|
|
Autocentrum VW-Group
Fuchs, Ondřej ; Marek, Jiří (referee) ; Šindlar, Jiljí (advisor) ; Kalousek, Lubor (advisor)
The bachelor thesis deals with the new building of Car centre VW GROUP in Brno. District Brno-Brněnské Ivanovice Kastanova street. B.p.n 50/1, 51/1, 52, 53, 54, 55/1, 55/2, 55/3, 55/4. In cadastral area it is led as Brownfields under number 0201 by the city of Brno. It has a triangular shape with an area of 1.3 hectares and master plan is for blended areas. It is located on the Kastanova street and it is currently accessible from this street. From the eastern side it is bordered by a protective zone of river Svratka. The surrounding area is built up with administrative, industrial and commercial buildings. The building is situated in the north part of the area. It is designed as single building divided to one floor carservice and showroom with two floors. Presentation, sales, after-warranty and postwarranty servicing cars Volkswagen.
|
|
|
Detached House with car repair service in Humpolec
Melenovský, Jan ; Mizerová, Lenka (referee) ; Smolka, Radim (advisor)
The thesis deals with a detached house with a car repair service. It´s lately erected building of detached house with flat roof structure situated in Humpolec, Větrná Street. The building is designed as a three-storeyed detached house with basement for four people. Parking place for two cars and structure of outdoor wooden terrace on the first floor is included to the property. The detached house is followed by the establishment of the car repair service. It´s determinated for mechanical repairing cars. There is another parking place for four cars located near the car repair service. The building plan uses load-bearing vertical structure of ceramic system Porotherm, horizontal structure consists of prestressed and reinforced concrete panels Spiroll board.
|
|
|
Car service
Diatel, Bohumil ; Kozubíková, Ivana (referee) ; Matějka, Libor (advisor)
The subject of this diploma thesis is a layout of car service object in Brno – Horní Heršpice, Železná street. The building is designed as four-floor with flat - cascaded roof, which will be partially used also like a terrace. The object is intended for repairs and servicing of the trucks and buses. Inside the building are situated also offices, training room and temporary accommodation for the drivers. Supporting structure of the building is composed by ferroconcrete prefabricated shell, which horizontal supporting structure is composed by ferroconcrete pre-stressed panels spiroll. The curtain enclosure wall is designed from Sendwix system line-sand bricks with the outer thermal insulation. A building plot is flat. A part of the layout is also thermal and technical, acoustic and fire safety assessment. This diploma thesis contain also five specializations – layout of ferronconrete pre-stressed girder, layout of steel shelter, layout of construction basing, scheme of the overall heat output of the building and sewerage layout.
|
|
|
Proposal of a Company Expansion by a Fuel and Oil Station
Holcmanová, Eva ; Ing.Jaroslav Vala (referee) ; Mikulec, Luděk (advisor)
The aim of this diploma thesis is to draw up a business plan regarding an extension of an existing car repair service by adding a public fuel filling station to it. The public fuel filling station will be built directly within the area of the existing car repair service located in the village of Jemnice, in the district of Žďár nad Sázavou. The theoretical part generally describes the business activity, possible forms of business and individual analyses used in this diploma thesis. The second part briefly describes the chosen company, for which the above mentioned draft of the businnes plan is intended. The last part of the diploma thesis presents the actual construction plan of the public fuel filling station based on the elaborated analyses, including the time schedule of the execution.
|
|
|
Proposal for a new car service station
Bejda, Vojtěch ; Neužil, Karel (referee) ; Kubík, Roman (advisor)
The aim of the diploma thesis is to create a proposal of a new car service station in a new lokality with regard to acquired experiences of the company. The first part of this work analyzes the current state in the company and current condition of a workshop. Together with that, it contains an economic research and put forward a strategy for the service station construction. The next, technical part, consists of the service station proposal with regard to outcomesin preceeding parts. Last part suggests an ekonomice valuation of the project.
|
|
|
Car Showroom, Holešov
Olšáková, Klára ; Kolářová, Eva (referee) ; Kolář, Radim (advisor)
The task of the master's thesis is to elaborate a project documentation for construction works for new car showroom in Holešov. The new building is located in the cadastral territory of Všetuly. The building is designed as a two-story, detached, set on a flat plot of land. The first floor can be divided into a car showroom, technical and hygienic facilities for employees and customers, and into a car service. On the second floor, there are offices, a meeting room, an archive and hygienic facilities. The entrance to the building is oriented from the north side of the building. The car showroom is based on a foundation of pre-fabricated cup footings connected by means of pre-fabricated reinforced concrete foundation sills. The supporting system of the building consists of a prefabricated reinforced concrete skeleton. Ceramic masonry are used as infill masonry. The ceiling structures are designed as pre-stressed reinforced concrete panels. A single-arm prefabricated reinforced concrete staircase with the mezzanine connects the individual floors, which is located inside the building. The roof of the building is designed as a flat vegetation extensive roof. The building is insulated with boards made of glass mineral wool and sheathed using a ventilated facade system with cladding made of bond boards.
