|
|
Trailer for EURO palette
Michal, Tomáš ; Pokorný, Přemysl (referee) ; Kašpárek, Jaroslav (advisor)
Project detaily decsribe design of trailer construction which utilized gravitational roller way. Firstly we are going to focuse at determination of main proportion and later on at the construction of each single part ( frame, roller way and rear mechanism). All parts of the trailer have their own technological plan and project also includes 3D models of them. Obvious part of the project documentation is also functional counting where is determined named velocity euro-palett slide on roller way and fixity counting at once.
|
|
|
Impact of the covid-19 pandemic on air passenger transport
EMMER, Matěj
This thesis examines the impact of the covid-19 pandemic on air passenger transport within the air transport network structures. It also focuses on examining the relationships between different categories of the global airport network during the pandemic and regional differences in air passenger traffic around the world. The results of the thesis are presented by analysing data for the period before and after the start of the covid-19 pandemic. The data on which the thesis is based are compiled from several global aviation organisations such as ICAO - International Civil Aviation Organisation or IATA - International Air Transport Association or from publicly available annual reports of individual airports around the world. The conclusions of the thesis point to an enormous intervention in air passenger transport that was unprecedented until then.
|
|
|
Pneumobile dynamometer design
Fritscher, Matyáš ; Kubík, Michal (referee) ; Jeniš, Filip (advisor)
This bachelor thesis concerns design of measuring station with a dynamometer for a racing pneumobile developed by a student team. The aim of this device is to simplify the process of tuning of the vehicle and to make it more precise. At the beginning of the work, there is a research of current commercial solutions of dynamometer stations. Then, while choosing a suitable brake, there is an evaluation of the possibility of repurposing an old brake, given by the university for this project. After verifying that it meets the necessary requirements, there are several concept solutions presented. For the selected concept, with a specific design for this vehicle, there is a complete design solution including safety analysis of selected nodes.
|
|
|
Formula Car Front Wheel Carrier Simulation Analysis
Gach, Jakub ; Porteš, Petr (referee) ; Ramík, Pavel (advisor)
This Master’s thesis is focused on the suspension of the front wheel, more accurately for specific part, upright. It describes the basic requirements for construction, distribution of uprights, their method of production and types of materials used. It briefly mentions topology optimization and its two optimization methods. Also deals with vehicle dynamics for driving conditions – standing vehicle, braking and cornering. In the practical part, the work is focused on determining the load effects on the upright during the aforementioned driving conditions using MBS software. At the end of the work, FEM stress and deformation analyses are performed for loading on the wheel side and on the suspension side, which are then compared and evaluated.
|
|
|
Sinumerik 840D sl. tools for programming of CNC machines
Mešina, Matej ; Kalivoda, Milan (referee) ; Polzer, Aleš (advisor)
The thesis deals with the design and production technology of the front hub for a mountain bike. The research focuses primarily on the various control systems of CNC machining apparatuses. The second chapter is devoted to the elemental differentiation of hubs, the concept of personal design of the hub, and the characteristics of the materials for its production and its verification using the FEM analysis. The third chapter deals with the design of a workpiece, instruments and the manufacturing process itself. The design of an NC program constructed in the SinuTrain 4.8. software is dealt with in the fourth chapter. The last part is devoted to the technical and economic evaluation of the proposed solution.
|
|
|
Engineering design of the hydraulic press for bearings for bikes
Vichr, Tomáš ; Brandejs, Jan (referee) ; Klapka, Milan (advisor)
This bachelor thesis concerns design of a bearing replacement device in the motorcycles wheels. The aim was to develop an affordable and reliable home appliance. In general research are defined the imperfections of commonly available devices on the market. Based on that are designed three conceptual proposals as a solution of these problems. The most suitable one is chosen and the critical crucial points are verified as well as the production price.
|
|
|
Vehicle Wheel Hubs Design
Mohyla, Daniel ; Janoušek, Michal (referee) ; Ramík, Pavel (advisor)
This diploma thesis deals with design of a wheel hub assembly for a Formula Student vehicle. First part of this thesis is dedicated as an introduction to the Formula Student competition and serves as a summary of design solutions for wheel hubs with a focus on open wheel vehicles. Second part deals with description of a problem and summarizes necessary knowledge and information to solve given problem. Third part is devoted to CAD modelling in software PTC Creo parametric. This model is then analysed using finite element method. Last part of this thesis is a discussion about achieved results and discussion about further potential improvements is carried out.
|
|
|
Riverside House
Kučavík, Patrik ; Kopec, Jakub (referee) ; Vítek, Jiří (advisor)
Business Moves East is a place to work and relax not only for a direct residents and residents of wider London but also to people from all over the world. This is an opportunity for international businesses and entrepreneurs to present themselves in a strategic location. The largest building is the exhibition Expo hall including also other relevant functions. Another object is a smaller exhibition hall, that, in addition to exhibitions, allows organizing concerts, special events, conferences and other cultural events. This is followed by a cell-based building that serves a long-term presentation of companies and individuals in the form of showrooms and open studios. Shared offices in the southern part of the premises are primarily designed for people using airport services and residents who are tempted to work in a dynamic campus environment. The whole area sits on the market.
|
|
|
Jaroslavice – place in the landscape
Dräxlerová, Laura ; Ryšavá, Hana (referee) ; Foretník, Jan (advisor)
The project of Cultural hub for Jaroslavice village is based on the rich history of this small borderline area. It is aiming on improving the current state of the region by connecting it into the cultural net and coordinating creative project within the area. It focuses on attracting foreing artists and connecting them with local community as well as coworking with art schools. It provides workshops and courses for local people and targets children and young people for developing their relationship to culture and creativity, The most attractive part of the project is the „Laboratory of Light“. It is composed from 8 different light situations for artist to train their skills.
|
|
|
LIBRARY plus - Multiporpouse Building with Library
Ambrosová, Katarína ; Ponešová, Barbora (referee) ; Kristek, Jan (advisor)
Through the proposal, an idea of hybridised space for developement of two types of human knowledge – the skills and the wisdom, learnable through the language, is brought to life. Main building is proposed as an essential facility for Brno technological community, which is set to a symbiosis with technical library, where the books become more of a cullis, a scenery, than a main point of gaining information. Everything takes place on the same physical and virtual data platform. Architectonical solution is based on the principles of double staircase, which allows to coexist two separated functions, as well as they can be connected when needed, for example during events as workshops, lectures and so on. A centre of share knowledge is made.
|
guest ::
