| |
|
The Founders of Post-Keynesianism and the Concept of Reswitching
Kraffer, Robin ; Potužák, Pavel (advisor) ; Chytilová, Helena (referee)
The thesis deals with the evolution of thoughts of Joan Robinson's, Nicholas Kaldor's, Piero Sraffa's and Luigi Pasinetti's with regards to the issue of reswitching. Discussing Robinson, Kaldor, and Sraffa, it addresses the importance of the discussion on imperfect competition and Keynes's theory for developing their opinions within the capital theory. This issue was challenged in the 50s by Robinson who asked how capital can be measured. She discovered an option of reswitching to a more capital-using technique during a wage increase, but she did not focus on it very much. The thesis also seeks the importance of Sraffa's solution to the invariant standard of value for developing the debate on reswitching the technologies in the 60s, which was joined by both Pasinetti and Robinson. However, Robinson refused again in the 70s to deem the reswitching important within the critique of the neoclassical theory, and thus joined Kaldor who had voiced similar thoughts. At the end of the thesis, the question of Robinson underestimating the importance of reswitching, as pronounced by Pasinetti, is answered - she underestimated it in the 50s, whereas it is impossible to give a clear answer when it comes to the 70s, despite the differences found among Post-Keynesians and Neo-Ricardians.
|
|
Empirical analysis of Okun’s law in Iceland
Zajíček, Zdeněk ; Slaný, Martin (advisor) ; Chytilová, Helena (referee)
This thesis deals with empirical analysis of Okuns law in Iceland. Okuns hypothesis of negative relationship between real GDP and the rate of unemployment is being tested on two models, difference and gap, using OLS estimation. Also there are two filtration methods used (Hodrick-Prescott and Baxter-King) for gap model estimation. The results of all models showed weak relationship of variables, but proved the hypothesis. In the following part, the same procedure is being used on Finlands data, to get comparison of coefficients. Results for Finland showed weaker bond of variables than in Iceland, but the Okuns hypothesis still holds. Last part is focused on finding the sensitivity of rate of unemployment to changes in added value of each economical sector in Iceland using the production approach model. This model gave inconclusive results due to insufficient data available.
|
|
Global value chains in the coffee industry focused on Vietnam
Klumparová, Adéla ; Vlčková, Jana (advisor) ; Hnát, Pavel (referee)
Aim of this diploma thesis is to describe functioning of global coffee value chains and this knowledge then apply to the coffee industry in Vietnam which serves as a case study. The introductory chapter focuses firstly on institutional background of value chains, processes and management processes used in the agricultural industry. The thesis also contains analysis of global coffee value chain, including the identification of entities engaged in the chain and their contribution to the creation of added value. Next chapter describes the development of the world coffee market and production of the world's major producers and exporters of coffee. The thesis also deals with the topic of economic and social sustainability and the impact of global value chains on the environment. Final part of the thesis concentrates on the position of the coffee industry in Vietnam, its structure and development over the past 40 years. Attention is paid also to a problematic position of small growers or to the opportunities of the development of the local coffee industry.
|
|
The Valuation of the Company ZETOR TRACTORS a.s.
Richterová, Judita ; Strouhal, Jiří (advisor) ; Pinka, Dušan (referee)
The aim of this thesis is to evaluate the company ZETOR TRACTORS a.s. The diploma thesis is divided into two parts. The first one - theoretical part contains the terms, procedures and methods that must be defined before the actual valuation. It includes more detailed information about strategic analysis and its components, financial analysis, the procedure for making financial plan and the various valuation methods. The second part - practical part contains methods applied to the company ZETOR TRACTORS a.s. In the conclusion of the thesis the company is valued using DCF entity method and EVA.
|
|
Valuation of the MSV Metal Studénka, a. s.
Honc, Adam ; Strouhal, Jiří (advisor) ; Smrčka, Luboš (referee)
The aim of this thesis is to determine the market value of joint-stock company MSV Metal Studénka for 31. 12. 2015. The thesis is divided into theoretical-methodological and practical part. The former contains the definitions of terms, techniques and methods which relate to not only the problems of company appreciation but also insolvency law focusing on corporate restructuring. In the practical part, the theoretical groundwork is applied. After the initial introduction of the company including a brief description of the course of insolvency proceeding, a strategic and financial analysis is conducted. After the evaluation of the company's financial health and future perspective, a division of assets into operationally necessary and unnecessary, analysis and value generator prognosis, financial plan formulation and the evaluation itself follow. For the final company appreciation, the discounted cash flow method in the variant of free cash flow to the firm (FCFF) is used.
