National Repository of Grey Literature 23,070 records found  previous11 - 20nextend  jump to record: Search took 0.56 seconds. 

Analysis of the marketing activities in nonprofit organization INEX-SDA
Müllerová, Michaela ; Procházková, Markéta (advisor) ; Polcar, Jakub (referee)
The aim of this thesis is to analyze marketing activities of nonprofit organization INEX-SDA and make recommendations relating to the marketing mix which would increase awareness of this foundation and also increase voluntary help from the public. The thesis is divided into two parts. First part deals with theoretical definition of marketing and its specifics related to the nonprofit sector. The theoretical part is followed by a practical part in which organization INEX-SDA and the individual elements of the marketing mix are specified. In this part there was also done marketing research. With the analysis of marketing activities information is obtained which together with the theoretical knowledge leads to recommendations relating to the marketing activities of this non-profit organization. The thesis ends with an overall summary.

Optimalization of material flow in automotive industry
Kolář, Tomáš ; Jirsák, Petr (advisor) ; Vinš, Marek (referee)
This master thesis is focussed on optimalization of material flow in an automotive company. First part introduce theoretical background. Automotive industry and its actual trends on global markets. Follows short introduction of the company where project of this thesis was executed. Main theoretical part describes concept of lean management, its tools in practical examples, but it is also focussed on philosophical approach to the work and mindset of the company. Follows the aplication part based on theoretical background. The whole project of this master thesis is focussed on specific area called PC store. At first this area is showed in context of overall material flow. Shortly there are introduced processes and areas where full material packaging flows. Follows deeper analysis and optimalization of PC store itself. There are three approaches of stock and lead time reduction applied. Last part shows the comparison of initial and future state including performed changes.

Modelling, parameter estimation, optimisation and control of transport and reaction processes in bioreactors.
ŠTUMBAUER, Václav
With the significant potential of microalgae as a major biofuel source of the future, a considerable scientific attention is attracted towards the field of biotechnology and bioprocess engineering. Nevertheless the current photobioreactor (PBR) design methods are still too empirical. With this work I would like to promote the idea of designing a production system, such as a PBR, completely \emph{in silico}, thus allowing for the in silico optimization and optimal control determination. The thesis deals with the PBR modeling and simulation. It addresses two crucial issues in the current state-of-the-art PBR modeling. The first issue relevant to the deficiency of the currently available models - the incorrect or insufficient treatment of either the transport process modeling, the reaction modeling or the coupling between these two models. A correct treatment of both the transport and the reaction phenomena is proposed in the thesis - in the form of a unified modeling framework consisting of three interconnected parts - (i) the state system, (ii) the fluid-dynamic model and (iii) optimal control determination. The proposed model structure allows prediction of the PBR performance with respect to the modelled PBR size, geometry, operating conditions or a particular microalgae strain. The proposed unified modeling approach is applied to the case of the Couette-Taylor photobioreactor (CTBR) where it is used for the optimal control solution. The PBR represents a complex multiscale problem and especially in the case of the production scale systems, the associated computational costs are paramount. This is the second crucial issue addressed in the thesis. With respect to the computational complexity, the fluid dynamics simulation is the most costly part of the PBR simulation. To model the fluid flow with the classical CFD (Computational Fluid Dynamics) methods inside a production scale PBR leads to an enormous grid size. This usually requires a parallel implementation of the solver but in the parallelization of the classical methods lies another relevant issue - that of the amount of data the individual nodes must interchange with each other. The thesis addresses the performance relevant issues by proposing and evaluation alternative approaches to the fluid flow simulation. These approaches are more suitable to the parallel implementation than the classical methods because of their rather local character in comparison to the classical methods - namely the Lattice Boltzmann Method (LBM) for fluid flow, which is the primary focus of the thesis in this regard and alternatively also the discrete random walk based method (DRW). As the outcome of the thesis I have developed and validated a new Lagrangian general modeling approach to the transport and reaction processes in PBR - a framework based on the Lattice Boltzmann method (LBM) and the model of the Photosynthetic Factory (PSF) that models correctly the transport and reaction processes and their coupling. Further I have implemented a software prototype based on the proposed modeling approach and validated this prototype on the case of the Coutte-Taylor PBR. I have also demonstrated that the modeling approach has a significant potential from the computational costs point of view by implementing and validating the software prototype on the parallel architecture of CUDA (Compute Unified Device Architecture). The current parallel implementation is approximately 20 times faster than the unparallized one and decreases thus significantly the iteration cycle of the PBR design process.

