| |
|
Makroekonomický dopad mateřské (a rodičovské) dovolené ve srovnání České Republiky s Brazílií
Kalkusová, Marie ; De Castro, Tereza (advisor) ; Neumann, Pavel (referee)
This thesis aims to estimate the macroeconomic impact of maternity and parental/paternal leave in the Czech Republic and Brazil. In addition, the thesis stresses out the costs of Czech model application to Brazil and vice-versa. The first chapter brings a theoretical framework. It compares the analyzed policies in both countries and introduces the relevant terms. The second chapter estimates the costs of maternity and parental/paternal leave related to public expenditure and GDP for the years 2005-2014 and brings own simulation model for Czech model application to Brazil and vice-versa. The third chapter analyses the inefficiencies and suggest possible mitigation. The results show the costs of 0.71% of GDP and 1.66% of public expenditure in the Czech Republic and 0.50% GDP and 2.27% of public expenditure in Brazil in 2014. The Czech model applied in Brazil would be very costly and the opposite scenario would lead to the decrease of macroeconomic burden in the Czech Republic. The thesis also analyzes the influence of maternal and parental leave in other areas, such as labor market, where the current structure may penalize Czech women in long term. By this analysis, the thesis contributes to the current debate about the impact, the length and costs of maternity and parental leave.
|
|
Míry podobnosti pro nominální data v hierarchickém shlukování
Šulc, Zdeněk ; Řezanková, Hana (advisor) ; Šimůnek, Milan (referee) ; Žambochová, Marta (referee)
This dissertation thesis deals with similarity measures for nominal data in hierarchical clustering, which can cope with variables with more than two categories, and which aspire to replace the simple matching approach standardly used in this area. These similarity measures take into account additional characteristics of a dataset, such as frequency distribution of categories or number of categories of a given variable. The thesis recognizes three main aims. The first one is an examination and clustering performance evaluation of selected similarity measures for nominal data in hierarchical clustering of objects and variables. To achieve this goal, four experiments dealing both with the object and variable clustering were performed. They examine the clustering quality of the examined similarity measures for nominal data in comparison with the commonly used similarity measures using a binary transformation, and moreover, with several alternative methods for nominal data clustering. The comparison and evaluation are performed on real and generated datasets. Outputs of these experiments lead to knowledge, which similarity measures can generally be used, which ones perform well in a particular situation, and which ones are not recommended to use for an object or variable clustering. The second aim is to propose a theory-based similarity measure, evaluate its properties, and compare it with the other examined similarity measures. Based on this aim, two novel similarity measures, Variable Entropy and Variable Mutability are proposed; especially, the former one performs very well in datasets with a lower number of variables. The third aim of this thesis is to provide a convenient software implementation based on the examined similarity measures for nominal data, which covers the whole clustering process from a computation of a proximity matrix to evaluation of resulting clusters. This goal was also achieved by creating the nomclust package for the software R, which covers this issue, and which is freely available.
|
|
The Issue of Nursing Care in Old People's Homes
MARKOVÁ, Štěpánka
The thesis deals with the issue of nursing care in old people's homes. Given the improving medical and nursing care and also the prevention of diseases, the human life extends. This leads to the aging of population. Therefore, it is essential to understand this issue, its interconnection with nursing care, but also to find the right approach to the elderly in residential facilities providing social services. The theoretical part of the thesis deals with old age and aging, behavioural changes in old age, specifics of communication with the elderly, long-term care for the elderly, care for a man in nursing homes. It deals with the work of nurses in old people's homes and with their education. Five objectives were set within the framework of the research. The first objective was to determine areas of nursing care, in which the nurses working in old people's homes have most problems. The second objective was to find out how the nurses manage physical strain. The third objective was to determine how the nurses manage psychical strain. The fourth objective was to find out what theoretical knowledge and practical skills the nurse must have. The fifth objective was to identify possibilities of further training for nurses working in old people's homes. Qualitative research was applied in the empirical part of the thesis. The method of non - standardized interview was used. The research group consisted of 10 nurses who work in residential facilities for the elderly in old people's homes. To process the interviews, the open coding technique was applied - a paper-and-pencil method. To complement psychical resilience of nurses, S.O.C questionnaire by A. Antonovsky was used. There were 42 questionnaires used in the research. The interviews with the respondents showed that the work of a nurse in homes for the elderly is physically and mentally demanding. And it is obvious that nurses feel the mental strain as more damaging. The physical demands are connected with the state of the client and his diseases but also with the space limitations of homes and night shifts. The mental burden is caused by similar factors and also by the family of the client, specifics of the communication with the elderly, cooperation with the hospital, working atmosphere, responsibility and keeping records. Next important factor that negatively influences mental state of the nurses is a lack of prestige and recognition of their work. Even though the nurses feel both types of stress, most of them cope with it without problems and they try to restore their balance in their leisure time. The conclusions of the thesis also point to the high demands and wide range of expertise and skills required from the nurses when providing care. Even specialized procedures are carried out in homes. Nurses must know how to communicate, handle conflict situations, co-operate with colleagues from different fields. Great emphasis is placed on independence in evaluating the health state of the client while ensuring the nursing care. The nurse must have personal qualities for work with the elderly. Another important component of their work is their knowledge and practical skills in the field of social work theoretically backed by the Act 108/2006 Coll.
