|
|
Apartment house
Naďo, Jozef ; Polášek, Josef (referee) ; Matějka, Libor (advisor)
The subject of the bachelor thesis is the elaboration of project documentation for the construction of an apartment building. It is an object with four above-ground floors and one underground floor. There are 9 flats on the above-ground floors, garages and storage facilities with technical equipment of the building are located in the underground floor. Garages are designed as a separate parking space, a total of 8. Each floor has a balcony (or terrace), which gradually with the floors recedes into the area of apartments. The roof above the 4th floor is designed as a single-layer flat. The building is designed from the YTONG system both perimeter walls and ceiling structures
|
|
|
Load-bearing reinforced concrete structure of a multi-storey residential building
Badány, Kristián ; Laníková, Ivana (referee) ; Šimůnek, Petr (advisor)
The objective of the diploma thesis is a design and check of load-bearing concrete structure of multi-storey residential building. The building is located in Brno. The total ground plan’s dimensions are 39,32 x 22,58 metres, total height of the building in the highest point is 10,29 metres. The object is three-storey building with rectangular plan with partial basement designed as cast-in-place concrete frame and two above-ground floor designed as reinforced concrete walls and masonry walls. Load-bearing floor structures are designed as reinforced concrete slabs. Drawing documentation is included.
|
|
|
Effective evaluation of losses to buildings affected by flood
Tuscher, Martin ; Schneiderová-Heralová,, Renáta (referee) ; Kocanda,, Pavel (referee) ; Zeleňáková,, Martina (referee) ; Hanák, Tomáš (advisor)
This doctoral thesis deals with the valuation of damage to buildings affected by floods. In its individual parts, it researches floods as a risk, focuses on the damage caused by this natural phenomenon and examines the methods used to assess the damages caused by floods. With the beginnings of human settlement, the vicinity of rivers has been inhabited for the many befits that watercourses bring. However, there are many dangers associated with this, especially the ones associated with the spillage of riverbeds – with floods. This phenomenon causes considerable damage to property, the environment or human health and lives. There are many measures to eliminate the risk of flooding, or at least mitigate its effects. This work further researches the mitigating of impacts – it examines the methods of determining the amount of damage to buildings caused by floods, looks for factors and parameters influencing the amount of damage and focuses on streamlining these methods. The aim of the thesis is to find a suitable methodology/model that can automate the calculation of the amount of damage, or in other words, to find a quick and at the same time sufficiently accurate solution to this problem. The main output of the thesis is the equation of the damage curve and a model for the amount of damage calculation based on the principle of damage curves using the hybrid genetic algorithm. Another output is a practical tool that works on the basis of the said algorithm and automatically calculates the amount of damage to the building when entering very basic information about the damaged object.
|
|
|
Construction technology study stage of realization vegetation roof of residential house Avidol in Bratislava
Huková, Martina ; Nečasová, Barbora (referee) ; Diaz, Yvetta (advisor)
The bachelor thesis solves the building technology solution of the vegetation roof, which creates a green atrium and a relaxation zone in the residential complex Avidol in Bratislava. The subject of the bachelor thesis is the realization of a flat vegetation roof. The work includes a engineering report, budget, bill of quantities, time schedule, technical prescription, machine design, check and test plan, and other attachments by input..
|
|
|
The Steel Structure of a Residential Building
Špeta, Václav ; Barnat, Jan (referee) ; Štrba, Michal (advisor)
The master's thesis deals with a project of the steel structure of a residential building. The building is thought like sevenfloor balcony-access house. The access balcony is situated in atrium in the middle of the building, which is roofed with a shell dome. The regular hexagon creates a ground plan of each floor. Every floor is turned 30 degrees compared to the next floors. The longest cross dimension is 43 m (axial). The height of the building is 30,4 m (including copula envelope). The final structure is chosen on the basis of optimization of the structural variants. The climatic load angle structure falls into the locality of the town Brno. The vertical supporting structure is made from steel-concrete accoupled circular section columns. The floor structure is designed from the steel rolled section I and H. These support assembly of a horizontal structure. Some joists and girder are designed like accoupled with a concrete floor slab. The copula above atrium is made from glue laminated timber ribs. Infill rods are from steel tube. The top ring of copula is designed from the rolled section UPE.
