|
|
Wireless Telemetry System for RC Model
Čamaj, Peter ; Prokopec, Jan (referee) ; Šebesta, Jiří (advisor)
This project deals with design and realization of wireless telemetry system, which is special used in model of plane on remote control. It solves software and hardware realization of the telemetry system, which is able to wirelessly transmit the measured cockpit values, which are clearly displayed on LCD and also represented by sound.
|
|
|
Monitoring system for model airplane
Belloň, Michal ; Dřínovský, Jiří (referee) ; Růžek, Václav (advisor)
This projekt is focused on wireless transfer of informations from air model to modeller during the flight. These informations will be displayed on LCD placed near controller of model. Project includes theoretical design of device, choosing suitable components, circuit diagram, PCB and photos of realized device.
|
|
| |
|
|
Wireles Flying Object Telemetry
Bednář, Martin ; Šimek, Václav (referee) ; Růžička, Richard (advisor)
This paper is engaged in specification, design and implementation of a telemetry module for flying object. Specifically, it focuses on the selection of the appropriate carrier frequency of the integrated circuit providing bidirectional communication to a sufficient distance and design of the protocol used in the transmission. Furthermore, the document focuses on the design of communication modules using these integrated circuits, altimeter sensor module, module to control the actuators and design of the application for mobile phones used to display the measured data. With regard to legislative and technical options, I chose a carrier frequency of 2.4 GHz. For this frequency is commercially available integrated circuit CC2511, which in cooperation with integrated circuit CC2591 should be able to provide telemetry range about 2 km. I chose BMP085 sensor for altitude measuring. It is communicating over I2C bus as well as a module for controlling the actuator, which uses a microcontroller ATMEGA48-20AU. The mobile phone communicates with the ground station via the USB bus.
|
|
|
Telemetry for Dragon IV Formula
Bezdíček, Jan ; Petrlík, Jiří (referee) ; Šimek, Václav (advisor)
The aim of this master's thesis was to design and construct complete telemetry system for the student formula Dragon IV constructed for international Formula Student competition. At first, the work deals with the measurement of the physical quantities, telemetry system and automotive sensors of the formula, their mutual communication and communication with the CAN bus. It also describes the procedure of hardware design including choosing right inertial sensors and a GPS module and their using in telemetry system. The work contains materials for production of two-layer printed circuit board extending the microcomputer BeagleBone Black on the inertial sensors and the GPS module. The bigger part of the telemetry system is the firmware for hardware and software for the computer user. Both written in programming language C++ and C# are included in this work as well. This user application serves for wireless receiving data from the hardware and their showing and logging. In addition this user application can be used for wireless hardware configuration. The final product is the complete telemetry system and it is suitable for selling to end customer.
|
|
|
Flux density measurement in electric machines
Hájek, Jan ; Vítek, Ondřej (referee) ; Janda, Marcel (advisor)
Magnetic induction is one of the basic variables. This quantity is mainly used in engines. Without a magnetic induction range of engines would not work. For example, for an asynchronous motor is the distribution of magnetic induction is very important. Measurement of cognition and values, such as magnetic induction, there's still the new findings, which are for this very important issue. Measured magnetic induction is not so easy matter. Manufacturers will attempt to make the best of magnetic induction meter. They include GAUSS / TESLAMETR model 7030 working on the Hall effect. In practice, it is possible to calculate the size of magnetic induction into the engine through programs designed for this purpose. These include ANSYS Workbench. This program is able to very accurately detect and simulate what size will have a magnetic induction. Show us the place where the magnetic flux density in the largest and the smallest engine. Evaluated using these results we can then design the engine so as to give the best characteristics and minimize losses.
|
|
|
Microelectronic Wireless Networks for Telemetry and Buildings Automation
Šulc, Vladimír ; Sýkora, Jiří (referee) ; Zeman, Václav (referee) ; Kuchta, Radek (advisor)
The thesis deals with a microelectronic wireless networks for telemetry and building automation in terms of energy consumption related to the communication in wireless networks. Assumption, mesh topology is optimal topology for wireless networks for telemetry and building automation, was proven and relation between energy consumption and devices management was shown and functional abstraction related to the energy consumption was described. Several advanced techniques and solutions on physical and network layers were proposed to increase network reliability and decrease power consumption. Proposed techniques can be easily implemented.
|
|
|
Technology of Receiving of Very Weak Signals from Interplanetary Spacecrafts
Špaček, Jiří ; Bezoušek, Pavel (referee) ; Kovář, Pavel (referee) ; Kasal, Miroslav (advisor)
The work deals with the problematics of receiving very weak radio signals and it is focused especially on systems for low rate telemetry with carrier-subcarrier modulation. The part of this work is dedicated to calculation the link budget of typicall telemetry data transmission system between the Mars and the Earth in respect of the receiving equipment, which could be developed in the Experimental sattelites laboratory on the Institute of radio electronics BUT. The main part of this work is dedicated to developing and testing the low rate telemetry data transmission system model. The model is developed for the purpose of study the effects of AWGN and phase noise on the whole system and also on its component parts. The model has been developed and described in the way of easy parameters modification. The design for each parameter of the model is described carefully. With the developed model, the study of the effects of AWGN and phase noise on the whole system and also on its component parts has been performed.
|
|
| |
|
|
Management centre for IP networks
Patala, Petr ; Skořepa, Michal (referee) ; Novotný, Vít (advisor)
This bachelor thesis deals with problems of network management and monitoring by the help of protocol SNMP and practice using this protocol. Main part is describing work with the program SNMPc, its configuration, making longterm statistics or dynamic and static parameters of network elements measuring, for example: data traffic on the router’s ports, measuring service avalaibility ftp, telnet etc., quality of service, quantity of discards pakets, informations about router’s ports, routing tables or ARP tables.
|
guest ::
