|
| |
|
|
Design of UAV hardware - mechanical and electrical subsystem
Kraus, David ; Hrbáček, Jan (referee) ; Krejsa, Jiří (advisor)
Main topic of this thesis is creation of platform for testing stabilization and control algorithms for UAV. For chosen suitable model plane was designed a structure of control and power electronics. Research of suitable algorithms was made and some of them were implemented. For this algorithms gains were designed, using simulation. The whole system was tested and validated in flight.
|
|
|
Secure communication within the PX4 platform
Ligocki, Roman ; Martinásek, Zdeněk (referee) ; Číka, Petr (advisor)
PX4 platforma je jedna z nepoužívanějších softwarových balíčků pro řízení bezpilotníhosystému. Používá MAVLink protokol pro komunikaci mezi autopilotem, pozemní stanicía dalšími zařízeními v MAVLink síti. Je speciálně navržen pro bezpilotní systémy použí-vající rádia s nízkou datovou propustností. S rostoucím počtem těchto zařízení docházírovněž k růstu počtu útoků na tyto systémy. Tato diplomová práce obsahuje analízua popis bezpečnostních nedostatků v telemetrické komunikaci platformy PX4 běžící naprotokolu MAVLink. Na základě těchto nedostatků byla dále navržená a implementovánabezpečnostní řešení. Tato implementace zahrnuje šifrování, řízení přístupu, autentizacia systém pro výměnu klíčů. Bezpečnostní implementace je postavená na knihovně Mo-noCypher. Všechny části práce jsou naprogramováno v jazyce C. Cílem autora je sdíletvýsledky, kterých dosáhl s komunitou kolem paltformy PX4. Proto během finální částipráce vznikl pull request do veřejného repozitáře.
|
|
|
Fusion of drone sensors for motion planning
Semerád, Jakub ; Novotný, Josef (referee) ; Janoušek, Jiří (advisor)
This bachelor thesis deals with drone flight planning in an unknown environment. In order for a drone to be able to perceive its environment, it must be equipped with the necessary sensory equipment. This thesis discusses possible sensor equipment suitable for flight coordination and collision avoidance. Also, software for sensor data processing and drone motion planning are described and used here. LiDAR and depth camera were used for the experiment in this thesis. In the experiment the data from both sensors are fused together through ROS software and displayed in RViz simulation environment. This data are suitable for subsequent use in drone motion planning and collision avoidance.
|
|
|
The Development of Autonomous Unmanned Aircraft
Hamáček, Vojtěch ; Ligocki, Adam (referee) ; Jílek, Tomáš (advisor)
The aim of this thesis is to modify commercially produced drone DJI Matrice 100 and replace its original control unit by open source Pixhawk and its accessories. Subsequently, it deals with the selection of suitable open source firmware for Pixhawk and its configuration on the device. Another part is dedicated to the possibilities of using the Robotic Operating System (ROS) and its Mavros libraries on the onboard computer Raspberry Pi. By using Mavros, it examines the possibilities of drone flight control, both in the simulation environment and in the real environment.
|
|
|
Obstacle Avoidance System
Dražil, Jan ; Raichl, Petr (referee) ; Novotný, Josef (advisor)
This thesis deals with methods for the problem of navigation and movement of autonomous vehicles between obstacles. The thesis first describes in general terms algorithms for motion planning and obstacle avoidance. Then, the thesis discusses the PX4 firmware for UAV control. The thesis proposes a custom obstacle avoidance algorithm designed for UAVs. The sensor used for obstacle detection is a stereo camera. This algorithm was implemented in Python using the ROS framework and tested in the Gazebo simulation environment. The results are discussed.
|
|
|
Simulation of Unmanned Aircrafts in a Virtual Environment
Lindtner, David ; Lázna, Tomáš (referee) ; Gábrlík, Petr (advisor)
The master thesis deals with the issue of simulation of unmanned aircraft missions in a virtual environment. The aim of the work is to demonstrate basic and more advanced autonomous aerial missions in the simulated environment Gazebo - ROS 2. The work emphasizes the stability of the software solution and the stability of the communication between critical components of the aerial mission.
|
|
|
Obstacle Avoidance System
Dražil, Jan ; Raichl, Petr (referee) ; Novotný, Josef (advisor)
This thesis deals with methods for the problem of navigation and movement of autonomous vehicles between obstacles. The thesis first describes in general terms algorithms for motion planning and obstacle avoidance. Then, the thesis discusses the PX4 firmware for UAV control. The thesis proposes a custom obstacle avoidance algorithm designed for UAVs. The sensor used for obstacle detection is a stereo camera. This algorithm was implemented in Python using the ROS framework and tested in the Gazebo simulation environment. The results are discussed.
|
|
|
Fusion of drone sensors for motion planning
Semerád, Jakub ; Novotný, Josef (referee) ; Janoušek, Jiří (advisor)
This bachelor thesis deals with drone flight planning in an unknown environment. In order for a drone to be able to perceive its environment, it must be equipped with the necessary sensory equipment. This thesis discusses possible sensor equipment suitable for flight coordination and collision avoidance. Also, software for sensor data processing and drone motion planning are described and used here. LiDAR and depth camera were used for the experiment in this thesis. In the experiment the data from both sensors are fused together through ROS software and displayed in RViz simulation environment. This data are suitable for subsequent use in drone motion planning and collision avoidance.
|
|
|
Simulation of Unmanned Aircrafts in a Virtual Environment
Lindtner, David ; Lázna, Tomáš (referee) ; Gábrlík, Petr (advisor)
The master thesis deals with the issue of simulation of unmanned aircraft missions in a virtual environment. The aim of the work is to demonstrate basic and more advanced autonomous aerial missions in the simulated environment Gazebo - ROS 2. The work emphasizes the stability of the software solution and the stability of the communication between critical components of the aerial mission.
|
guest ::
