|
|
Steel load-bearing structure of a car showroom
Junek, Lumír ; Pešek, Ondřej (referee) ; Balázs, Ivan (advisor)
THE AIM OF THE WORK IS THE PROPOSAL OF A CARRIAGE STEEL STRUCTURE OF AUTOSALON. MAXIMUM DIMENSIONAL DIMENSIONS ARE 48.0 M X 24.0 M. THE TOTAL HEIGHT OF THE STRUCTURE IS 9.125 M. THE MAIN STRUCTURE CONSTRUES A DRAWING SHAPE FRAME WHICH IS STRAPED ON THE COLUMNS. ROOF TREATMENT IS CONSTRUCTED WITH SENDING PANELS. PRIVATE AREAS PROTECT
|
|
|
Car Showroom
Schusterová, Soňa ; Brzoň, Roman (referee) ; Bečkovská, Tereza (advisor)
This thesis deals with the elaboration of construction project documentation of newly built car showroom with authorized service station and financial centre located in the city of Kroměříž. The building was designed as self-standing with one underground and two above ground floors and is conceptually divided into three tracts – car showroom itself, technical facilities and authorized service station. There are underground garages, storage of new cars and technical rooms situated in the basement. Showroom, sanitary facilities and operational premises, separate client services such as reception, new car selling desk, service station desk, spare parts selling desk or reception technician desk are situated on the ground floor. Also there are storage of spare parts, car wash with utility room and facilities for employees of service station. Service station itself and storage of tires are adjacent to these areas. First floor is only partial and includes financial department, offices and directorate. Construction system of this building is designed as reinforced concrete skeleton with cross-reinforced boards. The skeleton is partially blocked by porous concrete blocks 300 mm thick with thermal insulation of mineral wool 200 mm thick (main part) and 160 mm thick (service station, storage). The facade is ventilated and glazed facade system is used.
|
|
|
Prefabricated construction od car-showroom
Wolf, Jiří ; Švaříčková, Ivana (referee) ; Zlámal, Martin (advisor)
Aim of the final thesis is to create loadbearing prefabricated structure of building, which serve like office building and area for car-showroom, and creating static assessment of main supporting parts. For those parts will make drawing documentation of reinforcement and shapes. Computational 3D model for evaluation of internal forces is realized in Dlubal RFEM 5.07 software. For better check and comparison were create 2D spatial bar models of selected frames.
|
|
|
Car Showroom
Smrčka, Václav ; Buchta, Stanislav (referee) ; Bajer, Miroslav (advisor)
The aim of the thesis is to design and appreciation steel load-bearing structure of motor show. The object is situated in Brno. The Structure consist of tubes and rolling sections. The breadth of construction is 36,5m, lenght 42m and height in the heihest point is 13,2m. The structrure is consists of three parts. Show room, offices and workshop. The height of show room is 20m, offices 8,5m and workshop 8m. The show room consist of arched truss girder. The distance of each cross links is 6 m. Structural design were perfomered by Scia Engineer 2017 and hand computation.
|
|
|
Car dealership
Mošaťová, Kristína ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
This Diploma thesis deals with the solution of project documentation for the new Suzuki car showroom building. The proposed object is situated in region of Nitra in Topolcany district, located in suburb part of Topolcany town. The car showroom is designed as a building consisting from the car shop - showroom and the services for Suzuki automobiles. The car shop - showroom is designed as the operation for car sales and the administration part on the second floor. This part of the building is covered with warm flat roof. The second part of the object - Car service is a one-floor building covered with wood, truss purlin constructure in the shape of a saddle roof and in inclination of 9 degrees. The supporting construction of the building consist from cast-in-place reinforced concrete frame in the showroom part and from masonry system Ytong system in other parts of the building.
|
|
|
The Showroom Structure in Jihlava
Stloukal, Radim ; Sýkora, Karel (referee) ; Šmak, Milan (advisor)
The subject of this thesis is a structural design of a car showroom in municipality Jihlava. For this purpose two different concepts were developed. The main bearing system of the first consists of steel truss girder supported by single profile steel columns. The second idea, a structure with axial ground area 36,0 x 18,5-23,5 m , is made from glue laminated timber. The second mentioned concept was chosen for detailed calculation and documentation. The structure was modelled by 1D member while using Scia Engineer. Results obtained from the computer analysis were taken and main strutctural members were check by manual calculation.
