|
|
Application of thermal camera for analysis of heat
Palička, David ; Pokorný, Jan (referee) ; Lízal, František (advisor)
Within this bachelor degree thesis I have focused on the thermal losses from storage tanks serving as asphalt binders. I have used the theory of non-contact temperature measurements using a thermovision camera. In the first part of this document I deal with the history, theory and some basic principles of non-contact temperature measurements. In the second part I am examining the thermovision camera settings. The third part considers the function of the asphalt mixture production plant itself, as well as the function of storage tanks. In the last part of this thesis I analyze the results of the measurements. The goal of this analysis is to compare results of thermal losses from storage tanks heated with thermal oil, and storage tanks heated with an electrical thermocouple.
|
|
|
Temperature measurement using the pyrometers
Holík, Denis ; Kaňa, Václav (referee) ; Podaný, Kamil (advisor)
The thesis is pursuing research and analysis of information about function principles of pyrometers. Complex problematic of particular types of pyrometers and options of practical use is analysed. Basic errors of contactless temperature measurement are also included. Parameters of particular types of pyrometers are processed in the form of a table.
|
|
|
Accuracy of non-contacting Temperature Measurement
Horák, Ladislav ; Janečka, Jan (referee) ; Vdoleček, František (advisor)
This master’s thesis is specialized on the influence of correct parameters of emissivity, which depends on the temperature, wavelength and ambient environment. The investigation the parameter was taken infrared non-contact thermometer MI3 from company Raytek. To improve the quality of measurement was designed and programmed measuring utility program. The program was developed in the LabView 8.5 programming environment. To obtain the true value of the measured temperature of the target was designed and constructed the touch thermometer with the resistance dependent sensor. The thermometer is connected to the communication box of infrared thermometer and contain the same program. Nowadays are the most advanced IR thermometer with fixed parameters emissivity, which is applicable just to the real body in the vicinity of the parameter emissivity 0,95. For those IR thermometers were designed correction function, which would have temperature measured at a fixed emissivity parameter 0,95 set close to the actual value of the object.
|
|
|
Contactless temperature measurement
Závodný, Ondřej ; Bejček, Ludvík (referee) ; Beneš, Petr (advisor)
In this bachelor thesis I outlined the problems of non-contact measurement and practical verification of the basic parameters thermo camera Fluke Ti20. It is especially on the experimental measurement of the source of the reference temperature and the product to demonstrate the impact of emissivity. The aim of this work is a practical verification thermo cameras parameters, the determination of uncertainties and to explore the effects of parasitic repeated measurements. The basic part is a brief recorded history, the general relations and principles of the non-contact measurement, as well as their own use and typical parameters. In the next chapter you more acquainted with itself thermo camera, properties and basic parameters. The practical part is about the measurement itself. The main objective then was to verify the accuracy of reported thermo camera and examining the impact of emissivity.
|
|
|
Thermodiagnostics – contact and contact-free temperature measurements
Mikula, Martin ; Jankových, Róbert (referee) ; Hammer, Miloš (advisor)
This thesis is concerned with thermodiagnostics in industrial practise, which is very important for the assessment of technical condition of object on the basis of temperature, in today's time. It includes summary of contact and contact-free methods and their principle, advantages and disadvantages for aplication in industrial practise. Because of thesis it was carried out measurement in company Daikin Device Czech republic with the use of contact thermometer and two available thermocameras for solving of topical tasks relating to production.
|
|
|
Study efficiency of modern thermal insulations for buildings
Holeček, Dominik ; Skříček, Darek (referee) ; Šťastník, Stanislav (advisor)
The bachelor thesis is partly dedicated to energetic efficiency of buildings and describes possibilities how to evaluate energetic efficiency of buildings in the Czech republic. There is also detailed description of the heat transfer in buildings. We also get to know with production and characteristics of chosen thermal insulators. There are also mentioned methods how to determine thermal insulations characteristics of heat insulations, so called heat conductivity coefficient. The last and the crucial chapter of theoretic part is dedicated to thermo-reflective insulations. There are mentioned some of the basic characteristics of insulations and its material composition as well as usage and methods of thermo-reflective insulations installation in buildings. Practical part is dedicated to description of chosen samples of thermo-reflective insulations and determination of their heat resistance though Hot Box measuring method.
|
|
|
Methods of Space and Spectral Characterization of Light Sources used in Car Industries
Guzej, Michal ; Černý,, Pavel (referee) ; Samek, František (referee) ; Horský, Jaroslav (advisor)
Automotive headlamps work in very variable operating conditions during which the producer have to guarantee their primary function of seeing and being seen. During the development stage of the new headlamps the manufacturers want to eliminate defects which could led to malfunction in operation. The numerical simulations along with the test procedures are appropriate tools for detection of problematic areas. The most appropriate approach is designing of experiment with a view to the subsequent simple implementation of the measured data into numerical simulations software and carefully choosing a measuring method of the monitored physical quantities. The thesis deals with phenomenon of condensation in headlamps, which has a negative effect on the light distribution and their life expectancy. Due to this experimental defog methodology was developed based on evaporation of a specified amount of water into the headlamp and then condensation on the inside surface of the headlamp lens. Pictures are taken during the measurements and the fogged and defogged areas are automatically detected. The results from experiments are used to adjust and verify a numerical model. The next part is devoted to the thermal load of the headlamp components which are mostly heated by waste heat from light sources. This phenomena depends mainly on the type of source, emissivity and thermal conductivity. A methodology of temperature measurement, thermal conductivity measurement, non-stationary method for emissivity determination and spectral characterization of thermal source based on their thermal fluxes to the surroundings has been developed.
|
|
|
Study of reflectance of materials for construction surface treatment
Rauchfussová, Karolína ; Šot, František (referee) ; Šťastník, Stanislav (advisor)
Presented work deals with the study of properties of the progressive heat-reflecting foil thermal insulating materials. The work describes the transport mechanism of thermal energy through the structure of heat-reflecting materials, physical properties are compared with conventional thermal insulating materials. It is also shown here the main applications of these materials are in the field of low-energy and passive houses, especially in terms of the optimal method of incorporating in the building. The practical part is devoted to measuring of reflectance was made and then the measuring device HOT BOX was assembled.
|
|
| |
|
|
Measurement of thermal field in electric machines
Dostálek, Martin ; Vítek, Ondřej (referee) ; Janda, Marcel (advisor)
Diagnosis temperature is one of the most important disciplines. We meet it in everyday life, but it is very important for all sectors of industry. This is a measurement providing an immediate state of the measured object. Contact measurement of different temperature sensors and contactless measurement using thermal imagers. The important part is the measurement of temperature rise of induction motor. Part of the work deals with losses in the electric motor. These losses are converted into heat, which affects from various parts of the machine. Correct identification of the temperature field is important in helping to design the cooling system of the instrument. Virtually the data obtained are compared with theoretical data. We will capture part of the device and realize thermal simulations in a suitable simulation program. We propose modifying the cooling machine and the resulting data from the simulation compares.
|
guest ::