|
|
Optimalization of material flow in automotive industry
Kolář, Tomáš ; Jirsák, Petr (advisor) ; Vinš, Marek (referee)
This master thesis is focussed on optimalization of material flow in an automotive company. First part introduce theoretical background. Automotive industry and its actual trends on global markets. Follows short introduction of the company where project of this thesis was executed. Main theoretical part describes concept of lean management, its tools in practical examples, but it is also focussed on philosophical approach to the work and mindset of the company. Follows the aplication part based on theoretical background. The whole project of this master thesis is focussed on specific area called PC store. At first this area is showed in context of overall material flow. Shortly there are introduced processes and areas where full material packaging flows. Follows deeper analysis and optimalization of PC store itself. There are three approaches of stock and lead time reduction applied. Last part shows the comparison of initial and future state including performed changes.
|
|
Výběr a implementace open source nástroje pro řízení portfolia projektů
Marek, Jan ; Chlapek, Dušan (advisor) ; Kučera, Jan (referee)
Methods and ways of implementation of changes and innovations in companies through project management are in today's society very well established. There exists methodologies, techniques and tools for the management of individual projects. However in a role of project manager, I very often faced the fact that companies are performing the project portfolio management in very intuitive way. This in itself leads to failed and prematurely terminated projects, initiation of the wrong projects or realisation of correct projects, but at the wrong time. Very often I have also recognized, that there is lack of awareness of fact, that there are also Open Source applications that can help with the organization's portfolio. This thesis deals with the definition of requirements, search and selection of proper OSS application and subsequent implementation. In the first part of this thesis I prepare a theoretical framework about PPM, and on that basis then identify and verify a set of requirements for selection of right OSS PPM application. The next section of thesis describes searching for suitable applications from a variety of sources, assessment against the requirements and the final selection. In the last part the implementation project is drafted, which aims to serve other colleagues in project management as one of the possible implementation paths. The outputs are then continuously confronted with experts in matter of projects and project management in the field of IT in order to maximize symbiosis between theory and real life experiences. Virtually every project management methodology defines the collection of already-proven techniques, best practices or lessons learned from the previous similar implementations. The main contribution of this thesis I see in fact that it contains not only the design of the project implementation, but also describes a logical path, what leads to the result. Therefore this thesis could be used as a base or discussed best practice, when a project of implementation of PPM application in place.
|
|
ELECTRON BEAM REMELTING OF PLASMA SPRAYED ALUMINA COATINGS
Matějíček, Jiří ; Veverka, J. ; Čížek, J. ; Kouřil, J.
Plasma sprayed alumina coatings find numerous applications in various fields, where they enhance the properties of the base material. Examples include thermal barriers, wear resistance, electrical insulation, and diffusion and corrosion barriers. A typical structure of plasma sprayed coatings, containing a multitude of voids and imperfectly bonded interfaces, gives them unique properties - particularly low thermal conductivity, high strain tolerance, etc. However, for certain applications such as permeation barriers or wear resistance, these voids may be detrimental.\nThis paper reports on the first experiments with remelting of plasma sprayed alumina coatings by electron beam technology, with the purpose of densifying the coatings and thereby eliminating the voids. Throughout the study, several parameters of the e-beam device were varied - beam current, traverse velocity and number of passes. The treated coatings were observed by light and electron microscopy and the thickness, structure and surface morphology of the remelted layer were determined and correlated with the process parameters. Based on the first series of experiments, the e-beam settings leading to dense and smooth remelted layer of sufficient thickness were obtained. In this layer, a change of phase composition and a marked increase in hardness were observed.\n
|
|
Fluidized-bed Combustion of Dry Stabilized Sewage Sludge in Oxy-fuel Mode
Moško, Jaroslav ; Pohořelý, Michael ; Durda, Tomáš ; Zach, Boleslav ; Šyc, Michal ; Svoboda, Karel
Sewage sludge is an inevitable waste stream from wastewater treatment and its disposal is complicated due to specific characteristics of its composition. Sewage sludge combustion/incineration is the only suitable way for disposal of large volumes of sewage sludge containing POPs and some heavy metals. Sewage sludge combustion reduces the volume of such waste and causes destruction of organic contaminants. Oxy-fuel combustion is a technology for simplifying CO2 sequestration from the flue gas by using nearly pure oxygen instead of air for the combustion. In order to control the combustion temperature, part of the flue gas is recycled to combustion chamber. The paper brings information about investigation of the effects of combustion temperature and concentration of oxygen in inlet combustion media on the emissions of NOx, N2O and SO2 in FB combustion of sewage sludge. The experimental results have shown that an increase in combustion temperature leads to an increase in NOx and to a decrease in N2O emissions in the temperature range 750–930 °C. The lowest SO2 emissions were measured in the temperature interval from 800 to 820 °C in all experiments with different oxygen concentration in inlet gas. It was found that when the oxygen concentration in inlet gas increased, the emissions of SO2 increased while emissions of NOx slightly decreased.
