| |
|
Is import of goods from european countries to Czech republic more or less influenced by changes in nominal and real exchange rates than in non european countries?
Vereš, Jan ; Stroukal, Dominik (advisor) ; Slaný, Martin (referee)
This bachelor thesis analyses the connection between import of goods from foreign countries to Czech Republic and the exchange rate changes. The initial hypothesis of this paper is to prove that the depreciation of domestic currency has positive influence on balance of trade balance. For this purpose there is eight econometric models which were created by using time series from years 2003 to 2016. These models are divided in pairs among four chosen countries. For each country two models were created that follow the development of trade balance between Czech Republic and one of the countries in two different time frames. All the models always use the real effective exchange rate, growth rate of GDP for Czech Republic and growth rate of GDP for one of the countries as explanatory variable. It is connected with the second task of this thesis, which is the analysis of the differences in the behaviour of the models that belong to the countries which are members of the EU and these that are not. The aim is to find out whether the existence of tariffs on imported goods from countries out of the EU causes visible differences in the behaviour of the variables that were included in the models. Based on the outcomes of all eight models the main hypothesis has been proved right for three out of four countries. In the models for Germany, China and France the relation of real exchange rate and trade balance came out as positive in long term, in short term the outcome was ambiguous. The second question of this thesis has been answered, but its added value is questionable. The final models for each state do show some noticeable differences and they can be used to determine if the influence of the change of exchange rates on trade balance is smaller or bigger in the countries where tariffs are used. On the other hand, from the results we can learn that the sample of only four countries is insufficient for the deduction of any conclusions.
|
|
A Comparison of Two Models of the Energy Market Development in Czech Republic from 2015 to 2040
Dvořáková, Jitka ; Zeman, Martin (advisor) ; Lukášová, Tereza (referee)
The bachelor thesis is focused on the prediction of the energy market in the Czech Republic between 2015 and 2040 and on the comparison of potential costs related to two models of energy portfolio management. The first model was created according to the National Energy Concept from 2014, while the other one was designed artificially to simulate usage of the renewable resources in 50% of the electric energy production. The theoretical part of the thesis discusses the recent situation of the Czech energy market, defines types of energy resources and explains terms related to the discussed topic. In the practical part, direct production costs of different kinds of power plants were computed and used to estimate economic demands of the two considered models. The efficiency of both models was compared and evaluated. The aim of the thesis was to decide, which of the two models would be more favourable for the Czech national economy. Key words: energy, energy market, direct costs, economic advantage JEL classification: Q40, Q41, Q43, Q47
|
|
The Valuation of the Company ZETOR TRACTORS a.s.
Richterová, Judita ; Strouhal, Jiří (advisor) ; Pinka, Dušan (referee)
The aim of this thesis is to evaluate the company ZETOR TRACTORS a.s. The diploma thesis is divided into two parts. The first one - theoretical part contains the terms, procedures and methods that must be defined before the actual valuation. It includes more detailed information about strategic analysis and its components, financial analysis, the procedure for making financial plan and the various valuation methods. The second part - practical part contains methods applied to the company ZETOR TRACTORS a.s. In the conclusion of the thesis the company is valued using DCF entity method and EVA.
|
|
Doing business while studying
Kopecká, Adéla ; Kašparová, Eva (advisor) ; Novák, Pavel (referee)
This thesis is written about factors, which leads people doing business while studiing. It is more actual then ever and it is more and more popular between people. This thesis tries to find out which factors are important, that student starts his/her own business. This thesis is devided to two parts. the first one is teoretical and second one is practical. Teoretical part is about business and motivation. The aim of second part is to identifie and examine factors of motivation doing business, analysis of current situation in Czech republic and analysis of business support also in Czech republic and abroad.
|
|
Internal equity principle in the context of company strategy
Kopecký, Martin ; Nový, Ivan (advisor) ; Háša, Stanislav (referee) ; Blažek, Ladislav (referee)
The thesis deals with the scientific problem of the link between the strategic management and the compensation system using the principle of internal equity. The work is based on two pillars, namely the qualitative research and own proposed solution. The first part of the thesis describes the qualitative research and the possibilities and the synergistic effects of linking business strategy and compensation system. The qualitative research is performed as a multi-case study and investigates the phenomenon in the practice of three companies from various markets (the Czech Republic, Slovakia and Bosnia and Hercegovina) and industries (finance, IT/Telco and FMCG). The research tries to find answers to the four research questions: How does business strategy influence compensation process? How can compensation support the realization of a business strategy? How can business strategy be linked with a compensation system within the principle of internal equity? How can compensation reinforce the strategic function of the human resources management? The research is based on the study of theoretical sources as well as on practical fieldwork. The qualitative research itself uses qualitative research methods for data collection, such as observations, questionnaires, and document analysis. The population questioned was top managers, line managers and representatives of HR department. In total, 142 interviews were performed by a single person. The collected data were analyzed and the triangulation was applied. The findings were summarized and generalized into a final report that brings answers to the research questions above. The research brings valuable findings used in the second, design part of the thesis. The own proposed solution consists of two main models. The first one is a simplified scheme of the compensation system and the second one is a model of strategic segmentation of jobs. The first model could be used successfully in the business practice as well as in education. The second model of the strategic job segmentation brings answer to the question of synergistic linking of business strategy and the compensation system within the principle of internal equity. The model brings valuable findings and a foundation for further theoretical research and its further development. The model also brings practical solution to the design of related policies and processes in the strategic management of human resources. By the design of both proposed models the main objectives of the thesis were achieved.
