|
The nursing process in a child patient with portal hypertension
Zemanová, Lenka ; Voleníková, Ivana (advisor) ; Mitrová, Katarína (referee)
My work called "Nursing process at a child suffered from portal hypertension" have been devided into two basic parts. The first part is theoretical, the second one is practical. In the first half of my work I deal with anatomy and physiology of liver, gallbladder and gallbladder ways. In the second part I mention characteristics of the disease, a clinical picture of portal hypertension, a general assessement leading to diagnosis of this disease. In the first part I have mentioned basic information about the disease, course of hospitalization, investigative methods and therapy survey. In the practical part I use the investigative process model, which goes out from the "Functional health" by Majora Gordon. Thanks to gained infromation from the medical documentation, from the patient, patient's mother and other medical stuff I analyzed all problems and set out actual and potential nursing diagnosis before and after the surgical intervention. I describe realization and evaluation of nursing interventions. In the end of my work I delt with the patient's education and also with patient's mother'education. The aim of the education was to advice and to adhere to medical and nursing instructions, to hand over sufficient of information about consequences and answering all questions, that have been in my competence....
|
|
Modelling, parameter estimation, optimisation and control of transport and reaction processes in bioreactors.
ŠTUMBAUER, Václav
With the significant potential of microalgae as a major biofuel source of the future, a considerable scientific attention is attracted towards the field of biotechnology and bioprocess engineering. Nevertheless the current photobioreactor (PBR) design methods are still too empirical. With this work I would like to promote the idea of designing a production system, such as a PBR, completely \emph{in silico}, thus allowing for the in silico optimization and optimal control determination. The thesis deals with the PBR modeling and simulation. It addresses two crucial issues in the current state-of-the-art PBR modeling. The first issue relevant to the deficiency of the currently available models - the incorrect or insufficient treatment of either the transport process modeling, the reaction modeling or the coupling between these two models. A correct treatment of both the transport and the reaction phenomena is proposed in the thesis - in the form of a unified modeling framework consisting of three interconnected parts - (i) the state system, (ii) the fluid-dynamic model and (iii) optimal control determination. The proposed model structure allows prediction of the PBR performance with respect to the modelled PBR size, geometry, operating conditions or a particular microalgae strain. The proposed unified modeling approach is applied to the case of the Couette-Taylor photobioreactor (CTBR) where it is used for the optimal control solution. The PBR represents a complex multiscale problem and especially in the case of the production scale systems, the associated computational costs are paramount. This is the second crucial issue addressed in the thesis. With respect to the computational complexity, the fluid dynamics simulation is the most costly part of the PBR simulation. To model the fluid flow with the classical CFD (Computational Fluid Dynamics) methods inside a production scale PBR leads to an enormous grid size. This usually requires a parallel implementation of the solver but in the parallelization of the classical methods lies another relevant issue - that of the amount of data the individual nodes must interchange with each other. The thesis addresses the performance relevant issues by proposing and evaluation alternative approaches to the fluid flow simulation. These approaches are more suitable to the parallel implementation than the classical methods because of their rather local character in comparison to the classical methods - namely the Lattice Boltzmann Method (LBM) for fluid flow, which is the primary focus of the thesis in this regard and alternatively also the discrete random walk based method (DRW). As the outcome of the thesis I have developed and validated a new Lagrangian general modeling approach to the transport and reaction processes in PBR - a framework based on the Lattice Boltzmann method (LBM) and the model of the Photosynthetic Factory (PSF) that models correctly the transport and reaction processes and their coupling. Further I have implemented a software prototype based on the proposed modeling approach and validated this prototype on the case of the Coutte-Taylor PBR. I have also demonstrated that the modeling approach has a significant potential from the computational costs point of view by implementing and validating the software prototype on the parallel architecture of CUDA (Compute Unified Device Architecture). The current parallel implementation is approximately 20 times faster than the unparallized one and decreases thus significantly the iteration cycle of the PBR design process.
|
|
Association of Idependent Theatres of the Czech Republic – Analysis and Description of the Current State
Bodoríková, Markéta ; KAŠPAR, David (advisor) ; PROKOP, Petr (referee)
The thesis is focused on newly established Association of Independent Theaters of the Czech Republic, officially using the abbreviation AND ČR. The aim of the thesis is to describe formation of the association, its current state, future plans and its functioning. The first part examines the term “independent professional theater” and briefly characterizes selected organizations from the Czech Republic and Europe with the potential to meet with the AND ČR in the cultural area in future. In the following parts were researched needs of independent professional scene in Prague and was described the needs analysis for the field of “independent” theater from the year 2013. The thesis describes the development of AND ČR, its activities up to current stage, organizational structure and future short-term plans. In the final part of the thesis, there is defined the management system of the association and established its possible improvements so the AND ČR would become the leading organization representing independent professional theaters in the Czech Republic.
