|
X-ray Observation of the Loaded Silicate Composite
Vavřík, Daniel ; Fíla, Tomáš ; Jandejsek, Ivan ; Veselý, V.
An intensive internal material damage evolution precedes a failure in quasi-brittle materials. Not only the existence of damage but also its quantification and the geometry of the Fracture Process Zone have to be identified in order to validate approaches on both numerical modelling of quasi-brittle behaviour and experimental determination of fracture properties. Radiographic techniques and Digital Image Correlation method are very appropriate for analysing of the Fracture Process Zone evolution during specimen loading.
|
|
The status of women on the labour market in Czech Republic
Skopalíková, Anna ; Chytil, Zdeněk (advisor) ; Čermáková, Klára (referee)
The bachelor thesis addresses discrimination of women on the labour market in Czech Republic. Its aim is to verify hypothesises about the existence of lower mean wages of women and about the existence of discrimination of women on the labour market in Czech Republic. Oaxaca wage differential decomposition which is introduced in the theoretical part of the thesis confirmed the existence of wage differentials between the wages of men and women on the Czech labour market, in selected regions and in selected occupational fields. This confirms the hypothesis about lower mean wages of women. Oaxaca wage differentials decomposition also confirms that the wage gap can be explained in most cases up to 18 %. The second hypothesis is confirmed only partially. The discrimination of women probably exists on the labour market but it is not possible to confirm the size of it. The unexplained component of the wage gap (based on the Oaxaca decomposition) includes besides other things the discrimination coefficient. The size of this coefficient is not possible to determine. The secondary aim of the bachelor thesis is to determine the impact of individual variables on the observed wage gaps. Factors which most often influence the wage gaps are education and age.
|
|
Clustering and regression analysis of micro panel data
Sobíšek, Lukáš ; Pecáková, Iva (advisor) ; Komárek, Arnošt (referee) ; Brabec, Marek (referee)
The main purpose of panel studies is to analyze changes in values of studied variables over time. In micro panel research, a large number of elements are periodically observed within the relatively short time period of just a few years. Moreover, the number of repeated measurements is small. This dissertation deals with contemporary approaches to the regression and the clustering analysis of micro panel data. One of the approaches to the micro panel analysis is to use multivariate statistical models originally designed for crosssectional data and modify them in order to take into account the within-subject correlation. The thesis summarizes available tools for the regression analysis of micro panel data. The known and currently used linear mixed effects models for a normally distributed dependent variable are recapitulated. Besides that, new approaches for analysis of a response variable with other than normal distribution are presented. These approaches include the generalized marginal linear model, the generalized linear mixed effects model and the Bayesian modelling approach. In addition to describing the aforementioned models, the paper also includes a brief overview of their implementation in the R software. The difficulty with the regression models adjusted for micro panel data is the ambiguity of their parameters estimation. This thesis proposes a way to improve the estimations through the cluster analysis. For this reason, the thesis also contains a description of methods of the cluster analysis of micro panel data. Because supply of the methods is limited, the main goal of this paper is to devise its own two-step approach for clustering micro panel data. In the first step, the panel data are transformed into a static form using a set of proposed characteristics of dynamics. These characteristics represent different features of time course of the observed variables. In the second step, the elements are clustered by conventional spatial clustering techniques (agglomerative clustering and the C-means partitioning). The clustering is based on a dissimilarity matrix of the values of clustering variables calculated in the first step. Another goal of this paper is to find out whether the suggested procedure leads to an improvement in quality of the regression models for this type of data. By means of a simulation study, the procedure drafted herein is compared to the procedure applied in the kml package of the R software, as well as to the clustering characteristics proposed by Urso (2004). The simulation study demonstrated better results of the proposed combination of clustering variables as compared to the other combinations currently used. A corresponding script written in the R-language represents another benefit of this paper. It is available on the attached CD and it can be used for analyses of readers own micro panel data.
|
|
CRM System Optimization
Fučík, Ivan ; Mildeová, Stanislava (advisor)
This thesis is focused on CRM solutions in small and medium-sized organizations with respect to the quality of their customer relationship. The main goal of this work is to design an optimal CRM solution in the environment of real organization. To achieve this goal it is necessary to understand the theoretical basis of several topics, such as organizations and their relationship with customers, CRM systems, their features and trends. On the basis of these theoretical topics it is possible to analyze current CRM solution in the organization. From the data obtained by the methods of observation and controlled interview it was possible to prepare a design for optimal CRM solution. This optimal solution comes also from user and organization requirements. The optimal CRM solution saves time and costs associated with current CRM solution and replaces existing and ineffective CRM tools.
