| |
|
Evaluation of elastic parameters for models of isolated cells
Krbálek, Jaroslav ; Fuis, Vladimír (referee) ; Burša, Jiří (advisor)
This diploma thesis focuses on computational modeling of the cell mechanical tests. The goal of this thesis is to build a cell model and to simulate compression test on this model. If necessary, the model should be adjusted so the model reflects real cell behavior. It was created the cell model reflecting cytoplasm, nucleus, membrane and cell cytoskeleton. Cytoskeleton was modeled as tensegrity structure. After this, the pressure test was simulated on this model. The behavior of the cell model and real cell was compared using the stress force. The stress force - cell deformation curve was markedly different for the cell model and the real cell. For this reason, the cytoplasm material model was adjusted. The difference between the curves was acceptable after this modification. It was found during computations that the cytoskeleton model influence on the cell load is minimal. These results does not reflects real cell behavior, which means that the model is considered inadequate for performing stress load simulation.
|
|
The Model of Financial Compensation for placement of a Deep Geological Repository of Radioactive Waste in the Czech republic in period from 2010 to 2016
Englerová, Anna ; Zeman, Martin (advisor) ; Vebrová, Ludmila (referee)
Author examines a way of allocation of governmental financial resources to municipalities in locations preselected for deep geological repository. She is searching for a way how to add a motivational incentive to the process of allocation of financial resources in order to improve municipalities attitude towards deep geological repository. Hypothesis, examined in this thesis, contains two related questions. It is assumed that (1) amount and structure of financial resources can significantly affect municipalities decision making and also that (2) current mechanism of allocation of compensations is ineffective and does not create sufficient incentives. Currently (end of the year 2016), negotiations between government and municipalities are in crisis despite significant financial compensation from government nuclear account to the municipalities. This thesis have potential to change municipalities negative stance on deep geological repository through motivational model of resource allocation. Theoretical part reviews basic economic background and introduces historical, sociological, technological and economic views of radioactivity and deep geological repository. In practical part author analyzes socio-economic situation, compares evolution of transfers from government to municipalities with their attitude towards deep geological repository in time and shows that current system of resource allocation does not motivate the municipalities to change their stance on deep geological repository. That confirms second part of our hypothesis. Author also proposes a motivational model of resource alllocation. She confirms its viability by comparing it with similar models from other countries, by surveying mayors of concerned municipalities and also by examining experts opinion. Verification of the model confirmed its motivational effect. By that, first assumption of our hypothesis, that structure of resource allocation can significantly affect municipalities decision making, was confirmed.
|
|
Analysis and modification of thin layers using ion beams
Jonner, Jakub ; Lörinčík, Jan (referee) ; Bábor, Petr (advisor)
This diploma thesis deals with analysis and modification of thin layers using ion beams. The first part of this diploma thesis deals with phenomena accompanying ion beam bombardment of solid matter. The second part of this diploma thesis is concerned with Secondary Ion Mass Spectroscopy (SIMS) and Low Energy Ion Scattering (LAIS). This work convey some basic information about these two techniques and it also deals with some benefits result in their connection into parallel depth profiling mode (such as better depth resolution of the LEIS profile, quantification of the SIMS). These benefits are demonstrated on MoSi film measurement. Within the framework of this thesis a new UHV manipulator was designed. This new UHV manipulator is equipped with precise stepper UHV motor and since the proportions are smaller, the manipulation with a sample in a space limited UHV chamber is much more comfortable and more precise. The third part of this diploma thesis deals with ion-beam induced transformation of epitaxially grown Fe films with thickness of 22 monolayer (ML) and 44 ML on Cu(100) single crystal at room temperature. Metastable Fe films of 22 ML thickness were prepared in CO pressure and 44 ML Fe films were prepared by co-evaporation of Fe with Fe64Ni36 (invar). Structural changes are analyzed by scanning tunneling microscopy and low-energy electron diffraction. The aim of this thesis is to discuss the influence of the sputtering parameters such as ion dose and ion energy on the nucleation of bcc nanocrystals, their growth, final shape and size. The influence of different Ni concentration on stability of 44 ML thick Fe films is also discussed.
|
| |
|
Optical properties of the GaN on sapphire
Skalský, Miroslav ; Janta, Jiří ; Čtyroký, Jiří ; Stejskal, J. ; Hüttel, I.
