|
|
Travelling Crab
Šponar, Pavel ; Kašpárek, Jaroslav (referee) ; Malášek, Jiří (advisor)
Bachelor thesis deals with a project of the travelling mechanism of the travelling crab (electric motor and gear-box) and check calculation for starting. The aim of this work is to design a travelling wheel with save, therefore it is necessary to design the suitable normalized components. The solidity calculations of the travelling wheel, the bearing and shaft ( static and dynamin straining).
|
|
|
Aspects impact trends in the operation technology of civil aviation aircraft
Korytář, Jan ; Šplíchal, Miroslav (referee) ; Chlebek, Jiří (advisor)
The aim of the work is a general description of the effects on air traffic and aircraft. The first part of the work is devoted to a brief description of the development of individual technical parameters and performance of aircraft from the 1920s to the present with an assessment of the effects. The second part of the work is about the influence of current requirements and the third part is a general view of the future development of construction and technology for more economical and environmentally friendly air transport
|
|
|
Electric drivers for robotics area
Matušík, David ; Huzlík, Rostislav (referee) ; Knoflíček, Radek (advisor)
This bachelor thesis deals with the problematic of electric drives in a robotics area. The first part focuses on the history of industrial and mobile robots. In the second part is made an evaluation of the current state in the field of electric drive units which are used for stationary and for mobile robots. Following chapter contains a research of suitable power energy supplies for direct current drives of mobile robots. The conclusion of this bachelor thesis is devoted to a critical evaluation and recommendations for constructors.
|
|
|
The influence of electrolyte additives to lead-acid batteries properties
Dohnal, Martin ; Zimáková, Jana (referee) ; Bača, Petr (advisor)
This day is a lead battery is most prevalent in the automotive industry. Which is a source of energy when starting the car. In recent times the battery is used not only for startups, but also when driving in city traffic. This behavior can know the concept of a hybrid car. Which is used an electric motor which as a result reduce emissions standing cars in cities. The electric motor is powered by lead-acid battery and a rapid discharging and reducing battery life. To extend the life developed additives to the electrolyte. In the thesis, these additives investigated. If they really have a positive effect on the battery.
|
|
|
Cars Electric Drivetrain
Guráň, Radoslav ; Kloss, Ondřej (referee) ; Kaplan, Zdeněk (advisor)
This bachelor`s thesis is a specialized research, focused on electric drive units of personal vehicles. The thesis is divided into seven main parts. The first part deals with alternative fuels. The second part divides electric drive units into various sections and describes the history of an electric vehicle. The third section focuses on electric vehicles with a battery and analyzes electric motors and energetic power banks. The fourth and fifth part of the thesis focuses on electric vehicles with fuel cells and vehicles with a hybrid drive. The sixth chapter is devoted to the developing trends. The last section discusses the ecology of vehicles with an electric drive.
|
|
|
Design of the propulsion unit of the competition model airplane with vertical take-off and landing
Pilát, Adam ; Navrátil, Jan (referee) ; Hájek, Tomáš (advisor)
This bachelor’s thesis was written in order to design the propulsion system for a vertical takeoff and landing competition model airplane intended to participate in the New Flying Competition 2022. The task of the thesis was to analyze the rules of the competition and design the propulsion system. The research section includes an analysis on the competition’s rules followed by a review of the propulsion system components. In the next section, a basic analysis of the parameters of the airplane is performed for the purpose of the airplane fulfilling the competition requirements. In the last part of the thesis, a propulsion system components selection method is proposed and carried out. The output of the thesis is a propulsion system suitable for use in the designed airplane.
|
|
|
Stroke mechanism of bridge crane
Tomeš, Jakub ; Sedláček, Martin (referee) ; Škopán, Miroslav (advisor)
The bachelor thesis deals with the design of bridge crane lifting gear for a load not exceeding 10,000 kg. The work includes the design of the basic parts of the lifting gear, such as rope diameter, rope drum and rollers. There is also included the choice of standardized parts such as electric motor, crane gearbox, flexible clutch or drum brake. The last chapter describe the strength calculation of the rope drum and the bearing life calculation together with the design of welds and tight pen. The output of the bachelor thesis is the drawings of the cable drum weld and the mechanism of the lifting mechanism.
|
|
|
Design of milling machine spindle
Kolář, Radan ; Drlík, Michal (referee) ; Blecha, Petr (advisor)
The aim of this bachelor’s thesis is the construction of the milling machine spindle The first part is the background research of the milling cutter machine. The first section also contains an overview of producers of machine-tools and their milling machines. The second part is focused on the design of the spindle according to selected parameters, including the necessary calculations. This thesis also includes spindle assembly drawing and 3D model created with Autodesk Inventor Professional 2014.
|
|
|
Design of all-terrain vehicle with electric drive
Kučera, Pavel ; Blaťák, Ondřej (referee) ; Porteš, Petr (advisor)
This master's thesis describes the design of All-Terrain Vehicle (ATV) with electric drive. The design is focused on the main parts of the ATV, which are designed with modern trends ATVs. Location of electric drive and batteries in the frame of the ATV is solved for the sport version of the ATV. Steering geometry is designed using the program Adams. For models of main components are created stress analysis in Ansys Workbench. The input is 3D model, which is created in Pro/Engineer. The braking system and wheels are designed for movement and braking of the terrain.
|
|
|
ALTERNATIVE PROPULSION FOR AIRCRAFT OF GENERAL AVIATION CATEGORY
Kaddour, Mirvat ; Hlinka, Jiří (referee) ; Rousek, Miroslav (referee) ; Třetina, Karel (advisor)
Letecká doprava jako všechny ostatní dopravy podílí na produkci emisí skleníkových plynů, což je hlavní důvod změn klimatu. Disertační práce je zaměřena na možnost využití alternativního zdroje energie (paliva, motor) v letectví, aby se snížily emise produkované letadel. Oblast,na která již pracuje je všeobecné letectví, zejména letadel kategorie LSA a VLA. Tři možnosti, alternativní zdroj energie, budou diskutovány. První používá LPG palivo, další je elektrické motory, a poslední přidání katalyzátoru a výfukového systému. U každého z nich bude uvedeno výhody a nevýhody, hlavní změnu pohon letadla nebo výfukového systému a různé výkonnosti letadla v důsledku těchto změn.
|
guest ::
