|
|
Roof structure of construction for social purposes
Bašista, Ján ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
The work treats the static recalculation of an existing roof structure of a construction for social purposes and proposes two variants of the design of a new roof structure. The construction has a rectangular ground plan of 30 m x 47 m and the roof structure is placed on the load bearing circumference concrete walls. Except for the load constituted by the function of the construction and by the climatic area, an extra load of 2 tons suspended at any place of the structure is considered because of the special requirement of working and technological equipment. The variant no. 1 is designed from the steel S355. The variant no. 2 is designed as a combination of the wood GL24h and the aluminium EN-AW 5083. Both of the variants have 11 transverse load bearing girders. The purlins are perpendicular to the girders and are placed on them. Stiffness is secured by roof stiffeners.
|
|
|
Project Documentation of Electrical Wiring with Automation in Scope for Realization of Family House
Jaroš, Zdeněk ; Janík, Daniel (referee) ; Mastný, Petr (advisor)
The aim of this work is to get acquainted with problems connected with a designing of power and data distribution, a definition of principles necessary for a drawing design and a project realization of an electrical installation for a detached house. The first part of the thesis deals with the definitions and principles related to safety and security administration, which must be respected at designing the project documentation. In the following part of this thesis there are presented the conditions and selected methods of connecting the object to the low voltage distribution network, methods of conducting heavy and low current rake and the lighting design. The second part deals with the designing of a specific electrical installation project for a detached house. The content presents the heavy and low current installation in a ground plan of the house, a switchboard design, a lightning conductor, and a technical documentation in accordance with actual technical standards. The technical report also includes economical evaluation of the project.
|
|
|
Technical documentation of parts made from composite materials
Vlček, Dalibor ; Urík, Tomáš (referee) ; Klement, Josef (advisor)
This bachelor thesis describes the rules applicable for creation of technical documentation of parts made from composite materials. In the first part of this paper a brief characteristics of composite materials is introduced. In the subsequent parts the thesis deals with the basic principles of creating the documentation according to the European standard EN 4408. The main aim of this thesis is to summarize the rudimental conventions that refer to drawing of technical documentation of aircraft composite parts.
|
|
|
Design of system wiring of sports hall
Jaroš, Zdeněk ; Bátora, Branislav (referee) ; Janík, Daniel (advisor)
This diploma thesis focused on designing of systematic wiring of multifunctional sports centrum. The work is divided into two parts. The first part of the work is dealing with definitions and principles necessary for electrical project documentation. There is a presentation of the KNX bus control system, which is chosen for the implementation of the systematic wiring of the sports centrum. There is also an overview of currently used systems for wiring control. At the end, the design of artificial and emergency lighting is processed using a computer program. The content of the second part of the work is a complete project documentation for construction of the multifunctional sports hall using the KNX bus system. Furthermore, the documentation draws the design of power and data distribution to the relevant floor plans of the building, the design of power and system switchboards, an overview scheme of power distribution, topology of the KNX system, budget and technical report.
|
|
|
Weldment in the engineering drawing
Černošek, Jiří ; Čípek, Pavel (referee) ; Svoboda, Petr (advisor)
Submitted bachelor's thesis is aimed at the present state of recognition in the field of weld's technical documentation. It describes individual types of welding together with basic types of marking and most important rules, which are necessary to observe during the creation of drawings or models.
|
|
|
Barrel Rifling Machine Designe and Function Analysis
Loutocký, Petr ; Hammer, Miloš (referee) ; Jankových, Róbert (advisor)
This master’s thesis is devoted to rifling technologies of the barrel bore of fire and gas arms. In cooperation with the company Winston Production, s.r.o. also enters into operation issues of selected manufacturing machine Zs 151 for barrel rifling. It contains an analysis of legislative demands on the technical documentation, description of the construction and function of machinery and materials for the creation of local operating safety rules for its operation. The part of work is also 3D model of the machine created in software SolidWorks.
|
|
|
Configuration management
Vala, Martin ; Kotek, Luboš (referee) ; Fiala, Alois (advisor)
The aim of this master thesis is to resolve the problems based on requirements of the company. Initially a theoretical part was prepared which is focused on configuration management and related terms of a particular problem. After theoretical introduction it was systematically approached to the problem and a possible solution was proposed based on analysis of the current situation taking into account configuration management. The solution was to create a technical-organizational guideline which is a tool for the elimination of errors of employees and for general overview. The final technical-organizational guideline can be found in the attachment and in the main part of this thesis describes development of the guideline.
|
|
|
Detached house with two flats in Otradov
Myška, Jan ; Sobotka, Jindřich (referee) ; Kolář, Radim (advisor)
The subject of this bachelor´s thesis is the process of building the technical part of the project documentation for the realization of a detached house with two apartments in the village Otradov. The building is architecturally designed so that projects from the rural architecture. The house has a floor with attic and partial basement. Roofing is using two different height shelves. The building is designed structural system Naturblock. This bachelor´s thesis is on theme layers of roof sloping roofs.
|
|
|
Technical writing as a specific use of language
Petrosian, Sergei ; Zmrzlá, Petra (referee) ; Smutný, Milan (advisor)
Rychlý rozvoj počítačových technologii ve dvacátém století vyústil v rostoucí potřebu technické dokumentace, která by popsala používání těchto nových technologií. Tato dokumentace se píše ve speciálním stylu,, lišícím se od stylu publicistického nebo akademického. Zatímco jiné styly psané pro širokou veřejnost používají metafory, alegorie, a jiné řečnické obraty, které mají na čtenáře zapůsobit, technické psaní používá jasný přímý jazyk, který jednoznačně popisuje fakta. Tento jednoduchý jazyk umožňuje aby byl obsah čitelný a pochopitelný i pro čtenáře kteří nejsou experty v oblasti, kterou text popisuje, a pro které angličtina není rodným jazykem. Tato bakalářská práce uvádí hlavní postupy používané v technickém psaní pro dosažení jednoduchosti a čitelnosti textu, a také různé druhy technické dokumentace a jejich popis. Jako ilustrace toho, jak jsou tyto postupy používané ve skutečné práci, tato bakalářská práce uvádí analýzu třech manuálů popisujících stejnou funkci: 1. Dokumentace konkrétní funkcionality open source projektu Foreman, která inspiruje obdobnou funkci Red Hat Satellite. 2. Přepracované instrukce, vytvořené jako návrh pro publikaci v oficiální dokumentaci Red Hat Satellite, ve stavu před kontrolou. 3. Zkontrolovaná a opravená verze, publikovaná v oficiální dokumentaci pro Red Hat Satellite.
|
|
|
Antenna system for wireless microphones
Bartoš, Adam ; Lukeš, Zbyněk (referee) ; Láčík, Jaroslav (advisor)
Master's thesis deals with the design of an antenna system for wireless sound transmission used mainly in professional sound reinforcement. The introductory part deals generally with wireless microphones, frequency bands used and proven antenna types. Next, this work deals with signal distribution that is realized using the antenna splitter. The antenna parts is focused on easy production and real usage, therefore were selected antennas with appropriate properties suitable for small series production. This thesis includes simulation of each device, their real construction design and measurements of built prototypes and final products. All three produced devices – the rack splitter, /4 antenna and Helix antenna are fully working, achieve good parameters and are ready for further manufacturing and easy modifications in case of frequency band change requirement. The conclusion includes an overall assessment of the results achieved.
|
guest ::