|
|
Interpretive principles in Verdi's operas
Beneš, Andrej ; HAJÓSSYOVÁ, Magdaléna (advisor) ; VOTAVOVÁ, Yvona (referee)
The master’s thesis deals with the theme creation of the opera production of Giuseppe Verdi with the focus on his opera Falstaff and deals with significant important interpretations of this opera. This dissertation is supposed to bring a complete picture of Verdi’s opera production pointing out some details which are not commonly known nor from the public nor in the professional music world. What appears in this work is Verdi’s correspondence (letters). I consider these letters an authentic source to understand Verdi’s creative and artistic intentions. Hereafter I portray an idea of how to perceive opera Falstaff not only from my point of view but I used the lead from the Italian reviews and musicology.
|
|
FAUST AND JOB´S
Slezáková, Kateřina ; ULLRICHOVÁ, Daria (advisor) ; SÍLOVÁ, Zuzana (referee)
This thesis examins the nature of Faust’s inner ambivalence in the context of modern times. It tries to identify the basic traits leading to the feeling of emptiness. The authoress uses comparing the dramatic character of Faust with his biblical prototype of Job and one of the most successful entrepreneurs today Steve Jobs. Based on the comparison she contemplates the validity or mutation of the drawing theses nowadays. In the second part the authoress reflects the production of the project of Faust. Due to her specialization in the field of dramaturgy she pursues especially the process of the selection of particular dramatic situations, adjustments of dramatic text and the choice of suitable staging means.
|
|
Fluidized-bed Combustion of Dry Stabilized Sewage Sludge in Oxy-fuel Mode
Moško, Jaroslav ; Pohořelý, Michael ; Durda, Tomáš ; Zach, Boleslav ; Šyc, Michal ; Svoboda, Karel
Sewage sludge is an inevitable waste stream from wastewater treatment and its disposal is complicated due to specific characteristics of its composition. Sewage sludge combustion/incineration is the only suitable way for disposal of large volumes of sewage sludge containing POPs and some heavy metals. Sewage sludge combustion reduces the volume of such waste and causes destruction of organic contaminants. Oxy-fuel combustion is a technology for simplifying CO2 sequestration from the flue gas by using nearly pure oxygen instead of air for the combustion. In order to control the combustion temperature, part of the flue gas is recycled to combustion chamber. The paper brings information about investigation of the effects of combustion temperature and concentration of oxygen in inlet combustion media on the emissions of NOx, N2O and SO2 in FB combustion of sewage sludge. The experimental results have shown that an increase in combustion temperature leads to an increase in NOx and to a decrease in N2O emissions in the temperature range 750–930 °C. The lowest SO2 emissions were measured in the temperature interval from 800 to 820 °C in all experiments with different oxygen concentration in inlet gas. It was found that when the oxygen concentration in inlet gas increased, the emissions of SO2 increased while emissions of NOx slightly decreased.
Fulltext: content.csg -  PDF
Plný tet: SKMBT_C22016112214480 - PDF
|
|
Managerial skills
Červinková, Barbora ; Kříž, Josef (advisor) ; Zdeněk, Zdeněk (referee)
The theoretical basis of this thesis explains the terms closely associated with the management and managerial skills. Introductory part relates to approach the concept itself and the executive management, we are further broken down managerial functions, which are continuously illuminates to describe other skills, such as communication, goal setting, skills and coaching. The main point is to approach the concepts of soft and hard skills that managers should possess, or which should in the course of his practice to learn. Only by careful control of both of these groups of skills can lead to good organization. For a clearer explanation of the managerial skills included graphic view, which approximates the distribution of skills. In the second part, a practical part, described the situation with the existing skills of managers in the selected company. Thanks to the questionnaire, it is possible to measure the current level of acquired skills of managers at three levels and can be evaluated, what is the interest of improving individual skills, or whether managers feel sufficiently qualified for their job positions.
|
|
Freezing technology of bull sperm in relation to its survivability and fertilization ability
Doležalová, Martina ; Stádník, Luděk (advisor) ; Jiří, Jiří (referee)
The aim of optimalization the insemination doses production is to provide the highest fertilization ability of spermatozoa during the demanding proces of processing fresh semen and its subsequent cryopreservation. Temperature changes causes spermatozoa damage during the cooling and freezing. Spermatozoa is exposed to cold shock and many others limiting factors, which leads to cell death and therefore to decline of fertilization ability of thawed insemination doses. For increasing spermatozoa resistance, exactly the plasma membrane resistance against cold shock was fraction of egg yolk LDL cholesterol (low density lipoprotein) at various concentrations into the comercially produced diluents added. It is believed that LDL acts possitively to plasma membrane and helps to maintain the fertilization ability of spermatozoa after thawing. Following step in the proces of insemination doses production is slow cooling of diluted semen and equilibration, when the straws are store at cooling box for 30 minutes to 240 hours. This period is necessary to penetrate of certain diluent components into the spermatazoa also maintain the balance between their intracellular and extracellular concentration. Also important is subsequent freezing temperature gradient of insemination doses. The most suitable freezing method is based on computer controlled temperature decline in freezing chamber which allows the precise control of ice crystals formation that could tear and kill the cell.