|
|
The Changes of Body Temperature of Patients during a Medical Procedure in Total Anesthesia
BENEŠOVÁ, Monika
The first part of the present dissertation shows mechanisms of keeping of body temperature in an optimum range as well as it divides and evaluates range of body temperature. My dissertation also deals with the ways of measurement of body temperature, methods of measurement and tools which are neccessary for measurement of body temperature. Another part presents characteristics of aneshtesia its division, ways of application and tools which are used for total anesthesia. It is also described an observation of body temperature during total anesthesia, negative consequences of hypothermia, regulations of body temperature during total anesthesia and prevention and treatment of hypothermia. There are descriptions of targets and hypothesis in the second part. There were made five hypothesis. The third part shows methods of collecting data itself. They are results of stucture observation of changes of body temperature of patiens in total anesthesia during surgery.The fourth part are charts and graphs showing results of measurements of body temperature of our patients in total anesthesia as well as results of the questionnaires based on answers from asked nurses. There are particular hypothesis and their results in discussion part. Hypothesis H1 was proved. Hyphothesis H2 is not possible to be disproved. Hyphothesis H3 was not proved. Hyphothesis H4 was proved and hyphotesis H5 was proved. We can deduce from the results that active use of tools for keeping body temperature in a physiological range can prevent decrease of body temperature. It is clear from the questionnaires that nurses are aware of complications connected to hypothermia. They actively use tools for keeping body temperature in physiological range. There is a summary in the conclusion of the dessertation whether all estimated targets were accomplished. As a result of the dissertation we can assume that using of tools for keeping body temperature of total anasthesia patients should be a standard. There should be also a standard to measure body temperature during an operation in total anasthesia itself.
|
|
ELECTRON BEAM REMELTING OF PLASMA SPRAYED ALUMINA COATINGS
Matějíček, Jiří ; Veverka, J. ; Čížek, J. ; Kouřil, J.
Plasma sprayed alumina coatings find numerous applications in various fields, where they enhance the properties of the base material. Examples include thermal barriers, wear resistance, electrical insulation, and diffusion and corrosion barriers. A typical structure of plasma sprayed coatings, containing a multitude of voids and imperfectly bonded interfaces, gives them unique properties - particularly low thermal conductivity, high strain tolerance, etc. However, for certain applications such as permeation barriers or wear resistance, these voids may be detrimental.\nThis paper reports on the first experiments with remelting of plasma sprayed alumina coatings by electron beam technology, with the purpose of densifying the coatings and thereby eliminating the voids. Throughout the study, several parameters of the e-beam device were varied - beam current, traverse velocity and number of passes. The treated coatings were observed by light and electron microscopy and the thickness, structure and surface morphology of the remelted layer were determined and correlated with the process parameters. Based on the first series of experiments, the e-beam settings leading to dense and smooth remelted layer of sufficient thickness were obtained. In this layer, a change of phase composition and a marked increase in hardness were observed.\n
|
|
Sorption and Stabilization of Metals/Mettalloids by Innovative Synthesized Sorbent Amochar.
Ouředníček, P. ; Trakal, L. ; Komárek, M. ; Pohořelý, Michael
Remediation of contaminated soil which is based on stabilization and immobilization of potential\nhazardous substance by sorption materials has been studied intensively nowadays. Biochar – activated organic carbon belongs to this group of stabilizing agents which can adsorb wide range of contaminants, including metals/metalloids. Surface area of the biochars is quite large in general and functional groups (e.g. COO–) can form chelates or alkaline elements on the surface, which is represented by cation exchange capacity. Altogether with the high pH values (7.00 – 10.00), biochars are quite effective sorbents and can adsorb metals/metalloids from the solution (ground water), especially in acidic soils (in the environments affected by intensive mining activities). Sorption\neffectiveness can be increased (especially for As (V) or Cr (VI) sorption) by modification of biochar by various types of secondary oxides. Innovative sorbent AMOchar (AMO + biochar) has been synthesized currently. The product was prepared by adding of biochar to the reaction solution during amorphous manganese oxide (AMO) synthesis. The AMOchar was formed mainly by Mn-oxalates which had coated surface of the pristine biochar. AMOchar composite was able to remove significantly higher amounts of various metal(loid)s from the solution despite the rather high pH of the material. Sorption effectiveness was high not only in case of Pb (II) sorption (almost 99%), and Cd(II) (51.2%), but also a very high amount of As(V), 91.4%. Additionally, both AMOchar composite was able to reduce Mn leaching. This can avoid potential post-contamination caused by the dissolution of less stable Mn-oxalates as observed in the pure AMO.