|
|
|
Autosalon
Balúch, Tomáš ; Pospíšil, Jaroslav (referee) ; Pěnčík, Jan (advisor)
This master's thesis focuses on design and elaboration of documentation for construction of a Car Showroom. The building is divided to two functional parts. The building is to be situated on plot number 1333/21, cadastre unit: Bohunice. The building is to be located on an undeveloped plot in possesion of the investor. The parking lots are connected to a local road. All substantial infrastructures are located nearby the plot. The proposition and the design of the building have respect for both commune plan and current buildings. The documentation is elaborated with regard to the contemporary Czech legislative and standards. The project designs the building, which is divided in two functional parts: SO 01 & SO 02, both operationally and visually connected. Contructions of objects are structurally independent. The first object includes exhibition hall with capacity of 8 exhibited cars. There is also to be located the administrative part, waiting rooms for customers, facilities for employees and the warehouse. The second object includes car repair shop. There are also to be located facilities for employees of the service, workshop, room for a car handover, hand car wash and an utility room. Construction is designed as a reinforced concrete columnar structural system with prefabricated single footings, self-supporting foundation slab and reinforced concrete ceiling slab with integrated girders above first floor of the object SO 01. The roofs of the building are designed as a flat roofs and the support constructions are made of steel. Planned dimensions of autosalon are 41x18 metres. As a cladding of the first object is used the lightweight glass cladding. For masonry walls are used the 250 mm thick ceramic blocks, mineral insulation and ventilated external facade cladding with use of fiber-cement boards. Planned dimensions of car repair shop are 31x28 metres. As a cladding of the second object are used the sandwich panels with foam core made of PIR.
|
|
|
The load bearing steel building structure of the car showroom
Hubáček, Ondřej ; Karmazínová, Marcela (referee) ; Melcher, Jindřich (advisor)
This work contains a proposal supporting steel structure of the single- industrial buildings intended for parking motor show / exhibition cars in Brno. Building plan dimensions are 20 x 36 m. The main structure is defined by a planar cross-linked. Transverse bond is formed trusses, connected by purlins. Trusses are on both sides of the structure hinged to the fixed columns. The main beam is made up of trusses with an installation height of 1,5 m at midspan. Distance crosslinks is 6 m. Spatial rigidity is ensured by a system of longitudinal transverse stiffeners. Steel truss rods are made of rolled profiles are pillars of HEB profiles and purlins are designed from rolled profiles I. The design is carried out according to standards EN. Used material bearing elements is steel S 235 (regular steel).
|
|
|
The Steel Structure of Car Showroom
Buchta, Vojtěch ; Buchta, Stanislav (referee) ; Hron, Lukáš (advisor)
The task of the thesis was to design a draft and a review of car’s showroom supporting structure. The object is located in the city of Hradec Králové. Floor plan has a size of 30 x 15 m, the height of the object is 7 m at the highest point. The mono-pitched roof is formed by two parts on the same slope 3.81 °. Material of all components is steel S235. All calculations were performed in accordance with valid standards. The structure consists of a load-bearing columns fixed to the ground, the truss girders are designed of hollow cross-sections, pin-suported by the columns. The purlins are pin supported by upper chords of a truss girder, with the lower and upper edges flushing. Purlins support the roof made of roof-panels by Kingspan, thickness 160 mm. Wall casing the technical parts of the object is formed also by system panels by Kingspan. The cladding of the sales area is made of glass panels by Reynaers.
|
|
|
Business Plan – Car Showroom
Machala, Jan ; Mikulka, Vít (referee) ; Luňáček, Jiří (advisor)
This bachelor´s thesis deals with the establishment and successful management Car showroom. In this work, I will discuss all aspects that related to this problem. In the first part, I will discuss the theoretical bases of my work and I will define basic terms like business, businessman, etc. In the second part I will build a real business plan for opening and operation of the motor show in Brno.
|
guest ::