|
|
|
Residential Building - Lesná
Řeháková, Karolína ; Drobníček, Ladislav (referee) ; Menšíková, Naděžda (advisor) ; Krupicová, Jana (advisor)
The residential building is located in Brno,local part Lesná. The building is designed on a corner place between the streets Dřínová and Tomečkova. The proposal consists of two buildings. Their height arrangement is designed so as to cast a shadow each other or the surrounding buildings. North object exceeds the southern. Mass is based on the efforts to achieve the greatest sunlit room. It is also designed so as to obtain the greatest intimacy on balconies. Balconies also highlight the horizontal breakdown of volume. Residential complex contains thirty different flats floor space and type. The flats are arranged on the axis of north - south, with all habitable rooms are located to the south. In this solution, care was taken and the sunscreening system. It is an outdoor blinds, whose appearance gives the shape of a house. When the proposal was based on the objective of linking objects with the nature of what was to maximize greening space. This helps the inner block, which is used for rest and relaxation. There is also a small cafe designed with outdoor seating. At the same time the grass roof of the smaller objects, when viewed from the upper floors blend into their environment.
|
|
|
Apartment building
Hradilová, Tereza ; Žajdlík, Tomáš (referee) ; Čuprová, Danuše (advisor)
Subject of the bachelor thesis is detail design documentation of an apartment building. Proposed apartment building is located in the Zlín region in the foothills of the Hostýn Hills in the outskirts of the village Chomýž. Building is located on the cadastral number 3240 and 3238/1 in the cadastral area of Chomýž. The apartment building contains 6 apartments. In the basement are designed cellar cubicles, warehouses, drying room, utility room and room for house maintenance. On the first floor there are two apartments, a cleaning room and a pram room. There are only apartments on the second and third floor. Residential building is designed as a basement, three-storey, the last floor is a residential attic. The building will have a gabled roof with a slope of 35 ° and with dormer windows. The structural system of a residential building is a combination of longitudinal and transverse. The foundations are made of concrete foundation strips. The perimeter load-bearing masonry is in the basement of concrete blocks of permanent shuttering, in the above-ground floors of ceramic blocks, as well as the vertical support system inside the building. The ceiling structure on all floors consists of a composite ceramic-concrete ceiling made of POT beams and MIAKO inserts. The staircase is designed as monolithic reinforced concrete. Thermal insulation of apartment building is designed as polystyrene.
|
|
| |
|
|
Reduction in House Prices due to Humidity
Ocásek, Petr ; Šmahel, Milan (referee) ; Weigel, Lubomír (advisor)
Diploma work "Problems of house price reduction due to defects manifested with damp" deals with the issue of property valuation and subsequent sale of the defect. The first chapter describes valuation and other important factors relating to the Act valuation. The second chapter deals with the necessary documentation for property valuation and basic terminology. The third section deals with defects that could occur in the residential building as well as their possible correction. Another part of this work is focused on the actual valuation of the object to a defect with property damage and the last chapter deals with the actual real estate market and the subsequent sale of such property with the defect. The attachments of the case study is then focused on the valuation of the house and without defects and possible solutions and proposed procedures for sale.
|
|
|
Apartment building
Pavlíček, Jiří ; Dohnal, Jakub (referee) ; Pěnčík, Jan (advisor)
The subject of this bachelor thesis is the elaboration of project documentation for the construction of an apartment building. It is a detached basement building, which is located on a rectangular plot with flat terrain. The building is designed with four floors and one underground floor. This new building is equipped with a lift for 8 people. In the underground floor there is a technical background of the building and a storage cellars for individual apartments. There are 12 flats with different disposition and size of floor areas. The load-bearing structural system is diagonal. The lower structure is made of a waterproof concrete, the so-called "white tub" which consists of a reinforced concrete foundation slab and reinforced concrete basement walls. The upper structure is built of Porotherm system, which is insulated with ETICS facade contact system with basalt wool insulation boards. Ceiling structures are designed as monolithic reinforced concrete slabs and the staircase is built as a reinforced concrete monolithic three-armed. The façade is shaped according to the partially opened loggias. The last floor recedes from the face of the building and creates spacious terraces. Holes are filled with wooden windows. The roofing of the apartment building is solved by a single-layer flat roof with a classical layer arrangement and a hydro isolation layer made of asphalt strips.
|
guest ::