|
|
Clustering and regression analysis of micro panel data
Sobíšek, Lukáš ; Pecáková, Iva (advisor) ; Komárek, Arnošt (referee) ; Brabec, Marek (referee)
The main purpose of panel studies is to analyze changes in values of studied variables over time. In micro panel research, a large number of elements are periodically observed within the relatively short time period of just a few years. Moreover, the number of repeated measurements is small. This dissertation deals with contemporary approaches to the regression and the clustering analysis of micro panel data. One of the approaches to the micro panel analysis is to use multivariate statistical models originally designed for crosssectional data and modify them in order to take into account the within-subject correlation. The thesis summarizes available tools for the regression analysis of micro panel data. The known and currently used linear mixed effects models for a normally distributed dependent variable are recapitulated. Besides that, new approaches for analysis of a response variable with other than normal distribution are presented. These approaches include the generalized marginal linear model, the generalized linear mixed effects model and the Bayesian modelling approach. In addition to describing the aforementioned models, the paper also includes a brief overview of their implementation in the R software. The difficulty with the regression models adjusted for micro panel data is the ambiguity of their parameters estimation. This thesis proposes a way to improve the estimations through the cluster analysis. For this reason, the thesis also contains a description of methods of the cluster analysis of micro panel data. Because supply of the methods is limited, the main goal of this paper is to devise its own two-step approach for clustering micro panel data. In the first step, the panel data are transformed into a static form using a set of proposed characteristics of dynamics. These characteristics represent different features of time course of the observed variables. In the second step, the elements are clustered by conventional spatial clustering techniques (agglomerative clustering and the C-means partitioning). The clustering is based on a dissimilarity matrix of the values of clustering variables calculated in the first step. Another goal of this paper is to find out whether the suggested procedure leads to an improvement in quality of the regression models for this type of data. By means of a simulation study, the procedure drafted herein is compared to the procedure applied in the kml package of the R software, as well as to the clustering characteristics proposed by Urso (2004). The simulation study demonstrated better results of the proposed combination of clustering variables as compared to the other combinations currently used. A corresponding script written in the R-language represents another benefit of this paper. It is available on the attached CD and it can be used for analyses of readers own micro panel data.
|
|
Plan for improvement of internet marketing of chosen engineering company
Pokorný, Zdeněk ; Hinčica, Vít (advisor) ; Olšanová, Květa (referee)
The objective of this bachelor thesis is to evaluate the contemporary usage of internet marketing by company POKORNY, spol. s r. o. and at the same time to suggest its possible further development. Within contemporary usage of internet marketing is analysed company's website on the basis of its overall quality, content and its statistical values. In connection to company's website is subsequently analysed its optimization for search engines as well. Furthermore the thesis analyse usage of 2 social networks, which are Facebook and LinkedIn. Afterwards the thesis suggest possible further development of company's internet marketing which includes recommendation to eliminate discovered current deficiencies and suggestions to start using new available tools. The result of these recommendations should be better competitiveness of the company.
|
|
The proposal of CRM strategy in selected company
Gorolová, Pavlína ; Koliš, Karel (advisor) ; Kociánová, Jana (referee)
This thesis discusses the philosophy of customer relationship management. Main goal of the work is to analyze the processes in a specific company and to recommend a solution for customer relationship. Thesis is divided into three parts. Theoretical part presents readers with basic concepts of customer relationship management, its principles, development and strategy. Furthermore, pays attention to customer and their value. Methodical part defines the method of analysis, which is applicated in practical part. Practical part is focused on a specific company, on its introduction, history and analysis of internal and external environment. In conclusion of this thesis individual recommendations and improvement proposals are listed.
|
|
Creation of the Enterprise Architecture model according to the TOGAF framework
Čapek, Jan ; Doucek, Petr (advisor) ; Zeman, Petr (referee)
The present diploma thesis aims at introducing the Enterprise Architecture and creating an abstract model of a company. The primary focus is on application and process layers as defined in the architecture framework TOGAF. The thesis is divided into theoretical and practical part. The theoretical chapter starts with a business model analysis which means to describe mission vision and companys values as a part of the strategy framework. Furthermore the business processes are described in the latter part of this section. This chapter attempts to explain how to map a business process and to categorize it by nature and maturity level. Penultimate chapter introduces the Enterprise Architecture in general. This section includes arguments as to why the companies should be concerned with the Enterprise Architecture advantages of the Enterprise Architecture implementation into the companys documentation relationship of companys core business and IT and examples of the Enterprise Architecture frameworks. The last chapter deals with the TOGAF framework where Architecture Development Method is described. This means how Enterprise Architecture model is created and how to implement changes into the layers according to the TOGAF framework. Simultaneously the last section of this chapter describes the reference models which provide graphical overview of all abstractions layers. The practical part of the thesis elaborates on the theoretical part using the Architecture Development Method process in order to create the Enterprise Architecture model according to TOGAF framework. Same as the theoretical part it only focuses on the application and process layer. Firstly the business model is decomposed into vision mission and companys values to the companys strategy and business goals in order to grasp further understanding of business processes detailed description. Subsequently the abovementioned aspects are recomposed to create process map which provides the management overview. The application layer undergoes the same process; nonetheless the process map is replaced by information system description and reference model creation. Once the models are created the thesis compares them with the business and strategic goals. The benefit brought by this thesis is critical evaluation of current status to propose changes to achieve target architacture according business and strategic goals established by management.
|
guest ::