The method of mode spectroscopy was used to measure optical properties of epitaxial layers of gallium nitride (GaN) deposited onto the sapphire substrate. The results of the measurement of the layer thickness, refractive indices, and the attenuation of guided modes at the wavelengths of 632.8 nm and 781 nm are presented. From experimental values of attenuation of different guided modes, the contributions of bulk absorption and scattering at the interfaces of the layer to the total optical loss in the waveguide are determined.
|
| |
| |
|
Fluidized-bed Combustion of Dry Stabilized Sewage Sludge in Oxy-fuel Mode
Moško, Jaroslav ; Pohořelý, Michael ; Durda, Tomáš ; Zach, Boleslav ; Šyc, Michal ; Svoboda, Karel
Sewage sludge is an inevitable waste stream from wastewater treatment and its disposal is complicated due to specific characteristics of its composition. Sewage sludge combustion/incineration is the only suitable way for disposal of large volumes of sewage sludge containing POPs and some heavy metals. Sewage sludge combustion reduces the volume of such waste and causes destruction of organic contaminants. Oxy-fuel combustion is a technology for simplifying CO2 sequestration from the flue gas by using nearly pure oxygen instead of air for the combustion. In order to control the combustion temperature, part of the flue gas is recycled to combustion chamber. The paper brings information about investigation of the effects of combustion temperature and concentration of oxygen in inlet combustion media on the emissions of NOx, N2O and SO2 in FB combustion of sewage sludge. The experimental results have shown that an increase in combustion temperature leads to an increase in NOx and to a decrease in N2O emissions in the temperature range 750–930 °C. The lowest SO2 emissions were measured in the temperature interval from 800 to 820 °C in all experiments with different oxygen concentration in inlet gas. It was found that when the oxygen concentration in inlet gas increased, the emissions of SO2 increased while emissions of NOx slightly decreased.
Fulltext: content.csg -  PDF
Plný tet: SKMBT_C22016112214480 - PDF
|
|
Unsteadiness in sprays of effervescent atomizers
Beinstein, Zbyněk ; Volavý, Jaroslav (referee) ; Jedelský, Jan (advisor)
Master thesis focused on the research of the effervescent atomizers. Effervescent atomizers belong to a group of two-phase atomizers, which are often used in combustion applications. Right there in combustion applications, the degree of the stability sprays has a significant impact on combustion efficiency and exhaust gas emissions. The main aim of this work was to asses the level of spray unsteadiness depending on the atomizer design and its operating mode. The effect of construction was studied on the diameter and length of mixing chamber, and then on the size, number and location of aeration holes. Seventeen specific variants of the atomizer were constructed by different combinations of these design parameters. Each of these variants was measured in three operating modes, which were represented by a liquid pressure at the inlet to the atomizer and gas-to-liquid mass flow ratio (GLR). To evaluate the level of spray unsteadiness was used a methodology, which compares the ideal element´s distribution into the interparticle time bin, defined for the ideal (stable) spray, with the experimentally observed distribution. The laser measurement system P/DPA (Phase Doppler Particle Analyzer) was used to determine the experimental interparticle distribution. The result of the comparison of the ideal and the experimental distribution was the parameter , which expresses the level of spray unsteadiness for a specific atomizer and operating mode. With that parameter it was possible to compare the individual atomizers and determinate to the benefit of various construction´s correction of the atomizer. The results showed the recommendation for the modifications of the atomizer, creating a spray with a minimum level of spray´s unsteadiness. For the surveyed atomizer and his individual costruction´s variations the drawing was made.
|
guest ::
