|
|
Collaborative robot control by PLC
Novotný, Jiří ; Benešl, Tomáš (referee) ; Macho, Tomáš (advisor)
This bachelor thesis deals with the control of a collaborative robot using a PLC. To implement this work is used collaborative robot YuMi from ABB and PLC from Siemens of latest series S7-1500. We will get acquainted with products which have been used in project and with the development environment for PLC (TIA Portal) and for robot (RobotStudio). We define the requirements for the communication interface between the robot and the PLC. We will describe a demonstrating task requiring control of a robot using a PLC. The task demonstrates a real application for the end user. Then we implement PROFINET communication interface and implement the described task for the robot. The final solution is then tested in real production line.
|
|
|
ABB RobotStudio - robot control using PLC B&R Automation
Mittaš, Eduard ; Lacko, Branislav (referee) ; Lang, Stanislav (advisor)
The goal of this bachelor thesis is to demonstrate various ways of communication with the controller of the robot as well as consecutive controlling of this robot. The simulation will be achieved by using the TCP/IP protocol, while the communication in the laboratory with real equipment will be assured by Profinet bus. This thesis will show also another solution, which is simple communication and connection between Microsoft Visual Studio and Robotstudio by using TCP/IP protocol. Initial chapters will describe ABB and B&R Automation companies, their control systems, history and information associated with them. Following chapters will serve as a guide describing creating of application in each of three presented solutions.
|
|
|
Design of the control program for industrial robot IRB 120 using RobotStudio software
Nevřiva, Václav ; Lang, Stanislav (referee) ; Parák, Roman (advisor)
The aim of the bachelor thesis is to design a control program for a selected laboratory task in RobotStudio program, its implementation for the industrial robot IRB 120 from ABB Robotics and to verify the proposed solution by simulation and test on real hardware. The introductory part introduces ABB, company products and the development environment. The following chapters describe the selected laboratory task, its solution and testing of the proposed program. The bachelor thesis was extended with the design of user interface for controlling the task and demonstration of working with the robot using virtual reality.
|
|
|
Virtual commissioning of robotized workplace for cold spraying
Miklis, Peter ; Holub, Michal (referee) ; Vetiška, Jan (advisor)
The diploma thesis deals with the virtual commissioning of robotized workplace for cold spraying. The theoretical part of the thesis contains an overview of the current state of knowledge in the field of virtual commissioning, the theory of crating HMI user environments, deals principles of the Rapid programming language as a tool for controlling industrial robots and analysis of robotic workplace components. The practical part defines the structure of the proposed user program and user environment, which are created using software tools Robotstudio and Screenmaker. The last part discusses in detail the steps during the implementation of the created program together with the HMI into commission, which is associated with the testing of functionalities on a real device for cold spraying. The diploma thesis also includes a user manual created for operating an industrial robot.
|
|
|
Virtual commissioning of the robotized workplace for arc welding
Adolt, Lukáš ; Pavlík, Jan (referee) ; Vetiška, Jan (advisor)
This diploma thesis is focused on the design of a robotic workplace for arc welding and its subsequent virtual commissioning. The summary deals with knowledge from industrial robotics and arc welding, the system analysis is focused on the composition of the workplace and the principle of arc welding, including acting influences. In the practical part, several variants of the solution are proposed, the most suitable variant is processed in the form of a 3D model. This model is then simulated, including all processes, a control program is created, and virtual commissioning of the workplace is demonstrated.
|
|
|
Digital commissioning of a robotic production system for palletizing
Zajíček, Matouš ; Kočiš, Petr (referee) ; Vetiška, Jan (advisor)
This diploma thesis deals with the virtual commissioning of a robotic palletizing cell. The theoretical part of the work describes the motivations for the use of automatic palletizing and common elements of palletizing cells using an industrial robot as well as the principle, tools, and benefits of virtual commissioning. The practical part of the work describes the process of creating elements of the cell in Robotstudio software and creating PLC control logic using TwinCAT3 software
|
|
|
FLUID HANDLING USING THE ABB YUMI PLATFORM – PIPETTING
Smolinský, Michal ; Parák, Roman (referee) ; Matoušek, Radomil (advisor)
The aim of this bachelor thesis is to create a control program for the collaborative robot IRB 14000, whose task is the accurate dosing of liquid using a pipette. The introduction introduces the collaborative robotics industry, followed by a description, development and ABB products. After the introduction of the model of the used robot, attention is paid to the issue of liquid handling, which includes the selection of a suitable pipette. The application performed by the robot and its creation forms the rest of the work, which includes, in addition to the original pipetting task, an extension in the form of a separate task. The aim of this task was to prepare a mixed drink for the purpose of presenting the used robot. The following last part describes the process of testing both tasks on a real prototype robot, the product of which is a video, which is part of the appendix.
|
|
|
Digital commissioning of a robotic production system for machine tool operators
Simandl, Tomáš ; Knoflíček, Radek (referee) ; Vetiška, Jan (advisor)
This diploma thesis deals with virtual commisioning of robotic production system for machine tools operators. This thesis is based on real workplace, which is located in the laboratory of the Institute of Production Machines, Systems and Robotics at the BUT. The issues of virtual commisioning, data validation and workshop analysis are described in the teoretical part of the thesis. In the practical part of the thesis there is described creation of components in the RobotStudio, robotic programm, PLC program and also virtual commisioning itself.
|
|
|
Digital commissioning of robotized workplace for cold spraying of rotating parts
Šimůnek, Petr ; Bražina, Jakub (referee) ; Vetiška, Jan (advisor)
This work deals with the virtual and later real commissioning of the workplace for cold spraying of rotating parts, which is located in the laboratories of the Institute of Materials Science and Engineering, Faculty of Mechanical Engineering, Brno University of Technology. The workplace put into operation in this way serves the employees of the mentioned institute for experimental activities in the field of cold spraying. The theoretical part of the thesis describes all the essentials associated with virtual commissioning and the theory of cold spray. The practical part then deals with the creation of a robotic program, including the user interface, which is used to control the workplace. Part of this diploma thesis is also the realization of the connection between the external motor driver and the robot controller via the PROFINET communication bus.
|
|
|
ABB RobotStudio - sample control program for stationary robot
Machala, Jan ; Lacko, Branislav (referee) ; Lang, Stanislav (advisor)
The goal of this bachelor thesis is to create sample control program executing sequence of robot movements and then its implementation on real robot IRB 120. For communication between robot and PLC was used program created in integrated development environment Microsoft Visual Studio. In the introduction are briefly described history of robotics and categories of robots. In the following chapters are described company ABB Group, its products and company B&R Automation and its products focused on control systems. Next chapters describe the solution of the given laboratory task and briefly explain settings of the individual programs. The thesis attachment contains video of the working project tested on real robot.
|
guest ::
