|
|
Demonstrative manufacturing system controlled by MES utilizing AAS
Černocký, Petr ; Kaczmarczyk, Václav (referee) ; Arm, Jakub (advisor)
This work examines today's modern possibilities for production management. More specifically, we focus on MES and its integration within the concept of industry 4.0 using AAS. Furthermore, a search of available open-source MES systems and their description is performed. After their commissioning, their suitability for further use is discussed. There is also an analysis of tools for creating virtual models. The IMES application, which was subsequently slightly modified, and the RobotStudio virtual model creation tool are then selected from these analyzes. This application and tool are then used to implement virtual line control using a separate MES and to basic control using AAS.
|
|
|
Digital commissioning of robotized workplace for cold spraying of rotating parts
Šimůnek, Petr ; Bražina, Jakub (referee) ; Vetiška, Jan (advisor)
This work deals with the virtual and later real commissioning of the workplace for cold spraying of rotating parts, which is located in the laboratories of the Institute of Materials Science and Engineering, Faculty of Mechanical Engineering, Brno University of Technology. The workplace put into operation in this way serves the employees of the mentioned institute for experimental activities in the field of cold spraying. The theoretical part of the thesis describes all the essentials associated with virtual commissioning and the theory of cold spray. The practical part then deals with the creation of a robotic program, including the user interface, which is used to control the workplace. Part of this diploma thesis is also the realization of the connection between the external motor driver and the robot controller via the PROFINET communication bus.
|
|
|
Digital commissioning of a robotic production system for machine tool tending
Roun, Jiří ; Bražina, Jakub (referee) ; Vetiška, Jan (advisor)
This master‘s thesis is about the digital commissioning of a robotic production system for a machine tool tending. The initial research describes the current state of the art in the field of industrial robotics. Their types and possibilities are followed by the types and SW capabilities for digital commissioning. The system analysis of the robotic work cell. The practical part of this thesis describes the creation of the digital model and SW design. At the end of the thesis is performed virtual testing of the robotic system.
|
|
|
Virtual commissioning of robotized workplace for cold spraying
Miklis, Peter ; Holub, Michal (referee) ; Vetiška, Jan (advisor)
The diploma thesis deals with the virtual commissioning of robotized workplace for cold spraying. The theoretical part of the thesis contains an overview of the current state of knowledge in the field of virtual commissioning, the theory of crating HMI user environments, deals principles of the Rapid programming language as a tool for controlling industrial robots and analysis of robotic workplace components. The practical part defines the structure of the proposed user program and user environment, which are created using software tools Robotstudio and Screenmaker. The last part discusses in detail the steps during the implementation of the created program together with the HMI into commission, which is associated with the testing of functionalities on a real device for cold spraying. The diploma thesis also includes a user manual created for operating an industrial robot.
|
|
|
Virtual commissioning of the robotized workplace for arc welding
Adolt, Lukáš ; Pavlík, Jan (referee) ; Vetiška, Jan (advisor)
This diploma thesis is focused on the design of a robotic workplace for arc welding and its subsequent virtual commissioning. The summary deals with knowledge from industrial robotics and arc welding, the system analysis is focused on the composition of the workplace and the principle of arc welding, including acting influences. In the practical part, several variants of the solution are proposed, the most suitable variant is processed in the form of a 3D model. This model is then simulated, including all processes, a control program is created, and virtual commissioning of the workplace is demonstrated.
|
|
|
FLUID HANDLING USING THE ABB YUMI PLATFORM – PIPETTING
Smolinský, Michal ; Parák, Roman (referee) ; Matoušek, Radomil (advisor)
The aim of this bachelor thesis is to create a control program for the collaborative robot IRB 14000, whose task is the accurate dosing of liquid using a pipette. The introduction introduces the collaborative robotics industry, followed by a description, development and ABB products. After the introduction of the model of the used robot, attention is paid to the issue of liquid handling, which includes the selection of a suitable pipette. The application performed by the robot and its creation forms the rest of the work, which includes, in addition to the original pipetting task, an extension in the form of a separate task. The aim of this task was to prepare a mixed drink for the purpose of presenting the used robot. The following last part describes the process of testing both tasks on a real prototype robot, the product of which is a video, which is part of the appendix.
|
|
|
FLUID HANDLING USING THE ABB YUMI PLATFORM
Červenka, Roman ; Parák, Roman (referee) ; Matoušek, Radomil (advisor)
The goal of this bachelor thesis is to design and create program for laboratory manipulation. The robot will handle beakers. For further presentation of possible usage of ABB YuMi, a program for drink preparation was made. For robot programming, RobotStudio was used, in which was used RAPID programming language. To understand the philosophy of using RobotStudio to program robots, was also one of the goals of this work. At the end the created programs were tested in robotics laboratory and the results of this work were evaluated.
|
|
|
Intelligent manipulation of laboratory objects using the ABB YuMi robot
Nevřiva, Václav ; Parák, Roman (referee) ; Matoušek, Radomil (advisor)
The aim of the master thesis is to design a laboratory station and a control program operated by a collaborative robot IRB 14000 YuMi using an integrated effector camera to identify laboratory objects and control the progress of the task. In the introductory part, collaborative robots are briefly introduced, the IRB 14000 on which the task is implemented and the RobotStudio development environment together with the IntegratedVision extension are described in more detail. The following chapters describe the laboratory task itself, its solution and testing of the designed program.
|
|
|
Virtual commissioning of the robotized workplace for glue application
Radil, Filip ; Bražina, Jakub (referee) ; Vetiška, Jan (advisor)
This diploma thesis deals with the design and virtual commissioning of a robotic workplace designed for glueing and assembling a car headlight. The thesis contains a summary of available information on the matter of virtual commissioning and industrial robotics. It also contains a system analysis of the necessary equipment, followed by a design of several workplace variants. The final solution for which the 3D model is made is selected from them. With it, in the RobotStudio software, a simulation of all processes taking place at the workplace is created. On its base, a control program is created and debugged, and virtual commissioning of the workplace is performed.
|
|
|
Virtual commissioning of palletizing / depalletising workstation
Čefelín, David ; Knoflíček, Radek (referee) ; Vetiška, Jan (advisor)
This diploma thesis is dealt with the virtual commissioning of a palletizing line, which is palletized using an industrial robot. In the theoretical part I describe the applications, divisions and effectors of the industrial robots and the reasons and the benefits of palletizing. Furthermore, the issue of virtual commissioning is described, including sensors, that are served for the proper operation of the workplace and the virtual simulation. In the practical part I describe the future workplace, creating a simulation and the program in the RobotStudio software.
|
guest ::