Fulltext: content.csg -  PDF
Plný tet: SKMBT_C22016112214480 - PDF
|
|
Freezing technology of bull sperm in relation to its survivability and fertilization ability
Doležalová, Martina ; Stádník, Luděk (advisor) ; Jiří, Jiří (referee)
The aim of optimalization the insemination doses production is to provide the highest fertilization ability of spermatozoa during the demanding proces of processing fresh semen and its subsequent cryopreservation. Temperature changes causes spermatozoa damage during the cooling and freezing. Spermatozoa is exposed to cold shock and many others limiting factors, which leads to cell death and therefore to decline of fertilization ability of thawed insemination doses. For increasing spermatozoa resistance, exactly the plasma membrane resistance against cold shock was fraction of egg yolk LDL cholesterol (low density lipoprotein) at various concentrations into the comercially produced diluents added. It is believed that LDL acts possitively to plasma membrane and helps to maintain the fertilization ability of spermatozoa after thawing. Following step in the proces of insemination doses production is slow cooling of diluted semen and equilibration, when the straws are store at cooling box for 30 minutes to 240 hours. This period is necessary to penetrate of certain diluent components into the spermatazoa also maintain the balance between their intracellular and extracellular concentration. Also important is subsequent freezing temperature gradient of insemination doses. The most suitable freezing method is based on computer controlled temperature decline in freezing chamber which allows the precise control of ice crystals formation that could tear and kill the cell.
During 2012 to 2016 was repeatedly collected semen from the group of breeding bulls (n = 27, Holstein and Czech Fleckvieh breed) at AI centre. Semen which fulfill the standard entrance conditions in first step was evenly into several parts divided. For dilution the three types of comercially diluents AndroMed, Bioxcell and Triladyl with and without LDL addition were used. Into the diluents AndroMed and Bioxcell the concentration of LDL 4 %, 6 % and 8% into the dilent Triladyl 6 %, 8 % and 10 % was added. Diluted semen was filled into the glass capillares with volume 0,1 ml and temperature +4 °C. Subsequently the sample was placed to cold bath (0°C) for 10 minutes. Then the volume of capillare with physiological solution (37 °C) was mixed and for next 120 minutes was incubate. The effect of cold shock to proportion of live spermatozoa was evaluated by using Eosin and Nigrosine staining technique during heat test of spermatozoa survivability after spermatozoa heating and after 120 minutes of incubation.
The more suitable semen diluents which provide the higher spermatozoa resistance against cold shock were AndroMed and Bioxcell. Together the possitive effect of LDL addition into the diluents to lower decrease of proportion of live spermatozoa during heat test was found (P<0.05). The most suitable LDL concentration which had a favorable influence at spermatozoa resistance against cold shock was 6 % in diluent Bioxcell. Values of the proportion of live sperm were higher at the beginning of the heat test (+1.31% to + 3.2%) and after 120 minute incubation (+5.82% to +8.41%) compared to other diluents with and without addition of LDL.
In the next step the process of equilibration was optimized, is an important part of insemination doses production. The effect of the length of equilibration for subsequent fertilization ability of spermatozoa was evaluated using spermatozoa motility based of CASA and proportion of live spermatozoa after thawing and during heat survival test lasting 120 minutes (37 ° C). Suitable semen was diluted by comercially used diluent AndroMed based on soya lecithin, filled into the straws (0.25 ml), cooled and equilibrated in cooling box for 30, 120 and 240 minutes and freezed in programmable freezing box applying four types of freezing curves differing in temperature rate decline. There was used standard and by producer recommended 3. phase freezing curve, then 2. phase freezing curve, and 3. phase freezing curve with slower as well as rapid decline of temperature rate in freezing chamber, compared with standard freezing curve. The highest spermatozoa motility was found using 240 minutes of equilibration by +2.72% and +4.58% compared to other lengths of equilibration (P <0.05 to 0.01). The highest proportion of live spermatozoa was found using 120 minutes of equilibration (+6.87 % and +8.68 %). The highest average spermatozoa motility during heat test after thawing was achieved by using 2. phase freezing curve (from +2.97% to +10.37%, P <0.05), also in the proportion of live spermatozoa (from + 4.37% to +8.82%, P <0.01). When evaluating interaction between the length of equilibration and freezing curve (standard 3. phase and 2 . phase freezing curve), the highest average spermatozoa motility and proportion of live spermatozoa using 240 minutes of equilibration by both freezing curves was reached, there was no statistically significant differences. As well as, in all evaluated parts of this study the individual differences between ejaculate of bulls and within semen from one bull (P <0.05) as secondary effect were found.
