|
|
Indirect air heating
Beneš, Josef ; Adam, Pavel (referee) ; Počinková, Marcela (advisor)
The master Thesis deals with indirect air heating in air handling units. In the theoretical part of the thesis the categories of heat exchangers are defined according to their positioning in ventilation system, used material and type of heat transfer fluid. To the issue of calculating heat exchanges through heat exchangers and description of different kinds of regulation of primary heat transfer fluid is dedicated a separate chapter. The experimental part of the thesis deals with determining performance of current air heat exchanger at set thermal gradient with various heat transfer fluids. In the calculating part of the Thesis, based on measured values, are suggested two possible solutions for use of technological waste heat. Final evaluation of particular solutions was based on the criterion of efficiency usage and implementation investment costs.
|
|
|
Design of heating of primary school
Pánková, Pavlína ; Vyhlídalová, Karolína (referee) ; Horká, Lucie (advisor)
The goal of this master's thesis is to design the heating system for the existing building of an elementary School. The thesis is divided into three parts. In the first theoretical part, I discusses heat transfer methods, the influence of covers on heating elements, and the determination of radiant and convective power components. The second part solves the heating system's design in three heat source variants. The first option comprises six heat pumps. The second option includes a combination of direct evaporation for air handling units and heating using heat pumps. The third option involves the installation of gas condensing boilers. At the end of the second part, a technical report is written and drawing documentation is attached. The last third part is dedicated to the experimental measurement, in which the effect of the front plate on the performance of the heating element was ensured.
|
|
|
Temperature measurement in electric machines
Halfar, Ivo ; Huzlík, Rostislav (referee) ; Janda, Marcel (advisor)
The bachelor's thesis Temperature measurement in electric machines deals with beginning and exuding of the heat of electric motors and measuring of the temperature. The temperature is one of the most important values in diagnostic. High temperature could damage an isolation and it could tend to destroy of the whole machine. The temperature influences their magnetic properties on motors with permanent magnets. If you reach the Curie temperature it could come to its demagnetisation. Measuring of the temperature is important to verify allowable warming of motor or more precisely its spooling. The measuring of the temperature is needed for making motors with minimum of charges and its worth at the end. We could use two methods for measuring the temperature. It is contact and noncontact method. Warming and decomposition of the temperatures it is possible to appoint also with help of theoretic computations which are getting of the method of final elements. A lot of computer programs is using this method. Because of the existence of many sorts of electric motors, one of the viewpoints is the principle of working, another one is the construction. I concentrate on problems of asynchronous motors. In this bachelors thesis I have done theoretical calculation and contact and noncontact method of measuring of warming of the asynchronous motor.
|
|
|
Thermomechanical tire model
Vaníček, Jan ; Štětina, Josef (referee) ; Porteš, Petr (advisor)
This diploma thesis is about thermomechanics of passenger car tires. The research part dealing with existing tire models is followed by the practical part. The practical part is based on the designs of thermomechanical models. The first model determines a dependence of temperature on the air pressure inside a tire when a temperature changes. The second thermomechanical model captures all the heat fluxes which affect a tire while a vehicle is in motion. The third thermomechanical model calculates temperatures of parts of the tire during driving tests. All models are programmed in MATLAB.
|
|
|
Study efficiency of modern thermal insulation for buildings
Šot, Petr ; auditor, Karel Trojan, Brno, energetický (referee) ; Šťastník, Stanislav (advisor)
The bachelor´s thesis deals with the problem of thermoreflect insulation. The small part of thesis focuses on the energy demand of buildings and its problems. Then the greater extent is analysed problems by heat transfer of material. It includes effects arising from the individual methods of heat transfer and defines the level of expression of individual methods of heat transfer in materials. The thesis presents an overview of experimental methods for determining thermal insulating properties of insulators. Then there is shown a selection of the most widespread insulation materials used in today´s construction. It includes the division of insulators in terms of used materials and subsequent classification of the most used materials in these groups. Another part of thesis deals with the thermoreflect isolation. There are mentioned the necessary concepts for the study of thermoreflect thermal insulation, which include the emissivity surface, the coefficient of mutual radiation and translucency of the material. Then there is described the method heat transfer of thermoreflect isolation. On the next there are presented experimental methods of determining thermal insulating properties thermoreflect thermal-insulating material. The thesis also includes a practical part, which contains the measurement results on a small range of samples taken termoreflection insulators. In the end there is mentioned a brief realization of thermoreflection thermal insulation materials in buildings.
