|
|
Design and Implementation of the Component for Comunication with PCI Interface
Janoušek, Michal ; Kořenek, Jan (referee) ; Martínek, Tomáš (advisor)
This masters thesis deals with design of the component facilitating communication between PCI bus and user component. Designed component is simplifying the communication protocol between designed and user components, while advanced functions of PCI bus are preserved. Target platform is COMBO6-PTM card containing FPGA with Spartan 3 technology. Communication with PCI bus is mediated by PLX component. Thesis also contains design of simplified communication protocol.
|
|
|
Control electronics for biohazard box
Pavlas, Lukáš ; Žák, Jaromír (referee) ; Macháň, Ladislav (advisor)
The submitted work describes design of the electronic working condition monitoring system for laboratory Is analyzed in detail the issue of categorization of laboratory laminar flow hood, determine characteristic of operating variables and their monitoring. Next is described a functional specification of the whole device and it follows the design concept of the possible solutions along with a selection of components for implementation. At the last part is described proposal communication protocol for communication between a master unit and auxiliary slave unit.
|
|
|
PDA software for robot soccer
Uhlíř, Luděk ; Honzík, Petr (referee) ; Hrabec, Jakub (advisor)
Robotic soccer is a game like a real soccer but here the game is played by robots. The rules are the same, only there are few exceptions (foul, penalty kick, stalemate situation). Game is running without the human intervention. Just a human referee is supervising the game. Two teams are attending the game. Each of them has a control computer. The control computer is the brain of the game. It has a camera, it is making decisions for the next step of robots and sending them configuration data. The thesis deals with testing of communication interface and designs the new communication protocol for the next generation of the robots. The testing is provided by pocket pc Palm TX. It will send data over the Bluetooth interface to the control pc and will configure particular constants, like constants of PID regulator and an address of a robot. This will be provided by the IrDA interface.
|
|
|
A Hardware-acceleration Protocol Design for Demanding Computations over Multiple Cores
Bareš, Jan ; Dvořák, Vojtěch (referee) ; Šťáva, Martin (advisor)
This work deals with design of communication protocol for data transmission between control computer and computing cores implemented on FPGA chips. The purpose of the communication is speeding the performance demanding software algorithms of non-stream data processing by their hardware computation on accelerating system. The work defines a terminology used for protocol design and analyses current solutions of given issue. After that the work designs structure of the accelerating system and communication protocol. In the main part the work describes the implementation of the protocol in VHDL language and the simulation of implemented modules. At the end of the work the aplication of designed solution is presented along with possible extension of this work.
|
|
|
Annotation Server Modules
Strecha, Juraj ; Kouřil, Jan (referee) ; Dytrych, Jaroslav (advisor)
The thesis deals with an Annotation server module design and its implementation in the Decipher project. The purpose of the module is to suggest annotations for document that the user works with. One will find the Annotation server and the SEC Store API server description in the beginning of the thesis. A major part of the document presents a design and an implementation of the solution. Standalone part of the thesis deals with a module functionalities testing in the system environment. The communication protocol between both servers definition and description is also included in this document.
|
|
|
Control of Musical "Combo"
Jeřábek, František ; Milet, Tomáš (referee) ; Zemčík, Pavel (advisor)
This thesis focuses on creating a pedal controller for guitar combo Yamaha THR10 using Raspberry Pi Zero W microcomputer and a mobile application for configuration of the controller. It describes analysis and implementation of previously unknown protocol used for communication between guitar combo and configuration application. It also describes the creation of custom protocol used in internal communication and textual protocol in JSON for communication between pedal controller and mobile application.
|
|
|
Novel Hybrid One-wire Bus for Microelectronic Systems
Levek, Vladimír ; Bajer,, Josef (referee) ; Husák, Miroslav (referee) ; Šteffan, Pavel (advisor)
The thesis is focused on the research and development of a new hybrid one-wire bus with special use enabling microelectronic integration. The bus, its physical layer and protocol have been developed based on applied research to meet the complex requirements of a new application group. These requirements are especially laid on the bus robustness and its immunity to interference and to work under real operating conditions. Part of the thesis is a description of existing solutions of one-wire buses, definition of current solutions and setting of goals for research of the new bus. Further are made the design of protocol and operating parameters of the bus operating in low power and power mode. In conclusion, the thesis deals with the practical verification of the proposed solution and there is also suggested a perspective of follow-up research in this area.
|
|
|
Integrated design smart house or building
Tesař, Luděk ; Novotný, Jan (referee) ; Bátora, Branislav (advisor)
The aim of this diploma thesis is to make a methodical manual for planner of system wiring in smart/intelligent houses. Introductory part of the thesis lays stress on requirement of systems integration in an intelligent building with necessity of their mutual cooperation and communication. The base of the integration is appropriately chosen building control system including used technologies. The next chapter acquaints with requirements of legal regulations and valid technical standards relating to buildings. After that the thesis deals with technical equipment and building equipment with presentation of some intelligent systems. The fourth chapter acquaints with wires bus systems and protocols used in smart buildings. Planner´s working procedures with indication of each phase of project, regulations and standards important for system wiring design are developed in detail including chosen control system. Lightning and overvoltage protection is the integral part.
|
|
|
Control of water supply for a house
Chvátal, Michal ; Richter, Miloslav (referee) ; Macho, Tomáš (advisor)
The diploma thesis deals with the design and implementation of the system that will control the water supply for the family house and its garden. The system aslo allows you to store a history that can be viewed via the web interface. The web interface also allows you to set system parameters and monitor the current status.
|
|
|
Program for inovation of the SORT control system
Šulc, Martin ; Kváš, Marek (referee) ; Zezulka, František (advisor)
The analysis for the extension of the control system and proposal of controlling program for surveillance cameras and related theoretical analysis necessary for understanding problems. Proposal communication protocol to access all functions via TCP/IP communication. Subsequent protocol implementation into control program and a programmable controller. Programming application with a user interface for camera control and basic image processing. The program also represents the server for TCP/IP communication with clients over the proposed protocol. The proposed application has to fulfill high pretensions of data streaming from cameras. Extension of the existing control system of the telescope, dome and other systems. The addition of analog measurement and control of digital inputs and outputs. Furthermore, control of stepper motors to control focusers. The embedded communication protocol will be expanded of the new instruction.
|
guest ::
