. The next step is a deeper software analysis of the engines with variants of windings with different coil pitches and number of conductors per slot. Especially the finite element method is used in this part. The obtained values and their characteristics of the simulated engines are compared numerically and graphically. Then the changes of important values for different windings are described. The optimal winding according to chosen requirements is chosen.
Problems of measurement and evaluation of earth resistance
Šindelář, Petr ; Janda, Marcel (referee) ; Veselka, František (advisor)
This work deals with the measurement of earth resistance, definition, substances causing earth conductivity, basic norms for carrying out grounding revisions and effect of earth resistance on securing and protection element. In the introduction there is theoretical analyzing of grounding issue and principles for the measurement of parameters, which are important for the protection of persons and animals in order not to touch exposed conductive part accidentally, protection of equipment against high fault current and dangerous surges while the correct function of the connected electrical equipment. In the next part there are described methods of earth resistance and soil resistivity measuring. The practical part of the work summarizes the results of practical measurements in individual places with different measuring device.

National Repository of Grey Literature : 120 records found   1 - 10nextend  jump to record:
See also: similar author names
5 JANDA, Marek
20 JANDA, Martin
2 JANDA, Milan
5 Janda, Marek
20 Janda, Martin
2 Janda, Matyáš
6 Janda, Michal
2 Janda, Milan
2 Janda, Miloslav
2 Janda, Miloš
Interested in being notified about new results for this query?
Subscribe to the RSS feed.