|
|
|
Passive heat dissipation using carbon-based material
Genco, Ondřej ; Brázdil, Marian (referee) ; Pospíšil, Jiří (advisor)
The content of the diploma thesis is evaluation of the usability of carbon composites in the space industry. The aim of this work is to assess whether carbon composites can find application in mechanical systems of passive thermal protection of artificial objects. Model examples demonstrate the principle of operation of selected passive thermal protection. The evaluation is realized based on the results of thermal analysis. Analytical formulas from field theory of heat transfer are used as a calculation method. The diploma thesis consists from two parts. The theoretical part briefly describes the mechanisms of heat transfer, selected types of passive thermal protection and properties and applications of carbon composites. The practical part consists of the assignment, calculation and evaluation of three examples. The results show that carbon composites can compete with commonly used materials for specific requirements.
|
|
|
System level analysis of thermal properties of integrated circuits
Vaněk, Martin ; Jirák, Josef (referee) ; Frk, Martin (advisor)
Hlavním cílem této práce je shrnout základní poznatky o tématech spojených s teplem, se zaměřením na aplikace v elektrotechnice, a provést měření tepelného odporu pouzder integrovaných obvodů. První část je praktická a zabývá se teorií přenosu tepla, tepelnými vlastnostmi materiálů a metodologií JEDEC pro měření tepelných vlastností pouzder integrovaných obvodů. Druhá část se skládá ze sestrojení teplotní komory s přirozeným prouděním, návrhu testovacích desek plošných spojů a tepelných měření. Na závěr je shrnuta metodologie pro měření tepelného odporu čip-okolí spolu s uvedením praktických poznatků z předchozích měření. Tato práce může sloužit jako základ pro další vyhodnocování tepelných vlastností integrovaných obvodů a pro ověřování přesnosti tepelných simulací. Také může pomoci při vyhodnocování tepelné vodivosti desek plošných spojů.
|
|
|
Verification of thermal-insulation properties of the foil materials
Šot, Petr ; TROJAN,, Karel (referee) ; Šťastník, Stanislav (advisor)
The master´s thesis deals with verification of thermal insulating property of thermoreflection foil insulations. The teoretical part of thesis focuses on the energy demand of buildings, the problems of heat transfer material, terms required for study of thermoreflection thermal insulation and experimental methods for determination of thermal insulating properties of insulators. In the next part the chapter is accompanied by an overview of the most common insulation materials which used in construction. The last part of teoretical part is devoted to the description of thermoreflect formation and analysis of the spread of thermal insulating layers of thermoreflection thermal insulation. The first part of thesis is devoted to the use of thermoreflection therm insulation in buildings. The second part of thesis is devoted to the design, assembly and calibration of the measuring device that uses a method of protected warm chamber. It is declared as a binding method of detection of the heat transfer performance of thermoreflection thermal insulation. The developed measuring device allows detection of endpoints in some direction of propagation of heat. Measurment of heat transfer coefficient devoted the third part of practical part. This part contains a description of the samples used for the measurement of the heat transfer coefficient. In the fourth chapter of the practical part are presented the results of the heat transfer coefficient measurments on selected samples of thermoreflection foil insulation. It is shown the characteristic of heat transfer coefficient of individual samples, the dependence of the heat transfer coefficient on the position of the sample in the measuring device and the recommendation of an appropriate use of sample in the works for the climatic conditions of the Czech republic. The work concludes the chapter of comparing and evaluating of all samples with practical recommendations.
|
|
| |
|
|
Heat transfer by thermal radiation
Budovec, Michal ; Svoboda, Josef (referee) ; Foral, Štěpán (advisor)
This bachelor’s thesis deals with heat transfer, specifically with thermal radiation heat transfer by convection. The work is divided into theoretical part and calculations. The theoretical part describes basic thermomechanical notions and all kinds of heat transfer with the emphasis on heat transfer by radiation with convection. Heat conduction chapter describes the basic types of heat conduction. In chapter Heat transfer by convection are given criterion equations and examples for determining dimensionless numbers. Radiation heat transfer chapter focuses on heat transfer between two bodies and the radiation factor. With this equations and dimensionless numbers are quantifying variables in the calculation part. In the theoretical part is wrought calculation for a given case of heat transfer in the air and vacuum. The calculation is experimentally verified, from which is wrought protocol with the measurement and comparison with calculation and measurement in the air and vacuum.
|
guest ::