|
|
|
Car Fault Diagnostics
Potocký, Matej ; Klusáček, Stanislav (referee) ; Šedivá, Soňa (advisor)
This diploma work is targeting fault diagnostics of electronic systems and engines used in automobiles. Results and methods used to diagnose faults are analyzed within the work, using standard diagnostic methods and devices, results of which were captured measuring with multi-channel oscilloscope. Furthermore, suggestions of using methods optimized for cost and time difficulty factors are made.
|
|
|
Autosalon
Bajer, Radim ; Manová, Ludmila (referee) ; Maceková, Věra (advisor)
This master thesis is focused on elaboration of project documentation for constructing autosalon in Žďár nad Sázavou. Project and appendix are processed by current applicable laws, regulations and standarts. Designed object is situated on plat #6167/2. Both plat sis parts of cadastral area of Žďár nad Sázavou. There are all needed engineering netwoeks nearby. Object is divided on two functional parts, which are operationally and constructionally connected. First part is exhibition and representatice hall, which are capacity of 7 exhibited vehicles. Other partis formed by administrative facilities for staff including sanitary facilities for both staff and visitors. Second part is service for personal and light commercial vehicles with four working stations. Construction is designed reinforced concrete columnar structural system. Plan dimension autosalon is 31,06x22,6m. Plan dimension autoservise is 30,74x18,84m. The cladding autosalon is designed of ceramic tile 250mm. The cladding autoservis is designed of sandwich panel. Roof of building accross the surface is flat roof. Establishment of the object is a combination of footings and foundation belts. Cladding of exhibition hal lis more than 50% glazed. Parts of autosalon and autoservise are designed as sigle storey objects, while administrative part is designed as a two.
|
|
|
Autosalon
Balúch, Tomáš ; Pospíšil, Jaroslav (referee) ; Pěnčík, Jan (advisor)
This master's thesis focuses on design and elaboration of documentation for construction of a Car Showroom. The building is divided to two functional parts. The building is to be situated on plot number 1333/21, cadastre unit: Bohunice. The building is to be located on an undeveloped plot in possesion of the investor. The parking lots are connected to a local road. All substantial infrastructures are located nearby the plot. The proposition and the design of the building have respect for both commune plan and current buildings. The documentation is elaborated with regard to the contemporary Czech legislative and standards. The project designs the building, which is divided in two functional parts: SO 01 & SO 02, both operationally and visually connected. Contructions of objects are structurally independent. The first object includes exhibition hall with capacity of 8 exhibited cars. There is also to be located the administrative part, waiting rooms for customers, facilities for employees and the warehouse. The second object includes car repair shop. There are also to be located facilities for employees of the service, workshop, room for a car handover, hand car wash and an utility room. Construction is designed as a reinforced concrete columnar structural system with prefabricated single footings, self-supporting foundation slab and reinforced concrete ceiling slab with integrated girders above first floor of the object SO 01. The roofs of the building are designed as a flat roofs and the support constructions are made of steel. Planned dimensions of autosalon are 41x18 metres. As a cladding of the first object is used the lightweight glass cladding. For masonry walls are used the 250 mm thick ceramic blocks, mineral insulation and ventilated external facade cladding with use of fiber-cement boards. Planned dimensions of car repair shop are 31x28 metres. As a cladding of the second object are used the sandwich panels with foam core made of PIR.
|
|
|
Motorshow
Bár, Radek ; Vémola, Josef (referee) ; Utíkalová, Ivana (advisor)
This master thesis is focused on elaboration of project documentation for constructing autosalon in Kopřivnice. Project and appendix are processed by current applicable laws, regulations and standarts. Designed object is situated on plat #419/2 and partly on plat #419/27. Both plats are parts of cadastral area of Kopřivnice. There are all needed engineering networks nearby. Object is divided on three functional parts, which are operationally and constructionally connected. First part is exhibition and representative hall, with capacity of 11 exhibited vehicles. Second part is formed by administrative facilities for staff including sanitary facilities for both staff and visitors. Third part is service for personal and light commercial vehicles with three working stations. Construction is designed partially reinforced concrete columnar structural system and partially of brick longitudinal structural system. The biggest plan dimension of building is 34.3x35.15m. The cladding is designed of sandwich blocks LIVETHERM tl.400mm. Roof of building accross the surface is flat roof with several height levels. Establishment of the object is a combination of footings and foundation belts. Cladding of exhibition hall is more than 50% glazed. Parts of service and autosalon are designed as sigle storey objects, while administrative part is designed as a two.
|
guest ::
