|
|
Software Architecture for Flow Based Monitoring Probe
Špringl, Petr ; Kořenek, Jan (referee) ; Martínek, Tomáš (advisor)
This thesis deals with design and implementation of software architecture for Flexible FlowMon probe, accessories for monitoring high speed computer networks based on IP flows. The probe has been developed in project named Liberouter. There is described flow based monitoring and export formats NetFlow version 5, NetFlow version 9 and IPIFX, which are very widely used. The thesis contains description of hardware part of Flexible FlowMon probe including its requirements for software, which are the base of the whole software architecture. There is detailed description of that part of software architecture which was implemented during the work on this thesis.
|
|
|
Monitoring of User Activities on Workstations
Skopal, Aleš ; Ráb, Jaroslav (referee) ; Matoušek, Petr (advisor)
This master's thesis deals with proposal of a system for monitoring of user activities on workstations Windows XP over .NET 2.0 platform. The system should monitor running programs, processes and find out user activities in these programs like movement of the mouse or writing on the keyboard. A part of whole project is a suggestion of the system which contains specifications of requirements for this system, creation of the architecture, creation of important models, suggestion of the communication between separated part of system and final compile of results. The project should get information about user's activities and also information about usage of software installed on these workstations. The final system will be tested by use case study. Last but not least, project deals with ethic questions in the context of monitoring of users and discuss law questions about this project.
|
|
|
Memory Reduction of Stateful Network Traffic Processing
Hlaváček, Martin ; Puš, Viktor (referee) ; Kořenek, Jan (advisor)
This master thesis deals with the problems of memory reduction in the stateful network traffic processing. Its goal is to explore new possibilities of memory reduction during network processing. As an introduction this thesis provides motivation and reasons for need to search new method for the memory reduction. In the following part there are theoretical analyses of NetFlow technology and two basic methods which can in principle reduce memory demands of stateful processing. Later on, there is described the design and implementation of solution which contains the application of these two methods to NetFlow architecture. The final part of this work summarizes the main properties of this solution during interaction with real data.
|
|
|
Quantification of Hydraulic Descaling Mechanisms
Hrabovský, Jozef ; Toman,, Zdeněk (referee) ; Dobeš, Ferdinand (referee) ; Horský, Jaroslav (advisor)
The issue of descaling is an important part of the forging and heat treatment of steel and semi products of steel production. Rising of new information and study of this process can increase efficiency and improve the surface quality after descaling. This thesis is focused on the mechanisms of the high pressure hydraulic descaling qualification and study of the chemical compounds of which the scales grown. To achieve all goals of this work and to get a comprehensive view of descaling process, few experimental measurements and numerical analyses were performed. All experimental measurements were focused on obtaining data about fundamental parameters and effects of the hydraulic descaling. The data obtained from measurements were applied to numerical analyses, which aimed to discover a deeper relation and to confirm the experimental results. This thesis can be divided into two main parts. The first part is devoted to parameters of the water jet study. The main studied characteristics of the high pressure hydraulic water jet were heat transfer coefficient and impact pressure at different modes such as standard or pulsating water jet. Experimentally measured data of these parameters were applied in numerical analyses. The numerical analyses were focused on studying the impact of the water jet parameters on the stresses in the oxide scale layers. A further water jet analysis was focused on the influence of the individual parts of the hydraulic system (such as water chamber or stabilizer) on its characteristics. In this part different types of the water chambers in combination with different types of stabilizers on the impact pressure values were investigated. These measurements were supported by fluid flow analysis through the hydraulic system. The second part of this work was focused on getting mechanical properties of the oxide scales from specimens prepared from standard structural steel and specimens from silicon steel. In this thesis, the influence of various parameters and characteristics was studied on these two types of steel. Mechanical properties of oxide scale structures were carried out by the Small Punch Test method. To obtain the fundamental mechanical properties such as Young´s modulus, yield strength and ultimate strength, material parameters based on the measured data were optimized. The whole work was carried out in order to get valuable and comprehensive results about high pressure hydraulic descaling process and influencing factors as well as about oxide scales themselves.
|
|
|
Possibilities of Solar Chimney Power Plants
Moravčík, Martin ; Macháček, Jan (referee) ; Procházka, Zdeněk (advisor)
This thesis contains teoretical summary of present situation of problems involved in solar chimneys development. In the first chapter there are mathematical methods for describing the functions of solar chimneys in general. It establishes figures for power output, efficiency, speed of flow inside the chimney and figures for desinging solar chimney. In the next chaper there is a division of solar chimneys and it mainly focuses on describing the solar updraft towers and solar floating chimneys. And marginally it focuses on solar downdraft towers. Next there are possibilities how to use principle of solar chimney for air conditioning and ventilation. In the next chapter it describes the use of solar chimneys, with cogeneration, hydrogen production, in cooling towers and chimneys, and there is also fully described the project in Manzanares. In the fifth chapter it describes the economy of the two comparative projects of solar chimneys, which are at the end economically analyzed and assessed. The last chapter is a summary of the objectives of this thesis, and the subsequent approach is described too and at last there is also evaluation of solar chimneys and the conclusion of this thesis.