During 2012 to 2016 was repeatedly collected semen from the group of breeding bulls (n = 27, Holstein and Czech Fleckvieh breed) at AI centre. Semen which fulfill the standard entrance conditions in first step was evenly into several parts divided. For dilution the three types of comercially diluents AndroMed, Bioxcell and Triladyl with and without LDL addition were used. Into the diluents AndroMed and Bioxcell the concentration of LDL 4 %, 6 % and 8% into the dilent Triladyl 6 %, 8 % and 10 % was added. Diluted semen was filled into the glass capillares with volume 0,1 ml and temperature +4 °C. Subsequently the sample was placed to cold bath (0°C) for 10 minutes. Then the volume of capillare with physiological solution (37 °C) was mixed and for next 120 minutes was incubate. The effect of cold shock to proportion of live spermatozoa was evaluated by using Eosin and Nigrosine staining technique during heat test of spermatozoa survivability after spermatozoa heating and after 120 minutes of incubation.
The more suitable semen diluents which provide the higher spermatozoa resistance against cold shock were AndroMed and Bioxcell. Together the possitive effect of LDL addition into the diluents to lower decrease of proportion of live spermatozoa during heat test was found (P<0.05). The most suitable LDL concentration which had a favorable influence at spermatozoa resistance against cold shock was 6 % in diluent Bioxcell. Values of the proportion of live sperm were higher at the beginning of the heat test (+1.31% to + 3.2%) and after 120 minute incubation (+5.82% to +8.41%) compared to other diluents with and without addition of LDL.
In the next step the process of equilibration was optimized, is an important part of insemination doses production. The effect of the length of equilibration for subsequent fertilization ability of spermatozoa was evaluated using spermatozoa motility based of CASA and proportion of live spermatozoa after thawing and during heat survival test lasting 120 minutes (37 ° C). Suitable semen was diluted by comercially used diluent AndroMed based on soya lecithin, filled into the straws (0.25 ml), cooled and equilibrated in cooling box for 30, 120 and 240 minutes and freezed in programmable freezing box applying four types of freezing curves differing in temperature rate decline. There was used standard and by producer recommended 3. phase freezing curve, then 2. phase freezing curve, and 3. phase freezing curve with slower as well as rapid decline of temperature rate in freezing chamber, compared with standard freezing curve. The highest spermatozoa motility was found using 240 minutes of equilibration by +2.72% and +4.58% compared to other lengths of equilibration (P <0.05 to 0.01). The highest proportion of live spermatozoa was found using 120 minutes of equilibration (+6.87 % and +8.68 %). The highest average spermatozoa motility during heat test after thawing was achieved by using 2. phase freezing curve (from +2.97% to +10.37%, P <0.05), also in the proportion of live spermatozoa (from + 4.37% to +8.82%, P <0.01). When evaluating interaction between the length of equilibration and freezing curve (standard 3. phase and 2 . phase freezing curve), the highest average spermatozoa motility and proportion of live spermatozoa using 240 minutes of equilibration by both freezing curves was reached, there was no statistically significant differences. As well as, in all evaluated parts of this study the individual differences between ejaculate of bulls and within semen from one bull (P <0.05) as secondary effect were found.
To maintain good fertilization ability of semen during cryopreservation is necessary to increase the spermatozoa resistance against cold shock using addition of correct concentration of LDL into the commercially used diluents AndroMed and Bioxcell. Subsequently the fertilization ability of insemination dose is influenced by cooling, the length of equilibration and freezing. The length of equilibration 120 minutes and more as well as gentle way of freezing according to freezing curve, which ensures a gradual decrease of temperature in freezing chamber provided the higher average spermatozoa motility and proportion of live spermatozoa.
|
|
Antioxidant, anti-proliferative and immunomodulatory effect of fruits, vegetables and mushrooms in vitro
Doskočil, Ivo ; Havlík, Jaroslav (advisor) ; Orsák, Matyáš (referee)
Recently there has been an increasing interest in discovering of new species of plants and mushrooms which have antioxidant or anti proliferative activity. The interest is caused by the fact that these species have medicinal and food utilization. These properties of plants and mushrooms can be used when dealing with many diseases which may be connected with oxidative stress (inflammatory bowel disease, cardiovascular disease, hypertension, and tumour disease, etc.).