Fulltext: content.csg -  PDF
Plný tet: SKMBT_22316111113040 - PDF
|
|
Arctic tundra dendrochronology
Lehejček, Jiří ; Svoboda, Miroslav (advisor) ; Monika, Monika (referee)
Historically unprecedented environmental change in the Arctic ecosystems is often given into the context of its past and possible future development. In the region where instrumental meteorological observations are scarce archives need to be investigated in order to address this issues. The comprehensive synthesis one of the archives: long-live circumpolar evergreen Juniperus communis L. shrub is presented here. 20 individuals from southwest Greenland were investigated at the cell anatomy level to understand the ecology of the species and unhide its potential for environmental and climate reconstructions. The findings are as follows:
i) Stop of exponential cross-sectional conduit-lumen widening with increasing age is in contrast with conduit-lumen nature of trees. This indicates that shrubs do not need to saturate their water and nutrient demands via traits of classical hydraulic conductivity law but rather developed different mechanisms. Extreme weather conditions result in prostrate growth form. However, different weather factors probably influence shrub growth differently: While snow and wind act mechanically (a), temperature influences the form of growth physiologically (b). a) So long as the young shrub stem has high resilience to bend back to an upright position after snow melt and so long as it can withstand the wind during the vegetation season it most likely grows upright and the conduit-lumens widen. b) Temperature, resp. freeze-thaw events are responsible for the shrubs preference of safety (finite size of conduit-lumens) over hydraulic efficiency, thus not allowing for more primary growth. All of these (and other) factors are apparently working together and the transition of vertical to more horizontal growth is gradual. As a consequence, the conduit-lumen sizes may not have to be further increased (due to ecophysiological restrictions possibly also must not) because water is no longer transported against gravity.
ii) Observed age/growth trend has to be taken into consideration for further employment of the wood anatomical parameter in paleoenvironmental studies. That is, shrub cell parameters can only be used for this purposes if correctly detrended. This allows for more accurate as well as longer reconstructions because youth trend was often neglected in reconstructions based on shrub annual-rings.
iii) The south-western Greenland Ice-Sheet (GrIS) melt rates reconstruction is presented for the whole 20th century. This part of GrIS is considered as the most active. According to the presented reconstruction current GrIS melt rates are not uncommon for the last century being comparable to first decades of 20th century. This finding is particularly important contribution to the debate on Atlantic meridional overturning circulation (AMOC). Too high fresh water inputs into the Northern Atlantic from GrIS melting may slow down or even stop the AMOC which would result in more continental climate in Europe. Presented results indicate that this threshold lies higher than observed current melt rates of GrIS.
Fascinating Juniperus comunnis species has shown to be able to address many ecological as well as environmental open questions and due to its longevity and abundant distribution has a great potential to become an important player in the Arctic research.
|
|
Information content in vocalization of guinea pigs (Cavia porcellus): individual distinction and recognition of predators
Baklová, Aneta ; Baranyiová, Eva (advisor) ; František, František (referee)
Guinea pigs represent domesticated precocious rodents which became common pets. From the first day after birth they are fully vocal. This thesis was devoted
to the vocalization of pups. The aim of the thesis was to 1) determine the age when the vocal individuality in whistle sound is demonstrable; 2) test possible ultrasonic signals emitted by young guinea pigs; 3) study the antipredator reactions and alarm calls to aerial (bird of prey) and terrestrial (dog) predators and human (control test).
A total of 16 guinea pig pups were tested for vocal individuality, 28 pups
for ultrasonic vocalization and 27 adolescents for predator recognition. When testing vocal ontogeny during the first 9 days after birth, I observed changes in temporal, frequency and parameter of intensity . When I test vocal individuality by cross-validated discriminant function analysis (DFA) based on ten acoustic parameters, calls were classified to correct animals with following success: day 1 = 71.9%, day 3 = 58.8%, day 5 = 53.10%, day 7 = 50.60% and day 9 = 63.10%. The highest frequency in whistle was 30.03 kHz. In predator discrimination reactions as freezing, fleeing and vigilance were observed. In the presence of dog, guinea pigs reacted for the longest time and most frequently by freezing. When confronted with a bird of prey, I observed for a longest time and most often fleeing and then freezing. When exposed to a human, guinea pigs showed mostly vigilance. Almost no vocalization was observed except for two events
of alarm calls - drrr as in the presence of dog and chirrup as reaction to bird of prey.
The following conclusions can be drawn from the presented results: 1) vocal individuality of guinea pigs is demonstrable immediately after birth and the rate
of individually different vocal parameters changes with age; 2) guinea pigs are able
to produce sound up to 30 kHz, i.e. within the ultrasound range, but signals of high frequencies are not crucial for their communication; 3) guinea pigs discriminate between terrestrial and aerial predators, but they emit alarm calls rather rarely.
|
|
Visual preferences for wind turbines
Běťáková, Vendula ; Sklenička, Petr (advisor) ; Janečková, Kristina (referee)
This dissertation is a selection of three papers focused on visual preference of wind turbines. Visual impact presents the connectivity of the articles, whereas each one deals with the topic from different perspective. First paper "Wind turbines location: How many and how far?" analyses in detail the characteristics of wind turbines themselves, i.e. their number and distance from observer or vantage point in relation to landscape quality. Second paper "How education orientation affects attitudes toward wind energy and wind farms: implications for the planning process" concentrates on respondents´ characteristics, in particular educational orientation, general attitude, occurrence of WTs in respondents´ vicinity and willingness to live close to WTs. Whereas first two papers use same assessment method to analyse differences of WTs perception from different point of view, the third paper "Futuristic Wind Power Systems Suitable as Artistic Sculptures" presents review of WTs appearance in general and proposals of possible future look as an alternative to traditional wind turbines.
|
guest ::