Global Economy Outlook - November 2016
Česká národní banka
The November issue of Global Economic Outlook presents the regular monthly overview of recent and expected developments in selected territories, focusing on key economic variables: inflation, GDP growth, leading indicators, interest rates, exchange rates and commodity prices. In this issue, we also focus on the relationship between the Brent crude oil price and the US dollar exchange rate over the last ten years. The results show that the inverse relationship between the Brent price and the nominal effective exchange rate of the dollar still applies, helping dampen fluctuations in the dollar price of oil in “non-dollar” economies.
Fulltext: Download fulltextPDF; Download fulltextPDF

The methodology for the selection of appropriate restoration work
Machačko, Luboš ; Gláser, Petr ; Bartoš, L. ; Bayer, K. ; Ďoubal, J. ; Justa, P. ; Vojtěchovský, J. ; Krhánková, K. ; Vácha, Z. ; Wichterlová, Z.
The aim of this methodology is to present a recommended procedure which leads to selection of optimal restoration intervention. Selection of the appropriate procedure and method of restoration and reconstruction is the primary prerequisite for the quality and efficiency of future work.
Fulltext: content.csg - Download fulltextPDF
Plný tet: 0457228_2015_Glaser_Machacko_Metodika_pro_vyber_vhodneho_restauratorskeho_zasahu - Download fulltextPDF

International trade in a Kraft paper intended for contact with food
Vodičková, Martina ; Regnerová, Olga (advisor) ; Zdeněk, Zdeněk (referee)
The master´s thesis deals with international trade with packaging paper intended for contact with food. The theoretical part concentrates on packaging types and functions, the history of the paper industry in the Czech Republic and the world market with packaging paper intended for contact with food. The legislation of each country is very important for this type of business, therefore the legislation in selected countries is briefly described, including internationally regarded certification. In the practical part the author analyses the sales of the company Mondi Štětí a.s. in the years from 2010 to 2012 and defines countries with the highest purchasing of packaging paper for end-use with food contact. The third part is devoted to evaluation of the market and the way the company trades on the market. There are contained proposals for optimization leading to the acceleration of trade in this commodity

Managerial skills
Červinková, Barbora ; Kříž, Josef (advisor) ; Zdeněk, Zdeněk (referee)
The theoretical basis of this thesis explains the terms closely associated with the management and managerial skills. Introductory part relates to approach the concept itself and the executive management, we are further broken down managerial functions, which are continuously illuminates to describe other skills, such as communication, goal setting, skills and coaching. The main point is to approach the concepts of soft and hard skills that managers should possess, or which should in the course of his practice to learn. Only by careful control of both of these groups of skills can lead to good organization. For a clearer explanation of the managerial skills included graphic view, which approximates the distribution of skills. In the second part, a practical part, described the situation with the existing skills of managers in the selected company. Thanks to the questionnaire, it is possible to measure the current level of acquired skills of managers at three levels and can be evaluated, what is the interest of improving individual skills, or whether managers feel sufficiently qualified for their job positions.