The thesis propounds characteristics of in vitro antioxidant and anti proliferative activity of 19 types of juices and 28 methanol extracts of fruits and vegetables, which are common parts of a diet. In the thesis there are also characteristics of 13 ethanol extracts of edible mushrooms of the order of Polypore (Popyporales). Antioxidant activity was quantifie by 2, 2 diphenyl 1 picrylhydrazyl (DPPH), oxygen radical absorbance capacity (ORAC), and inhibition of nitric oxide (NO) production. Cytotoxicity was measured by MTT (3 (4,5 dimethylthiazol 2 yl) 2,5 diphenyltetrazolium bromide. Immunomodulatory activity was determined by an assay of phagocytic activity of human neutrophil granulocytes. Further a total phenolic content (TPC) and total beta glucan content were investigated; these are considered to be the potentially active constituents participating in mentioned activities.
From the obtained results it is evident that juices (TPC = 1603.2 mg GAE/L; ORAC = 438.5 umol TE/g)
and a bilberry (Vaccinium myrtillus) fruit extract (ORAC 836.6 umol TE/g; DPPH = 404.6 umol TE/g) showed
the highest antioxidant activity of all tested samples of fruits and vegetables. Capsicum (Capsicum L.)
juices (TPC = 642.1 mg GAE/L; ORAC = 127.9 umol TE/g) and a radish (Raphanus sativus L.) extract
(ORAC 724.5 umol TE/g; DPPH = 52.2 umol TE/g) also proved to have the high values of antioxidant activity. From the tested fruits and vegetables the following inhibited to produce a nitric oxide: onion (Allium cepa L) juices (lowered the NO production by 57%), tangerine juices (Citrus reticulata Blanco)(by 52%), broccoli (Brassica oleracea var. botrytis italic) extract (by 21%), and orange (Citrus sinensis Pers.) extract (by 10%). Concerning edible
mushrooms, Lentinus tigrinus (Bull.) Fr. (TPC = 216.2 umol GAE/g of extract), Ganoderma lucidum (Curtis) P. Kras (TPC = 257.9 umol GAE/g of extract), and Royoporus badius (Pers.) A.B. De (TPC = 257.8 umol GAE/g of extract) presented the highest phenolic content. Sparassis crispa (Wulfen) Fr. (117.4 mg/g of extract) had the highest content of beta glucan. Substantial effect on phagocytic activity of granulocytes was noticed in connection with Neolentinus lepideus (Fr.) Redhead & Ginns, Polyporus squamosus (Huds.) Fr., and S. crispa. In connection with the latter of mentioned mushrooms, a moderate inhibitory effect towards HT 29 human colorectal adenocarcinoma cell line
(IC50 = 107 ug/ml of extract) was noticed.
The results indicate that the tested plants and mushrooms can be beneficial when reducing the negative effects of oxidative stress. The oxidative stress has been recognized as a contributing factor to a whole range of diseases and the reduction of the oxidative stress may lead to the decrease in the possibility of the diseases´ progression. The results show the possible favourable effects on the human health. When evaluating the results, the following fact should be taken into consideration; the in vitro tests and screenings are considered to be the first phase of systematic research of the effects and serve for the choice of respondents for further detailed studies.
|
|
Subspace Modeling of Prosodic Features for Speaker Verification
Kockmann, Marcel ; Kenny, Patrick (referee) ; Nöth, Elmar (referee) ; Černocký, Jan (advisor)
Předložená disertační práce se zabývá ověřováním mluvčího pomocí prozodických příznaků zahrnujících hodnoty základního tónu, energie a délek řečových úseků. Studovali jsme dvě rozdílné techniky pro parametrizaci: první vede k dobře definované sadě menšího počtu příznaků, druhá k vysoko-dimenzionální sadě heterogenních prozodických příznaků. První část práce se věnuje vývoji příznaků reprezentujících prozodické kontury, zde jsme vyvinuli a ověřili několik modelovacích technik, s důrazem na modelování v reprezentativních podprostorech. Druhá část práce se zaměřuje na nové pod-prostorové modelovací techniky pro heterogenní prozodické parametry s velkou dimenzionalitou. Model je teoreticky odvozen a experimentálně ověřen na oficiálních datech z NIST evaluací ověřování mluvčího (NIST Speaker Recognition Evaluation). Ve srovnání s ostatními současnými prozodickými jsme dosáhli podstatně lepších výsledků. Na konci práce presentujeme také novou techniku pro elegantní kombinaci dvou prozodických systémů. Tato technika může být použita rovněž pro fúzi prozodického systému se standardním přesným cepstrálním systémem, což vede k dalšímu podstatnému zvýšení úspěšnosti verifikace.
|
guest ::
