|
The War in North Africa - historiographical presentation
Drda, Václav ; Nigrin, Tomáš (advisor) ; Čížek, Martin (referee)
Topic of the thesis is war in North Africa. The goal is to show a quality of Czech literature (books, magazines) focused on the situation in North Africa during the Second World War. Firstly, I present the methods of my research and show a content of the thesis. Secondly, there is a historical introduction about wars in North Africa, to give some general information to the reader. The main part, as already mentioned, is about comparing the Czech writings. General possibilities of sorting the war history according to its focus have been presented. The first part, orientated to the magazines, is divided in relation with the traditional system of military history - articles are compared in its folder. The second part - comparison of publications is organized due to a time line because all the books are examples of modern military history. The beginning of the time line is the spring Rommel's offensive in 1942. The end is demonstrated by the battle at El Alamein and a withdrawal of the Africa Corps. The conclusion contains all the knowledge about the comparisons which has been achieved during this research.
|
|
Řešení správy dokumentů ve firmě E-solutions, s.r.o.
Švanda, Jan ; Kunstová, Renáta (advisor) ; Svěžen, Zdeněk (referee)
Presented thesis is focused to the document management system in the firm E-solutions, Ld. Selection of this firm is purposeful, because I have been working in the firm for several years. My thesis is targeted to the complex analysis of document management system (DMS) in the firm and the results of the analysis will be used for the implementation of new DMS. The target is accomplished by following steps, which can be expressed as partial concrete goals: First, the present situation of DMS in the firm is described, next, the detail description of the documents, the system should work with, is presented. Description of these documents is structured to the DMS needs. Subsequently firm processes which should DMS support are identified and analysed. These processes are converted to the optimal conditions to maximize their effectiveness in the DMS support. Integral part of the analysis is the consistent collection of the requirements to the new system. The thesis is divided into theoretical and practical part. The theoretical part describes DMS generally, explains basic principles of DMS (characteristics, documentation and functionality) and creates base line for the practical part. The more comprehensive practical part of the thesis is directed to the document management in the firm E-solutions, Ld. Presentation of the basic information about the firm is followed by detail solution of partial goals. Assessment of the achieved results creates the final part of the work. The thesis will serve in the firm or at a contactor of DMS as the base for the selection, parameterisation and implementation of the concrete DMS solution.
|
|
On-line comunication and new strategy of brand Rimmel
Jevičová, Katarína ; Postler, Milan (advisor) ; Nastaj, Lucie (referee)
The theme of the diploma thesis is new media, namely, websites and social networks. The aim of this paper is to highlight the development of Rimmel on-line strategy, assess the strengths and weaknesses against other competitors and suggest solutions for the future, which would take advantage of the potential offered by new media, especially to better target the audience. Established knowledge related to online brand Rimmel activity were analyzed and compared with the competition. The main objective of this work is to recommend, what direction should the on-line activities of Rimmel brand move in the future.
|
|
Bridge over a local road
Kováč, Daniel ; Mojzík, Petr (referee) ; Nečas, Radim (advisor)
This master thesis is focused for design, respectively for creating counterproposal of existing structure of Motorway Bridge located at D1 motorway between Jánovce and Jablonov in district Levoča in Slovakia. This bridge is over a local road. The main aim of this thesis is design, analysis and assessment of bearing elements of bridge deck. For purposes of this thesis was created three variants of bridge deck. Detailed analysis was performed on bearing construction from post-tensioned precast beam with monolithing concrete slab. Two mathematic models were used for analysis of chosen variant. First model was spatial 3D shell construction. The purpose of this model was determinate cross spreading line of other constant load and live load. Second, flat 2D model, was for determination creep and shrinkage appeared from long-term load. These effects were observed in at advanced defined time nodes. Outcomes from upper mentioned model were used from design and assessment of bearing elements of bridge deck, design prestressed reinforcement cables and concrete reinforcement rods.