To maintain good fertilization ability of semen during cryopreservation is necessary to increase the spermatozoa resistance against cold shock using addition of correct concentration of LDL into the commercially used diluents AndroMed and Bioxcell. Subsequently the fertilization ability of insemination dose is influenced by cooling, the length of equilibration and freezing. The length of equilibration 120 minutes and more as well as gentle way of freezing according to freezing curve, which ensures a gradual decrease of temperature in freezing chamber provided the higher average spermatozoa motility and proportion of live spermatozoa.
|
|
Antioxidant, anti-proliferative and immunomodulatory effect of fruits, vegetables and mushrooms in vitro
Doskočil, Ivo ; Havlík, Jaroslav (advisor) ; Orsák, Matyáš (referee)
Recently there has been an increasing interest in discovering of new species of plants and mushrooms which have antioxidant or anti proliferative activity. The interest is caused by the fact that these species have medicinal and food utilization. These properties of plants and mushrooms can be used when dealing with many diseases which may be connected with oxidative stress (inflammatory bowel disease, cardiovascular disease, hypertension, and tumour disease, etc.).
The thesis propounds characteristics of in vitro antioxidant and anti proliferative activity of 19 types of juices and 28 methanol extracts of fruits and vegetables, which are common parts of a diet. In the thesis there are also characteristics of 13 ethanol extracts of edible mushrooms of the order of Polypore (Popyporales). Antioxidant activity was quantifie by 2, 2 diphenyl 1 picrylhydrazyl (DPPH), oxygen radical absorbance capacity (ORAC), and inhibition of nitric oxide (NO) production. Cytotoxicity was measured by MTT (3 (4,5 dimethylthiazol 2 yl) 2,5 diphenyltetrazolium bromide. Immunomodulatory activity was determined by an assay of phagocytic activity of human neutrophil granulocytes. Further a total phenolic content (TPC) and total beta glucan content were investigated; these are considered to be the potentially active constituents participating in mentioned activities.
From the obtained results it is evident that juices (TPC = 1603.2 mg GAE/L; ORAC = 438.5 umol TE/g)
and a bilberry (Vaccinium myrtillus) fruit extract (ORAC 836.6 umol TE/g; DPPH = 404.6 umol TE/g) showed
the highest antioxidant activity of all tested samples of fruits and vegetables. Capsicum (Capsicum L.)
juices (TPC = 642.1 mg GAE/L; ORAC = 127.9 umol TE/g) and a radish (Raphanus sativus L.) extract
(ORAC 724.5 umol TE/g; DPPH = 52.2 umol TE/g) also proved to have the high values of antioxidant activity. From the tested fruits and vegetables the following inhibited to produce a nitric oxide: onion (Allium cepa L) juices (lowered the NO production by 57%), tangerine juices (Citrus reticulata Blanco)(by 52%), broccoli (Brassica oleracea var. botrytis italic) extract (by 21%), and orange (Citrus sinensis Pers.) extract (by 10%). Concerning edible
mushrooms, Lentinus tigrinus (Bull.) Fr. (TPC = 216.2 umol GAE/g of extract), Ganoderma lucidum (Curtis) P. Kras (TPC = 257.9 umol GAE/g of extract), and Royoporus badius (Pers.) A.B. De (TPC = 257.8 umol GAE/g of extract) presented the highest phenolic content. Sparassis crispa (Wulfen) Fr. (117.4 mg/g of extract) had the highest content of beta glucan. Substantial effect on phagocytic activity of granulocytes was noticed in connection with Neolentinus lepideus (Fr.) Redhead & Ginns, Polyporus squamosus (Huds.) Fr., and S. crispa. In connection with the latter of mentioned mushrooms, a moderate inhibitory effect towards HT 29 human colorectal adenocarcinoma cell line
(IC50 = 107 ug/ml of extract) was noticed.
The results indicate that the tested plants and mushrooms can be beneficial when reducing the negative effects of oxidative stress. The oxidative stress has been recognized as a contributing factor to a whole range of diseases and the reduction of the oxidative stress may lead to the decrease in the possibility of the diseases´ progression. The results show the possible favourable effects on the human health. When evaluating the results, the following fact should be taken into consideration; the in vitro tests and screenings are considered to be the first phase of systematic research of the effects and serve for the choice of respondents for further detailed studies.
|
guest ::
