|
|
Robotic arm control
Pochlopeň, Timotej ; Petyovský, Petr (referee) ; Macho, Tomáš (advisor)
This thesis deals with microprocessor system, which be intended for control of robotic arm by RC servos. The first part includes familiarization with the problems of controlling the robot. The second part contains proposal of microcontroller and electronics necessary for communication with personal computer and creating scheme and printed circuit board. The last part of this work is devoted to software of microcontroller.
|
|
|
Robotic arm control by PLC
Pleva, Damián ; Foukal, Roman (referee) ; Štohl, Radek (advisor)
The goals of this diploma thesis were to get acquainted with the model of the robotic arm Beta 6 from Merkur Company. Next design connections between control board and PLC from Rockwell Automation. Then design and realize Add-On instruction for movement in 3D space with appropriate visualization.
|
|
|
Application for Controlling Robotic Arm Workcell
Sedlák, Radek ; Rozman, Jaroslav (referee) ; Luža, Radim (advisor)
This thesis deals with creating the application for remote controlling robotic arm workplace at FIT BUT. The application is developed in C/C++ using the Qt library. The thesis first summarizes the general methodology for the design and testing of user interfaces. The thesis also describes the procedure for application analysis, user interface design, implementation and testing of the application. In conclusion, the test results are evaluated and proposed further expansion of the application.
|
|
|
Robotic Arm Mitshubishi Melfa 6 SL Control
Schindler, Petr ; Hanáček, Petr (referee) ; Zbořil, František (advisor)
This thesis is focused on the control of the robotic arm Mitsubishi Melfa 6 SL. It is a part of a bigger project, which goal is to build an online laboratory supporting the teaching of artificial intelligence. This document describes methods which can be used to control the arm, especially using personal computer. It also briefly describes the laboratory itself. The goal of this project was to create a set of routines, which can be used to control the robot using one's own software.
|
|
|
Robotic Arm - Navigation by Using Axis 214 Camera
Skládanka, Josef ; Hanáček, Petr (referee) ; Zbořil, František (advisor)
This paper is focused on recognizing the position of a cube placed in the working area of the robotic arm Mitsubishi Melfa 6 SL, using digital image from Axis 214 cameras. It briefly describes few techniques which can be used for detecting the position of an object in the image. The main focus is laid on the implemented method, which detects and analyses gaps in the grid plotted in the robot's working area.
|
|
| |
|
|
6 Axis Manipulator Control
Semrád, Michal ; Chromý, Adam (referee) ; Hynčica, Ondřej (advisor)
This master thesis discusses about designing and realization of a control system for a 6-axis robotic arm. The controlling system consist in a microcontroller LPC1756 with its firmware implemented under the Real-time operating system FreeRTOS and GUI application, running on a PC. The Microcontroller communicates with the PC through a serial line via SLIP protocol. Theoretically, it will deal with an explanation of the important terms, and describes the used robotic arm and its controlling unit. The practical part describes kinematics problems solving, firmware’s realization and GUI application.
|
|
|
Controlling of myoelectric prothesis
Tomanová, Markéta ; Bubník, Karel (referee) ; Janoušek, Oto (advisor)
The Master´s thesis summarizes the knowledge about controlling of myoelectric prostheses. The Introduction part of this work provides an overview of the anatomy of muscles and their contraction. In case of restricted function of hand, it is necessary to compensate this deficiency by using prosthetic limbs. Among one of the most technically difficult is robotic prosthesis. In this semestral work is myoelectric prosthesis replaced by a robotic arm. Arm is controlled by the electromyographic signals. The signals are recorded by Biopac acquision unit, then processed in LabVIEW and robotic system is controlled by the Arduino platform.
|
|
|
Robotic arm
Kacetl, Jan ; Křenek, Ladislav (referee) ; Rajlich, Jan (advisor)
The aim of my bachelor's work is to project a design of computer controlled robotic arm pursuant art-design goals. This concept should highlight technical issue and introduce it to human through art style. Best art style to meet this requirements is Kinetic Art.
|
|
|
Creation of materials for laboratory tasks of robotics and automation
ŠTANGL, Jiří
The bachelor thesis deals with the concept of "programmable logic controller". History of PLC and brand Simatic, manufacturers of automation technology, individual ways of programming and internal configuration of the PLC are content of the first part. The second part discusses the component of the assembly of Simatic control unit, touchscreen panel and two robots (hand and conveyor belt). This assembly realizes five laboratory tasks with a solution key and overall assessment in the last part of the thesis.
|
guest ::
