|
|
Effect of electromagnetic compatibility on the operation of automotive LED drivers
Vinklerová, Viktorie ; Šteffan, Pavel (referee) ; Levek, Vladimír (advisor)
The diploma thesis deals with electromagnetic compatibility, its bonds, measuring devices and interference sensors. Furthermore, the thesis includes a discussion of nearfield probes, standards CISPR25 and TEM chamber methods. It describes two integrated circuits NCV78964 and NCV78514 LED drivers from onsemi and their modules. The aim of the work is to design the measurements, then to implement and evaluate them. Finally, to optimize the operating parameters of the drivers with respect to both EMC and driver functionality.
|
|
|
Modeling of temperature phenomena in Li-Ion cells
Grézl, Vojtěch ; Sedlařík, Marek (referee) ; Vyroubal, Petr (advisor)
This thesis deals with the issue of heat generation in Li-ion batteries, which can have a negative impact on the battery properties and functionality. The thesis can be divided into two main parts. The theoretical part focuses on the theoretical description of Li-ion batteries, heat generation, thermal effects, ideal operating temperatures, modelling of these situations, the occurrence of different types of abuse and the consequences that can arise from incorrect or inadequate thermal management. The practical part focuses on the analysis of the results from the discharge temperature measurements for different load values C and the initiation of the effect known as thermal runaway for 18650 Li-ion cell, and then on how to simulate these behavior in the Ansys Fluent.
|
|
|
Diagnostics of the source part of photovoltaic power plants
Turinský, Matěj ; Burian, František (referee) ; Fiedler, Petr (advisor)
The aim of this thesys is to define development requierements for HW of monitoring device for the source parts of photovoltaic power plants and afterward implement sufficient SW equipment. Thesys analyzes types of faults within a power plant its consequences and possible ways of detection. It is followed by selection of measurements and HW components for monitoring device, its complementation and implementation of control program for the evaluation unit. Program should manage a measurements with afterward diagnosis and communication with surrounding systems according to the G3-PLC standard.
|
|
|
The use of interdisciplinary relationships in teaching physics at elementary school
PECHOVÁ, Veronika
The author of this diploma thesis continues in her bachelor thesis. The author still writes about intersubject relations of Physics and Biology at elementary school. The thesis includes some suggestions for intersubject learning. There are also a few original intersubject projects, worksheets for pupils and there are also some detailed didactic analyses and methodical comments for teachers. The thesis also includes a didactic activity called "Biophysical relay" which was evaluated as the best piece of work in a competition Student innovation of practice (abbreviated SIP) at Faculty of Education at University of South Bohemia in České Budějovice in 2023.
|
|
|
Digital oscilloscope with USB interface
Vadinský, Václav ; Beneš, Petr (referee) ; Havránek, Zdeněk (advisor)
The work deals with design and implementation of hardware and software oscilloscope to a PC. A communication with PC is via USB interface from which is the oscilloscope powered. The oscilloscope is equipped with 2 measuring channels with vertical resolution 12 bits and maximum sampling frequency 80MHz. Any adjustment of parameters is performed using the PC. The work also deals with manner of recording, synchronization of measurements and sending the measured data to PC and its subsequent processing and evaluation.
|
|
|
Measurement of the fiber optical transport links
Ambrož, Jan ; Škorpil, Vladislav (referee) ; Reichert, Pavel (advisor)
This thesis deals with the measurement of optical transport links. In particular, the measurement of attenuation, chromatic and polarization mode dispersion. Specic me- asurement systems using a WDM and passive optical networks. Within each chapter are listed the causes and eects restrictive factors and methods of measurement. In chapter Attenuation measurements are described radiation and material loss as the main causes of depression. Methods whitch are described two lengths, insert loss and reectometri. Chromatic dispersion at dierent speeds of various wavelengths limits systems with high transfer rate. Methods of measuring the phase shift, dierential phase shift, pulse time delay and interference. Polarization mode dispersion is a random phenomenon caused double refraction, must be measured after completion of the route. Scanning wavelen- gth, traditional and general interference, reectometri and the polarimetric are methods of measurement. It described the measurement of WDM systems in three stages of its build. In brief PON networks are presented, with the specicities of the measurement over splitter. Most chapters are supplemented by the results and conclusions of practical measurements. At the end of the work are given by the two standards deal with the measurement of optical transport links.
|
|
|
The effect of optical fiber attenuation on the capacity of optical traces
Žák, Ondřej ; Škorpil, Vladislav (referee) ; Reichert, Pavel (advisor)
The essence of this thesis is the creation of complex insight on optic fibre attenuation. There is successive steps explained mechanism of optical attenuation and characterized its spectral dependence. We are describing primary elements of optical attenuation, its sorts and their own spectral dependence. Bachelor´s thesis is explaining requirements of transmission system to spectral characteristic optic fibre and influence of optic fibre attenuation on capacity of optical trace. Output of bachelor´s thesis is program solution of designed mathematical model for calcula-tion spectral dependence of optical attenuation. Program is realized in MATLAB and there is furthermore added version in Microsoft Office 1997-2003. Created program is able to ap-proximate points data obtained from measurement of optic fibre by using Lagrange interpola-tion polynomial and Rayleigh scatter interlay.
|
|
|
Workpiece geometrical accuracy measurement possibilities
Tvardek, Michal ; Musil, Martin (referee) ; Blecha, Petr (advisor)
The aim of this bachelor thesis is to do a research in the field of measurement of geometrical accuracy of workpiece. In the introduction I deal with the description and graphic interpretation of geometrical tolerances and parameters of the surface texture, including their illustration in the drawing documentation. Then I briefly summarized the major measuring methods of the chosen geometrical features and gear wheels. I also described the current equipment for measuring geometrical accuracy and surface texture for both inprocess and postprocess usage; meanwhile I tried to accentuate their main features and advantages.
|
|
| |
|
| |
guest ::
