| |
|
Estimation of the technical level of FORD vehicles for valuation purposes
Valešová, Jaroslava ; Tylšar, Vladimír (referee) ; Kledus, Robert (advisor)
he paper analyzes the current production of Ford cars and analysis in terms of development of their technical level. It was created parametric comparison of currently produced vehicles on the market. For the most common models of the Fiesta, Focus and Mondeo is compared to change the technical level over the last 10 years. On the basis of these evaluations was created basis for determining the coefficient of technical level. A further assessed changes in exchange values for the most common models for 10 years, and their comparison with the corresponding amortization scales in accordance with the methodology Valuation standard number I / 2015 and so were consistently reflected changes in technical standards for older models.
|
|
Investice do akcií a zlata
Horký, Lukáš
This bachelor thesis focuses on the comparison between the selected investment assests, namely stocks and gold, based on historical return, risk and Sharpe ratio, in period 2000 - 2014. The first part describes the basic theoretical background of the financial market and mentioned investment assests. This section also describes how can be traded with these assests on financial market. The next part is an analysis of the factors which significantly participates in development of a stock and gold markets. The third and final part focuses on the analysing and processing data in the selected time period. Based on the calculated values in the final stage compares shares and golds.
|
|
The value of life from macroenomic point of view in United States of America, Czech republic and Russia between years 2007-2014
Antoš, Michal ; Zeman, Martin (advisor) ; Brabec, Petr (referee)
The subject of this bachelor thesis is the research of the value of life calculation in the Czech republic, United states of America and Russia in 2007-2014.The main purpose is to analyze and compare values of life and major factors influencing them. The hypothesis is that value of life differs in selected countries due to distinctions of sections influencing them. The theoretical part is devoted to sections directly or indirectly influencing values of life, and then analyzing and comparing them together within the selected countries. The selected sections are education, health care, labor market, inequality and living standards. The practical thesis approach is to calculate the values of life for the individual states. The values of life are calculated for so called, representative individual, who is 40-years old citizen of selected country. In the period, in which is the value of life calculated, the retirement age and life expectancy are also considered in formula. Calculated values are examined and the economic and political measures are offered to the states, which can turn into significant increases in the value of life in future.
|
|
Verification Tightness of Headlamp
Maule, Jiří ; Pernikář, Jiří (referee) ; Osička, Karel (advisor)
The task of my work is to describe and analyse tightness control of front headlights in automotive industry. This work is concerned with theoretical indi-cative allocation according to the light source, development and contruction of headlights in preamble. There is shown the way of disclosing the outflow pres-sure area at loose headlight in next part of this work. It defines the most proba-bly caused reason of untightness with help of Ishikawov diagram. There is also made evaluation of measured values and determined the main cause of un-tightness. At the end there are shown possibilities of statistic´s evaluation of measured values and made changes necesarry for untightness elimination.
|
|
Simulation of cutting force during milling process with straight tooth plain milling cutter.
Zemčík, Tomáš ; Sedlák, Josef (referee) ; Zemčík, Oskar (advisor)
To make a simulation of cutting force during milling process with cilindrical cutter is the aim of this diploma thesis. Preliminary part is devoted to technology of milling, milling cutters and cutting materials. The next section is aimed at kinematics of the cutting process, a theoretical analysis of power proportion, the possibility of measurement of force actions. General information about the programming software, a theoretical simulation model, graphical environment of created application, are the other points of this diploma thesis. The work also includes evaluation of the experimentally measured values and compared with values obtained from the created application.