|
|
|
Quantification of Hydraulic Descaling Mechanisms
Hrabovský, Jozef ; Horský, Jaroslav (advisor)
The issue of descaling is an important part of the forging and heat treatment of steel and semi products of steel production. Rising of new information and study of this process can increase efficiency and improve the surface quality after descaling. This thesis is focused on the mechanisms of the high pressure hydraulic descaling qualification and study of the chemical compounds of which the scales grown. To achieve all goals of this work and to get a comprehensive view of descaling process, few experimental measurements and numerical analyses were performed. All experimental measurements were focused on obtaining data about fundamental parameters and effects of the hydraulic descaling. The data obtained from measurements were applied to numerical analyses, which aimed to discover a deeper relation and to confirm the experimental results. This thesis can be divided into two main parts. The first part is devoted to parameters of the water jet study. The main studied characteristics of the high pressure hydraulic water jet were heat transfer coefficient and impact pressure at different modes such as standard or pulsating water jet. Experimentally measured data of these parameters were applied in numerical analyses. The numerical analyses were focused on studying the impact of the water jet parameters on the stresses in the oxide scale layers. A further water jet analysis was focused on the influence of the individual parts of the hydraulic system (such as water chamber or stabilizer) on its characteristics. In this part different types of the water chambers in combination with different types of stabilizers on the impact pressure values were investigated. These measurements were supported by fluid flow analysis through the hydraulic system. The second part of this work was focused on getting mechanical properties of the oxide scales from specimens prepared from standard structural steel and specimens from silicon steel. In this thesis, the influence of various parameters and characteristics was studied on these two types of steel. Mechanical properties of oxide scale structures were carried out by the Small Punch Test method. To obtain the fundamental mechanical properties such as Young´s modulus, yield strength and ultimate strength, material parameters based on the measured data were optimized. The whole work was carried out in order to get valuable and comprehensive results about high pressure hydraulic descaling process and influencing factors as well as about oxide scales themselves.
|
|
|
Design of collector
Podhorský, Michal ; Létal, Tomáš (referee) ; Horsák, Libor (advisor)
The aim of this thesis is to make the design of the collector. The work is divided into two parts. The first part will analyze the individual parts of the collector and its analytical calculation using the EN 12 952, ČSN 69 0010 and ASME I. The second part is focuses on the verification of the analytical calculation using the FEM in ANSYS and explore the most dangerous places. The result is also creating drawings documentations.
|
|
|
Design of system control and diagnostics water heating using solar energy
Kužel, Kristián ; Zuth, Daniel (referee) ; Vdoleček, František (advisor)
This thesis deals with problems related to heating of hot service water. It focuses on solar water heating, describes individual types of solar panels and summarizes the existing information about solar water heating. It demonstrates actual problems of solar system solution on a specific example of a two-generation family house, where it analyses possibilities of diagnostics and control of such system. It also deals with suggestions of possible expansion of the current solar system.
|
|
| |
|
|
Basic measurement of bipolar and unipolar transistor
Kaňa, Leoš ; Šebesta, Jiří (referee) ; Dřínovský, Jiří (advisor)
In terms of the better effectiveness in the sphere of transistor characteristics measuring, no matter unipolar (FET) or bipolar (BJT), in laboratory conditions and their better understanding in terms of thrash out a subject matter is desirable have to available workplace let us say preparation enabling this kind of measuring with modifiability wiring and with possibility to change measured component. This thesis isn‘t focused only on development of this kind of universal component for measuring but simultaneously contains brief summary about the theory and parameters of transistors. Next aim is the development and realisation of static characteristic measuring program in VEE 8.0 Pro environment. Finally the complex laboratory exercise has to be done for measuring of bipolar and unipolar transistor’s static characteristics include programs for automatic measuring. For developing of DPS was used developing system named Eagle which gives us instrument with sufficiently accuracy. In thesis is contained theory needed for measuring and programming. Except possibility of measured component change we can change transistor connection in circuit on the board. This change is available for BJT (CE, CB, CC) and unipolar JFET (CS, CG, CD) transistor’s.
|
guest ::