Freezing technology of bull sperm in relation to its survivability and fertilization ability
Doležalová, Martina ; Stádník, Luděk (advisor) ; Jiří, Jiří (referee)
The aim of optimalization the insemination doses production is to provide the highest fertilization ability of spermatozoa during the demanding proces of processing fresh semen and its subsequent cryopreservation. Temperature changes causes spermatozoa damage during the cooling and freezing. Spermatozoa is exposed to cold shock and many others limiting factors, which leads to cell death and therefore to decline of fertilization ability of thawed insemination doses. For increasing spermatozoa resistance, exactly the plasma membrane resistance against cold shock was fraction of egg yolk LDL cholesterol (low density lipoprotein) at various concentrations into the comercially produced diluents added. It is believed that LDL acts possitively to plasma membrane and helps to maintain the fertilization ability of spermatozoa after thawing. Following step in the proces of insemination doses production is slow cooling of diluted semen and equilibration, when the straws are store at cooling box for 30 minutes to 240 hours. This period is necessary to penetrate of certain diluent components into the spermatazoa also maintain the balance between their intracellular and extracellular concentration. Also important is subsequent freezing temperature gradient of insemination doses. The most suitable freezing method is based on computer controlled temperature decline in freezing chamber which allows the precise control of ice crystals formation that could tear and kill the cell. During 2012 to 2016 was repeatedly collected semen from the group of breeding bulls (n = 27, Holstein and Czech Fleckvieh breed) at AI centre. Semen which fulfill the standard entrance conditions in first step was evenly into several parts divided. For dilution the three types of comercially diluents AndroMed, Bioxcell and Triladyl with and without LDL addition were used. Into the diluents AndroMed and Bioxcell the concentration of LDL 4 %, 6 % and 8% into the dilent Triladyl 6 %, 8 % and 10 % was added. Diluted semen was filled into the glass capillares with volume 0,1 ml and temperature +4 °C. Subsequently the sample was placed to cold bath (0°C) for 10 minutes. Then the volume of capillare with physiological solution (37 °C) was mixed and for next 120 minutes was incubate. The effect of cold shock to proportion of live spermatozoa was evaluated by using Eosin and Nigrosine staining technique during heat test of spermatozoa survivability after spermatozoa heating and after 120 minutes of incubation. The more suitable semen diluents which provide the higher spermatozoa resistance against cold shock were AndroMed and Bioxcell. Together the possitive effect of LDL addition into the diluents to lower decrease of proportion of live spermatozoa during heat test was found (P<0.05). The most suitable LDL concentration which had a favorable influence at spermatozoa resistance against cold shock was 6 % in diluent Bioxcell. Values of the proportion of live sperm were higher at the beginning of the heat test (+1.31% to + 3.2%) and after 120 minute incubation (+5.82% to +8.41%) compared to other diluents with and without addition of LDL. In the next step the process of equilibration was optimized, is an important part of insemination doses production. The effect of the length of equilibration for subsequent fertilization ability of spermatozoa was evaluated using spermatozoa motility based of CASA and proportion of live spermatozoa after thawing and during heat survival test lasting 120 minutes (37 ° C). Suitable semen was diluted by comercially used diluent AndroMed based on soya lecithin, filled into the straws (0.25 ml), cooled and equilibrated in cooling box for 30, 120 and 240 minutes and freezed in programmable freezing box applying four types of freezing curves differing in temperature rate decline. There was used standard and by producer recommended 3. phase freezing curve, then 2. phase freezing curve, and 3. phase freezing curve with slower as well as rapid decline of temperature rate in freezing chamber, compared with standard freezing curve. The highest spermatozoa motility was found using 240 minutes of equilibration by +2.72% and +4.58% compared to other lengths of equilibration (P <0.05 to 0.01). The highest proportion of live spermatozoa was found using 120 minutes of equilibration (+6.87 % and +8.68 %). The highest average spermatozoa motility during heat test after thawing was achieved by using 2. phase freezing curve (from +2.97% to +10.37%, P <0.05), also in the proportion of live spermatozoa (from + 4.37% to +8.82%, P <0.01). When evaluating interaction between the length of equilibration and freezing curve (standard 3. phase and 2 . phase freezing curve), the highest average spermatozoa motility and proportion of live spermatozoa using 240 minutes of equilibration by both freezing curves was reached, there was no statistically significant differences. As well as, in all evaluated parts of this study the individual differences between ejaculate of bulls and within semen from one bull (P <0.05) as secondary effect were found. To maintain good fertilization ability of semen during cryopreservation is necessary to increase the spermatozoa resistance against cold shock using addition of correct concentration of LDL into the commercially used diluents AndroMed and Bioxcell. Subsequently the fertilization ability of insemination dose is influenced by cooling, the length of equilibration and freezing. The length of equilibration 120 minutes and more as well as gentle way of freezing according to freezing curve, which ensures a gradual decrease of temperature in freezing chamber provided the higher average spermatozoa motility and proportion of live spermatozoa.

Influence of meadow management on the migration behavior of selected species of butterflies
Bubová, Terezie ; Langrová, Iva (advisor) ; Farkač, Jan (referee)
Migrations are the key process and one of the basic biological features, which allow survival of endangered species in fragmented landscape. In the last decades, agriculture intensification, industry and urbanization caused that number of natural butterfly habitats has significantly decreased. The localities originally suitable for butterflies are currnetly converted to farmland or building plots. This PhD thesis aimed to find a compromise solution of meadow management, which should allow a commercial use and concurrently do not jeopardize the continued existence of endangered or threatened species. The main idea of this study was in the intentional emigration causing in the middle of flight period, which should lead into resettlement of the population to another (potentially more suitable) locality. Possibility of aimed manipulation with butterfly emigrations would be considered as a major breakthrough in their protection. The investigated species Phengaris nausithous (Bergsträsser, 1779) and Phengaris teleius (Bergsträsser, 1779) are both considered to be flagship species for protection of European butterflies at open meadows. This study is based on research, which was carried out in 2013-2015 at 17 patch in localities Dolní Labe, Czech Republic. In above mentioned years, one selected meadow was mowed in the middle of flight season and the emigrations were then monitored using mark-release-recapture method. Results of population and migration characteristics were calculated in MARK 8.1 software. Subsequently, the effect of mowing on emigration (comparison of emigrations from the meadow before and after mowing) was evaluated using Statistica 13. The hypotheses of this study were based on the assumption, that the loss of resources after well-timed mowing should increase the activity of adult butterflies. During the monitoring, number of emigrations was increased only in flight season 2015. Unfortunately, the statistical evaluation did not show significant effect of mowing on migrations. On the other hand, the hypothesis dealing with colonization of nearest meadows was confirmed. Effect of intentional emigration caused by management interventions was unfortunately not proved. However, we found out, that even though the population at one mowed meadow decreased clearly, the metapopulation size at the locality remained more or less stable. At investigated (mowed) meadow, there was observed a sharp decline of P. nausithous abundance. On the other hand, P. teleius population was only slightly reduced. It is therefore conceivable, that P. teleius are not as susceptible to innapropriate term of mowing. The results obtained in our research conclusively displayed no possible positive effect of mowing in the middle of flight season and a necessity of suitable management maintenance at localities inhabited by Phengaris butterflies.

