|
In an Apartment in a small town, Mikulov
Nekolná, Alena ; Sedláček, Jan (referee) ; Hora, Jan (advisor)
The city's center is being exhausted at the expense of tourists and their earnings in Mikulov. More than residential houses build guest houses and other accommodation, classical housing is then set aside on the housing estate. Gradually, this phenomenon is signed on the quality of the city as a whole. It is also associated with gentrification, which is not always negative in the beginning, rather the opposite, but over time it can destroy the value of space. The oncept that my proposal is directed to is called Bilateral. It stems from the complexity of the non-orthogonal parcel, which is so characteristic of Mikulov. Just opening up the two streets leads to linking these two different places. Do not stack matter on one side of the street line, but use both as a functionally connected whole. Matter that does not turn back. An important motive is to fill a street break. Single-story building is out of scale. Follow the street line, lead it as a communication with the surroundings. Surroundings are also subject to a scale that divides the massive mass in the neighborhood of Comenius Street. Part of the mass descends to the lower street, the higher the mass prepares, the lower the gesture of the receding wall involved in the events. There is a street interior dedicated to a bakery and an open kitchen belonging to the restaurant with access from Husova Street. The restaurant is a bile hall accessible to all. The patio in the middle of the disposition connects the inhabitants and creates a community.
|
|
To Dvur Kralove by train - Transfer Terminal in Dvur Kralove nad Labem
Černá, Tereza ; Sedláček, Jan (referee) ; Ponešová, Barbora (advisor)
During the design process, I used the approaches of individual transport and pedestrian facilities to the plot. When analyzing pedestrian access, it became clear that the parcel can be taken from almost all directions, so the orientation of the terminal is not clearly predetermined. In connection with a diverse surrounding area that at present does not offer any attractive surrounding scene, I decided to turn the orientation towards the center to create a yard that will link individual transport sites, allow access from all corners of the parcel, and create a central area for visitors of terminal.
|
|
Computer design of the small CATV
Sedláček, Jan ; Slanina, Martin (referee) ; Říčný, Václav (advisor)
Main task of this bachelor’s thesis is to create an interactive automatic programme for designing circuits of individual or small common television aerial. The first part of this document describes main conceptions distribution of television signals, parameters of coaxial cable and also some kinds of signals distortion. There are described some important mathematics formulas used for calculation of coaxial cable attenuation and carrier to noise distance important for computing function of programme. The second part describes a procedure of designing of television cable circuit of individual or small common television aerial and includes prototypal calculation of two real circuits and its comparison with results of computer calculation by which correct function of programme is verified. A part of this document is also made by detailed description of programme and its functions. Source code of created programme is included in the end of this document.
|
|
A Business Plan of a Selected Company
Sedláček, Jan ; Cupal,, Martin (referee) ; Škapa, Stanislav (advisor)
Tato diplomová práce je zaměřena na vytvoření podnikatelského plánu nově založené firmy v oblasti podnikání znalectví, autorizovaného inspektora, inženýrské činnosti a BOZP a PO. V práci je obsaženo shrnutí teoretických poznatků k problematice řízení malého podniku, podnikání ve službách a tvorbě podnikatelského plánu. Navržený podnikatelský plán obsahuje interní a externí analýzy a konkrétní podnikatelský plán pro budoucí směřování firmy.
|
|
The MEMS sensors usability for position detection
Bobalík, Lukáš ; Sedláček, Jiří (referee) ; Žák, Jaromír (advisor)
Within this Master’s thesis, design and construction of a strapdown inertial navigation system based on MEMS sensors is described. The thesis includes theoretic analysis of physics behind determining the position of an object based on the object’s aceleration and changes in the object’s orientation in space. Included is also an overview of mathematical methods related to the position calculation.
|
|
Communication Mix of Travel Agency
Zlámal, Tomáš ; Sedláček, Jan (referee) ; Mráček, Pavel (advisor)
This bachelor thesis is focused on analysis of current state of travel agency´s communication mix, where on the basis of gained results from the analysis and with help of marketing research, which is conducted through a questionnaire survey, are suggested such recommendation, which will lead to improvement of current communication mix and subsequently to raise awareness about travel agency, bigger competitiveness and increasing of sales.
|
|
Adaptive frequency filter
Dolák, Jan ; Murina, Milan (referee) ; Sedláček, Jiří (advisor)
This thesis deals with passive and active frequency filters and their realization. The mail goal of my thesis was to design, simulate and realize adaptive frequency filter with the possibility of alternating it's parameters. The designed filter should be an active band stop filter of fourth kind with the possibility of alternating it's resonance frequence f0 and it's coefficient of quality Q. At the beggining it was needed to study the theory of frequency filters, types of frequency filters, which are often used in praxis, their properties and ways of their realizations. Use of active filters with operational amplifiers was optimal possibility of their realization. Because of there was given them the biggest attention in this part of the thesis. Then it was searched the most acceptable solution of required band stop filter, witch would have the best properties. Digital potentiometers operated by microcontroller were chosen for setting different values of various parameters. Designed circuits were realized after the decision and adaptation of optimal wirings and then the programme for operating of microcontroller and digital potentiometers was configured. By this way designed circuits were experimentally measured.
|
|
The Proposal of Small Company Development
Veselý, Tomáš ; Sedláček, Jaroslav (referee) ; Koráb, Vojtěch (advisor)
This master’s thesis gives a development proposal for XYZ, s.r.o. The line of business of this firm is mainly a passenger transportation service by client’s own vehicle. The thesis contains a theoretical review of running a small business, providing a customer service and making a business plan. The development proposal itself provides a highly professional analysis of up to date status of the firm and gives a specific business development programme for the company. Implementation of the proposal will ensure a future growth and also the firm’s profit will increase.
|
| |
|
Ultrasonic distance measurement
Giemza, Michal ; Žák, Jaromír (referee) ; Sedláček, Jiří (advisor)
This thesis describes the design and realization of an ultrasonic distance meter. Is discussed about the principle of distance measurement using ultrasound and all physics laws, that occur during the measurement. It was selected the most appropriate measurement method, was also discussed about different types of ultrasonic transducers and was selected an appropriate converter for the specified task. The following part describes all function parts of the meter together with the processing of the detected ultrasonic signal. Next part is focused on the realization of the meter and programming, including the control of the graphical display and communication over the USB bus. The last part deals with the measurement with the completed meter to verify the functionality and the right choice of measurement method and circuit solution.
|