|
|
Comparison of methods of ECLIA and ELISA in determining the beta-CrossLaps
KOŽANTOVÁ, Jana
Osteoporosis is a very old disease affecting a large majority of population. Its occurrence rate has been growing permanently. It is a systemic disease of bones for which the decrease in bone mass, i.e. of inorganic as well as organic bone part is characteristic. Typical symptoms are osteoporotic fractures. To perform an in time diagnostics of the disease, it is necessary to execute the necessary examinations. One of them is also the laboratory determination of markers of bone resorption and new creation for finding out the state of bone metabolism. The target of my bachelor thesis was to find out the level of the bone resorption marker (beta-CrossLaps) by means of ELISA and ECLIA methods on the same serum from patients with the diagnosed osteoporosis and to process statistically the results. In the next part I dealt with the structure and functions of bones. Then I focused on markers of bone formation and resorption. Finally I mentioned the bone metabolism and its control mechanisms. I concentrated mainly on the metabolism of calcium, D vitamin, parathormone and calcitonin. I carried out the practical part of my bachelor's thesis in the accredited private laboratory STAFILA, spol. s r. o. in České Budějovice. The procedure of my work followed the standard operating procedure of the laboratory. In the research, in total 66 serums of patients with osteoporosis were analysed by me. At first, I determined the concentration by beta-CrossLaps method based on the principle of sandwich ELISA on the appliance NexGen Four from TestLine company. Then I analysed the same samples on the automatic analyser IDS-iSYS from IDS company, this time by ECLIA method. Both appliances on which the determination was executed, principles of both methods, applied analytic sets and the procedures of analysis are described in the methodical part. In the next part of my bachelor's thesis, the results of my measuring are stated. At first I entered the concentrations beta-CrossLaps in ng/ml measured by both methods into the table and for the respective samples I stated the sex and years of birth of individual patients. Moreover I prepared a graph illustrating the share of men and women of various age categories in my research. The second graph shows the differences in values of beta-CrossLaps concentrations between both methods. Resulting concentrations were subject to regression analysis. I applied linear regression and Grubbs test for finding out the outlying values excluded from the further statistical processing. I performed Passing-Bablok regression based on the remaining values. As a result of regression equation and 95% CI of the slope B and intercept A, the proportional error of measuring was rejected but on the contrary, the systematic error was confirmed. Correlation coefficient R = 0,97 shows a very good linear dependency between both methods. It turned out by practice in the laboratory that the evaluation of concentrations beta-CrossLaps from the same patients on various appliances may show partially different values. I worked at two different analysers, each of them was based on another principle, with a different sensitivity and calibration. All of this could have the influence on the resulting concentration of individual samples. The advantage of automatic analyser IDS-iSYS is a quicker determination. Moreover it is possible to perform on this apparatus all the possible examination concerning the bone metabolism from D vitamin, parathormone, osteocalcin up to bone markers. It is advantage for the patients with osteoporosis as well as with other metabolic skeleton diseases. It follows from this that all the necessary examinations may be carried out on one apparatus.
|
|
Marketing strategy of amateur theatre Tleskejtekruciš
Rafaj, Martin ; Postler, Milan (advisor) ; Jarolímek, Petr (referee)
Main goal of this thesis is the identification and evaluation of marketing strategy of the amateur theatre Tleskejtekruciš and proposal of a new strategy, that will enable the development of the theatre in region of centre Bohemia. The thesis is split in two main parts. Goal of the theoretical part is to define marketing specifics of amateur theatre. Goal of the practical part is the analysis of current marketing strategy of the theatre Tleskejtekruciš in form of SWOT analysis, competition analysis, questionaire survey ans following recommendation of a enhanced marketing strategy, based on analysis results.
|
|
Marketing mix of the fitness centre
Choutková, Aneta ; Khelerová, Vladimíra (advisor) ; Vojtíšek, Zdeněk (referee)
The aim of the thesis is to define and evaluate the marketing mix of the fitness centre World Gym Fitness Group Inc. and to recommend changes that would increase the efficiency of the marketing mix. The theoretical part is divided into two chapters and focuses on marketing mix of services and marketing environment. Within the crucial practical part there has been run a research to determine the mission of the company and clients´ satisfaction. The research is based on direct observation. The practical part contains at first general characteristics of the World Gym company. The next chapters are focused on the individual parts of the marketing mix of the fitness centre. The marketing mix includes services, price, promotion, distribution, physical environment and people. At the end all findings are summarized in the SWOT analysis and recommendations are designed to increase the efficiency of the marketing mix of the fitness centre.
|
|
Optimal production strategy of the chosen company in the area of mechanical engineering
Brachtlová, Veronika ; Průša, Přemysl (advisor) ; Všetečková, Dana (referee)
The topic of this diploma thesis is "Optimal production strategy of the chosen company in the area of mechanical engineering" - namely the EUTECH join stock company, or more precisely its toolshop division, which deals with the manufacture of injection moulds, parts and production of special devices for aircraft industry. The aim of the paper is to evaluate, according to the defined factors, what is for the EUTECH join stock company more favourable - invest in purchase of the 5-Axis CNC machining center technology and deal with this process inside of the company or ensure this technology in cooperation with another companies. The thesis is divided into two main parts - theoretical and practical. In the theoretical part, the subjects of operation management theory and production are dealt with. The practical part deals with the production strategy of the EUTECH join stock company, or more precisely of its toolshop division in detail. The company is briefly introduced, the situational analysis of division toolshop is conducted and the production process of the company is examined. The final chapter deals with the use of cooperation in the toolshop division. The main and other factors affecting the choice of "product or sell" strategy are evaluated and consequently is decided which strategy is in case of the 5-Axis CNC machining center technology more favourable.
|
guest ::