Antioxidant, anti-proliferative and immunomodulatory effect of fruits, vegetables and mushrooms in vitro
Doskočil, Ivo ; Havlík, Jaroslav (advisor) ; Orsák, Matyáš (referee)
Recently there has been an increasing interest in discovering of new species of plants and mushrooms which have antioxidant or anti proliferative activity. The interest is caused by the fact that these species have medicinal and food utilization. These properties of plants and mushrooms can be used when dealing with many diseases which may be connected with oxidative stress (inflammatory bowel disease, cardiovascular disease, hypertension, and tumour disease, etc.). The thesis propounds characteristics of in vitro antioxidant and anti proliferative activity of 19 types of juices and 28 methanol extracts of fruits and vegetables, which are common parts of a diet. In the thesis there are also characteristics of 13 ethanol extracts of edible mushrooms of the order of Polypore (Popyporales). Antioxidant activity was quantifie by 2, 2 diphenyl 1 picrylhydrazyl (DPPH), oxygen radical absorbance capacity (ORAC), and inhibition of nitric oxide (NO) production. Cytotoxicity was measured by MTT (3 (4,5 dimethylthiazol 2 yl) 2,5 diphenyltetrazolium bromide. Immunomodulatory activity was determined by an assay of phagocytic activity of human neutrophil granulocytes. Further a total phenolic content (TPC) and total beta glucan content were investigated; these are considered to be the potentially active constituents participating in mentioned activities. From the obtained results it is evident that juices (TPC = 1603.2 mg GAE/L; ORAC = 438.5 umol TE/g) and a bilberry (Vaccinium myrtillus) fruit extract (ORAC 836.6 umol TE/g; DPPH = 404.6 umol TE/g) showed the highest antioxidant activity of all tested samples of fruits and vegetables. Capsicum (Capsicum L.) juices (TPC = 642.1 mg GAE/L; ORAC = 127.9 umol TE/g) and a radish (Raphanus sativus L.) extract (ORAC 724.5 umol TE/g; DPPH = 52.2 umol TE/g) also proved to have the high values of antioxidant activity. From the tested fruits and vegetables the following inhibited to produce a nitric oxide: onion (Allium cepa L) juices (lowered the NO production by 57%), tangerine juices (Citrus reticulata Blanco)(by 52%), broccoli (Brassica oleracea var. botrytis italic) extract (by 21%), and orange (Citrus sinensis Pers.) extract (by 10%). Concerning edible mushrooms, Lentinus tigrinus (Bull.) Fr. (TPC = 216.2 umol GAE/g of extract), Ganoderma lucidum (Curtis) P. Kras (TPC = 257.9 umol GAE/g of extract), and Royoporus badius (Pers.) A.B. De (TPC = 257.8 umol GAE/g of extract) presented the highest phenolic content. Sparassis crispa (Wulfen) Fr. (117.4 mg/g of extract) had the highest content of beta glucan. Substantial effect on phagocytic activity of granulocytes was noticed in connection with Neolentinus lepideus (Fr.) Redhead & Ginns, Polyporus squamosus (Huds.) Fr., and S. crispa. In connection with the latter of mentioned mushrooms, a moderate inhibitory effect towards HT 29 human colorectal adenocarcinoma cell line (IC50 = 107 ug/ml of extract) was noticed. The results indicate that the tested plants and mushrooms can be beneficial when reducing the negative effects of oxidative stress. The oxidative stress has been recognized as a contributing factor to a whole range of diseases and the reduction of the oxidative stress may lead to the decrease in the possibility of the diseases´ progression. The results show the possible favourable effects on the human health. When evaluating the results, the following fact should be taken into consideration; the in vitro tests and screenings are considered to be the first phase of systematic research of the effects and serve for the choice of respondents for further detailed studies.