|
|
Optimization of Manufacturing and Assembling Technology of the Valve Bolt
Hrouzková, Andrea ; Zapletal, Josef (referee) ; Doležal, Pavel (advisor)
The thesis aimed to study the impact of manufacturing and assembly technology, the valve bolt fitted to diesel high pressure pump CP3 in the Bosch, which has been found to leak. As experimental material was chosen heat treated bolts M16x1,5 made of material 12 050th. Groups of samples were produced in two ranges hardness. Experimental determination of the optimum range of hardness was assessed on the basis of the results of the process of the screw and set the value of plastic deformation of the sealing surfaces of the parts. Experimental section also deals with the analysis of bearing surfaces on the pump and the components, after the screw process. To some extent, is observed as surface treatment
|
|
Brand marketing strategy, men´s clothing brand Stones by Steilmann
Pařez, David ; Zadražilová, Dana (advisor) ; Khelerová, Vladimíra (referee)
The aim of my bachelor ´s thesis Brand marketing strategy, men ´s clothing brand Stones by Steilmann Praha is to undertake marketing research of brand and its subsequent evaluation and suggest modifications of marketing brand strategy. The first part deals with consumer issues and consumer behavior, describes what is the brand and its history, defines the brand identity, brand image, awareness and the way of increasing brand value. Further I mention particular steps of the process of the strategic brand management. At the beginning of the following section is the analysis of the current situation on the Czech market with the men´s fashion, introduction of the brand Stones and its history, and description of the competitors. In the next part there is SWOT and marketing mix analysis. Another part of my thesis is marketing research of the brand Stones and evaluation of research results. In the final part I suggest modification of the marketing brand strategy with respect to the survey results.
|
|
The crime of disorderly conduct
Prokop, Lukáš ; Vokoun, Rudolf (advisor) ; Herczeg, Jiří (referee)
The thesis deals with the topic of the criminal offense of disorderly conduct focusing on disruption of organised sport events. This action is also referred to as spectator violence. The term of spectator violence, sometimes simplified as hooliganism, is used in different ways and it is not strictly defined. It usually includes violent or dangerous behaviour of spectators during sport events. The content is divided into eight chapters, which aim at defining this term and offer a complex and clear analysis. Opening passages are dedicated to criminal offense of disorderly conduct as such. They include an analysis of prerequisites conditioning the committing of criminal offense of disorderly conduct according to the § 358 of penal code. It serves as a vocabulary of terms for further study and for understanding of the mutual interconnection with the term spectator violence. Chapter III is an attempt at a proper definition of the spectator violence phenomenon through the description of values and ideals that are threatened by this conduct and through the overview of the methods used while committing this crime. The next part deals with the profiles of the perpetrators established through the criminological characteristics. Psychological motivation of the spectators to visit the stadiums is also looked...
|
|
Creation of the Enterprise Architecture model according to the TOGAF framework
Čapek, Jan ; Doucek, Petr (advisor) ; Zeman, Petr (referee)
The present diploma thesis aims at introducing the Enterprise Architecture and creating an abstract model of a company. The primary focus is on application and process layers as defined in the architecture framework TOGAF. The thesis is divided into theoretical and practical part. The theoretical chapter starts with a business model analysis which means to describe mission vision and companys values as a part of the strategy framework. Furthermore the business processes are described in the latter part of this section. This chapter attempts to explain how to map a business process and to categorize it by nature and maturity level. Penultimate chapter introduces the Enterprise Architecture in general. This section includes arguments as to why the companies should be concerned with the Enterprise Architecture advantages of the Enterprise Architecture implementation into the companys documentation relationship of companys core business and IT and examples of the Enterprise Architecture frameworks. The last chapter deals with the TOGAF framework where Architecture Development Method is described. This means how Enterprise Architecture model is created and how to implement changes into the layers according to the TOGAF framework. Simultaneously the last section of this chapter describes the reference models which provide graphical overview of all abstractions layers. The practical part of the thesis elaborates on the theoretical part using the Architecture Development Method process in order to create the Enterprise Architecture model according to TOGAF framework. Same as the theoretical part it only focuses on the application and process layer. Firstly the business model is decomposed into vision mission and companys values to the companys strategy and business goals in order to grasp further understanding of business processes detailed description. Subsequently the abovementioned aspects are recomposed to create process map which provides the management overview. The application layer undergoes the same process; nonetheless the process map is replaced by information system description and reference model creation. Once the models are created the thesis compares them with the business and strategic goals. The benefit brought by this thesis is critical evaluation of current status to propose changes to achieve target architacture according business and strategic goals established by management.
|
guest ::