|
|
Road I/69 Jasenná – Liptál - Study
Masnicová, Alžbeta ; Šenkýř, Miroslav (referee) ; Radimský, Michal (advisor)
The subject of this thesis is the extension of an existing road I/69 in the section Jasenná - Liptál with the climbing line and to secure the transport service at bus stops along the road. The road I/69 between the villages of Liptál and Jasenná has high elevation and inconvenient directional and height parameters. The basic objective of the study is to improve and increase comfort in this section. The work is editing width arrangements and takes to account connections of tertiary roads to the road I/69. In this work were created two variants with a width arrangement 12.5 and 13.5 meters.
|
|
The object of metropolitan significance on the street Benesova Brno
Bocán, Matúš ; Urban, Lukáš (referee) ; Makovský, Zdeněk (advisor)
Designed site is located near the historic city center of Brno on the east side. It is defined by Koliště street and Benešova Street. It is part of the so-called Brno ring-circuit, which originated in the 19th century after the demolishing of the town's fortifications. By function, the site can be divided into three parts. In the southern part is designed entry area with the building of metropolitan significance - city hall. This area is focused on the main pedestrian entrance from Nádražní Street and the main transport hub in front of Central Station. Metropolitan building is the main compositional and functional accent of the area. In the middle of the park is located pavillion, which forms reclined relax and rest area. In the northern part is designed multifunctional house with the main function of rentable office spaces. Along Benešova street is designed linear insulating greenery. Design of park and line of green spaces extends ,, green ring "around the historical center on the southeast side. The designed facility of metropolitan building was placed in the area so as to form endpoints in main compositional visual axis - boarding pedestrians routes from Nádražní Street and Theatre Street. In the future it envisages the realization of green spaces for rail routes in the manner of Highline Park, making it the visual endpoint from the east. The main entrance to the building is the from the square. From the western part of the Metropolitan building is designed pedestrian zone open towards urban greenery and park. In the pedestrian zone is designed commercial parterre of town hall with the possibility of creating a summer terrace, exhibitions and various artistic activities. In this usage is also involved pavillion, under which the overlay can be used for supporting the ongoing activities within the metropolitan house. From the north side of city hall is a secondary entrance to the restaurant section, which is oriented to the designed park. In the northern part is the territory compositionally enclosed by multifunctional building, which is composed in the form of a closed block with passages.
|
| |
|
Fading channel hardware simulator
Pirochta, Pavel ; Kováč, Michal (referee) ; Maršálek, Roman (advisor)
Fading channel is a communication channel that experiences different interference and fading due to multi-path signal propagation. The fading channel is designed by the finite impulse response filter with the time-varying impulse characteristic. The realisation of this filtr is based on the TDL (Tapped Delay Line) model, which simulate signal delay and signal attenuation in each branch. The aim of this thesis is to create the VHDL design of selected fading channel simulator and its description for hardware implementation into the FPGA.
|
|
Využitelnost technické akciové analýzy při investičním rozhodování v ČR
Štanga, Miloš ; Musílek, Petr (advisor) ; Veselá, Jitka (referee)
Technická analýza má dlhú históriu. Jej opodstatnenosť sa vyvíja tak v čase, ako aj v priestore. Práca simuluje použitie niektorých indikátorov technickej analýzy (kĺzavé priemery, momentum, RSI, AD-line) na českom akciovom trhu a čiastočne na ňom skúma kalendárne vplyvy. Vypovedá o tom, že technická akciová analýza v ČR nie je nadpriemerne zisková. Znamená to, že český akciový trh je minimálne slabo efektívny.
|
|
CSR activities of the chosen brand
Marečková, Barbora ; Plášková, Alena (advisor) ; Mihališinová, Varéria (referee)
The diploma thesis is focused on the CSR (Corporate Social Responsibility) activities and evaluates the CSV (Creating Shared Value) activities of the brand producing Slovak cheese and cheese specialties. The aim is to analyse and evaluate them properly, propose the right communication and future goals, that are in line with the current ones. The first part is centred on the description of CSR concept, its establishment, history in the world and in the Czech Republic. The concept of CSV is described next. This is followed by the trends in the communication of CSR on social media and other on-line media. The second part is mostly about the particular brand, its history and main attributes. Already existing activities are analysed, their communication is proposed together with the activities, that should supplement the contemporary ones in the future.
|
guest ::
