|
|
Meassuring system for building constructions
Vladař, Martin ; Franek, Lešek (referee) ; Bradáč, Zdeněk (advisor)
This thesis deals with the measurement of physical quantities in building using decentralized system for data collecting. The system consists of Raspberry Pi as a master device of the system. There are three branches connected to this master device. Each branch consists of up to 32 modules for data-concentration from sensors of physical quantities. The Raspberry Pi has implemented web interface for displaying measured values and system administration.
|
|
|
Traffic monitoring using Raspberry PI
Zacpal, Michal ; Richter, Miloslav (referee) ; Honec, Peter (advisor)
This thesis describes the design and subsequent implementation of a unit for traffic monitoring using Raspberry PI. First section provides a quick overview of assistance systems, which use a road lane detection techniques. Next there is a description of two diferent methods for road lane detection. Follow the description of monitoring scene. Then the work describe the practical part including the design and realization of supporting electronics, selecting of each components, including the modifying of cameras, mechanical design and creating of unit. Another section is about selection and installation of appropriate software components necessary for running of the unit and the selection of development tools for creating user application. After description of graphical user interafce, there is a description of road lanes detection algorithm. At the end of the thesis is summarized a reliability of unit in real traffic situation. At the appendix there are technical drawings, describing the unit.
|
|
|
Hardware and software of a smart home appliance
Blaha, Vít ; Kaczmarczyk, Václav (referee) ; Fiedler, Petr (advisor)
Nowadays, the interest in smart appliances, which enable consumption reduction or consumption shifting approach, grows up. Such appliances can react to actual situation in the distributional network. From the energy distributor point of view, the activity of these appliances brings improvement of stability in the distribution network, while for the end customer there is possibility of the saving money. This thesis describes a transformation of standard fridge to smart fridge controlled by microcomputer Raspberry Pi. The smart fridge can communicate with supervisor system and according to its instructions change its behavior (temperature set point). The appliance can be manually controlled by a group of buttons, while its state can be visualized on the alphanumeric display. Last but not least way to control the appliance is through a web interface. The thesis also describes design of printed circuit board (PCB), which is designed for connection of all necessary sensors and actuators to Raspberry Pi. Software equipment is designed in the C++ program language.
|
|
|
Matrix display
Gábik, Matej ; Šťastný, Ladislav (referee) ; Bradáč, Zdeněk (advisor)
The aim of this thesis is to implement autonomous information portal using matrix display BUSE BS210. The first part deals with the theoretical problem-solving and management options display. The second part is dedicated to the development of necessary hardware and the last part is the software described herein microcontroller and microcomputer Raspberry Pi.
|
|
|
Aerospace Industry Bus ARINC429 Low Cost Communication Interface
Michna, Jakub ; Mišík, Štefan (referee) ; Bradáč, Zdeněk (advisor)
The aim of this work was to create a communication interface of standard ARINC Aerospace Industry Bus 429. The work has slightly outlined existing solutions, from which it can draw inspiration. Further analysis was performed, analysis of ARINC 429 bus, analysis of Raspberry Pi platform on which the solution will be built, and analysis of selected bus controller HI-3593. After that concept was created, based on concept was created the scheme contains circuitry HI-3593. On the basis of the scheme was created DPS. Next was created software for DPS. In the end of this work was tested abilities to receive and send messages on the bus ARINC 429.
|
|
| |
|
|
Laser Projector
Svoboda, Pavel ; Burian, František (referee) ; Žalud, Luděk (advisor)
The aim of this thesis is to create a system, which draws the graphics with the help of a set laser project and eventually is able to synthetize several coloured rays and thus realise a multicolour drawing. The whole system is controlled by a Raspberry PI microcomputer and the data is sent to it from a PC via an Ethernet cable. The transmission of the projector device was identified and possible ways of improving the device were suggested. The results of this thesis allow creation of a multi-coloured vector picture, transferring it into the device and depiction on the project desktop. The whole device can therefore be used for example for the purpose of a presentation.
|
|
|
Device for personal identification and data sharing
Severa, Pavel ; Klusoň, Vladimír (referee) ; Friedl, Martin (advisor)
Result of my work is make device for logging visitors or game players. I arranged to make two devices, web pages and communication protocol between server and devices. Graphical device will have graphical display with HDMI input, Raspberry main board, NFC reader, camera and GSM module. Second device will have microcontroler ATMEGA644, NFC reader, 2-4 line text display and optional GSM module. Both device will communicate with server via GPRS. Server can change configuration of devices and colecting logs
|
|
|
Video doorphone
Horyna, Miroslav ; Macháň, Ladislav (referee) ; Šteffan, Pavel (advisor)
This thesis deals with door video phone on the platform Raspberry Pi. There is described the platform Raspberry Pi, Raspberry Pi Camera module, operating systems for Raspberry Pi and described installing and configuring the software. Next is described the concept and description of programs created for door video phone and design of additional modules.
|
|
|
Stability and autopilot system for airplane RC model
Čamaj, Peter ; Republic), (SAAB Technologies Czech (referee) ; Šebesta, Jiří (advisor)
The master thesis deals with design and realization of stabilizing and autopilot system, which is used in radio controlled model planes. The thesis contains a proposal of hardware platform, which is able to control the plane model based on data measured from a sensor system. Moreover, this thesis describes a software implementation of individual modules, which is measured the onboard values. The basic principles of stabilization and autonomous flight control are also summarized. In conclusion, the system is subjected to flight tests.
|
guest ::
