| |
|
Modelování profilů rychlosti větru naměřených sodarem v komplexním terénu
Hošek, Jiří
The wind profiles with two Doppler sodars were measured in wide range of synoptic situations in Ore mountains (Erzgebirge) and in the region of Orlické hory (mountains), both in the Czech republic. Ore mountains represent the region most suitable for construction of wind turbines in the Czech republic. Concerning the observed wind profiles, their generalization may serve for improvement of precision of the simulated wind profile fields. In the second part of the work, we performed the modelling of wind speed profiles in the complex terrain of above-mentioned mountain ranges. We have applied the non-hydrostatic meso-scale models KAMM and PIAP. The numerical simulations with the models were performed for different situations of the ambient flow, described by geostrophic wind speed and direction, and temperature stratification.
|
|
Evaluation of elastic parameters for models of isolated cells
Krbálek, Jaroslav ; Fuis, Vladimír (referee) ; Burša, Jiří (advisor)
This diploma thesis focuses on computational modeling of the cell mechanical tests. The goal of this thesis is to build a cell model and to simulate compression test on this model. If necessary, the model should be adjusted so the model reflects real cell behavior. It was created the cell model reflecting cytoplasm, nucleus, membrane and cell cytoskeleton. Cytoskeleton was modeled as tensegrity structure. After this, the pressure test was simulated on this model. The behavior of the cell model and real cell was compared using the stress force. The stress force - cell deformation curve was markedly different for the cell model and the real cell. For this reason, the cytoplasm material model was adjusted. The difference between the curves was acceptable after this modification. It was found during computations that the cytoskeleton model influence on the cell load is minimal. These results does not reflects real cell behavior, which means that the model is considered inadequate for performing stress load simulation.
|
|
Evaluation and motivation in public administration
Vašíčková, Natálie ; Mitwallyová, Helena (advisor) ; Vláčil, Jan (referee)
The theme of the bachelor thesis is the evaluation and motivation of employees in public administration. The introductory part outlines the evaluation and motivation of employees on a general level, and then describes the specifics applicable for public administration. The practical part is focused on the evaluation and motivation systems used at selected institutions of public administration. It aims to assess these systems, suggest possible recommendations and find out whether the systems in use include modern management methods, such as evaluation interviews, competency models and regular system of employee evaluation as such. The research method consisted of interviews with human resources managers at selected institutions of public administration. Complementary information was obtained from materials created by these institutions themselves. All institutions of public administration are governed by Act No. 234/2014 Coll. on Civil Service, enshrining the evaluation of state employees. However, it depends on whether employees are evaluated formally, or if additional evaluation tools beyond the framework of the law are deployed, e.g. competency models. Officials of territorial authorities are subject to Act No. 312/2002 Coll., which does not explicitly define employee evaluation, yet employees are evaluated at many regional as well as local administration units. The results of the research survey confirmed that modern management methods are used in public administration and that the evaluation systems do not have any significant shortcomings.
|
| |
|
Is import of goods from european countries to Czech republic more or less influenced by changes in nominal and real exchange rates than in non european countries?
Vereš, Jan ; Stroukal, Dominik (advisor) ; Slaný, Martin (referee)
This bachelor thesis analyses the connection between import of goods from foreign countries to Czech Republic and the exchange rate changes. The initial hypothesis of this paper is to prove that the depreciation of domestic currency has positive influence on balance of trade balance. For this purpose there is eight econometric models which were created by using time series from years 2003 to 2016. These models are divided in pairs among four chosen countries. For each country two models were created that follow the development of trade balance between Czech Republic and one of the countries in two different time frames. All the models always use the real effective exchange rate, growth rate of GDP for Czech Republic and growth rate of GDP for one of the countries as explanatory variable. It is connected with the second task of this thesis, which is the analysis of the differences in the behaviour of the models that belong to the countries which are members of the EU and these that are not. The aim is to find out whether the existence of tariffs on imported goods from countries out of the EU causes visible differences in the behaviour of the variables that were included in the models. Based on the outcomes of all eight models the main hypothesis has been proved right for three out of four countries. In the models for Germany, China and France the relation of real exchange rate and trade balance came out as positive in long term, in short term the outcome was ambiguous. The second question of this thesis has been answered, but its added value is questionable. The final models for each state do show some noticeable differences and they can be used to determine if the influence of the change of exchange rates on trade balance is smaller or bigger in the countries where tariffs are used. On the other hand, from the results we can learn that the sample of only four countries is insufficient for the deduction of any conclusions.
|
|
The Model of Financial Compensation for placement of a Deep Geological Repository of Radioactive Waste in the Czech republic in period from 2010 to 2016
Englerová, Anna ; Zeman, Martin (advisor) ; Vebrová, Ludmila (referee)
Author examines a way of allocation of governmental financial resources to municipalities in locations preselected for deep geological repository. She is searching for a way how to add a motivational incentive to the process of allocation of financial resources in order to improve municipalities attitude towards deep geological repository. Hypothesis, examined in this thesis, contains two related questions. It is assumed that (1) amount and structure of financial resources can significantly affect municipalities decision making and also that (2) current mechanism of allocation of compensations is ineffective and does not create sufficient incentives. Currently (end of the year 2016), negotiations between government and municipalities are in crisis despite significant financial compensation from government nuclear account to the municipalities. This thesis have potential to change municipalities negative stance on deep geological repository through motivational model of resource allocation. Theoretical part reviews basic economic background and introduces historical, sociological, technological and economic views of radioactivity and deep geological repository. In practical part author analyzes socio-economic situation, compares evolution of transfers from government to municipalities with their attitude towards deep geological repository in time and shows that current system of resource allocation does not motivate the municipalities to change their stance on deep geological repository. That confirms second part of our hypothesis. Author also proposes a motivational model of resource alllocation. She confirms its viability by comparing it with similar models from other countries, by surveying mayors of concerned municipalities and also by examining experts opinion. Verification of the model confirmed its motivational effect. By that, first assumption of our hypothesis, that structure of resource allocation can significantly affect municipalities decision making, was confirmed.
|
|
Influence of social politics on fertility rate in specific regions of Czech republic
Dvořák, Josef ; Melzochová, Jitka (advisor) ; Babin, Jan (referee)
Thesis is focused on relationship between fertility rate and tools of state support. The goal is to reveal relationship between these two factors. Partial goal is to discover specific effects of tools of state support in specific regions of Czech republic. I have aimed on research at national level and also specific regions between years 1993-2014. In order to find these relationships I used method that compares differences in development of the fertility rate. After that, I set up regression model solved by method called fixed effects. For specific regions analysis was used OLS method. Model was able to explain more than 80 % of variability. This results can be used for predicting of citizens behavior, when some changes in family allowances occurs. Main finding is, that most motivating tools are parenting allowances and child benefits.
|
|
Empirical analysis of Okun’s law in Iceland
Zajíček, Zdeněk ; Slaný, Martin (advisor) ; Chytilová, Helena (referee)
This thesis deals with empirical analysis of Okuns law in Iceland. Okuns hypothesis of negative relationship between real GDP and the rate of unemployment is being tested on two models, difference and gap, using OLS estimation. Also there are two filtration methods used (Hodrick-Prescott and Baxter-King) for gap model estimation. The results of all models showed weak relationship of variables, but proved the hypothesis. In the following part, the same procedure is being used on Finlands data, to get comparison of coefficients. Results for Finland showed weaker bond of variables than in Iceland, but the Okuns hypothesis still holds. Last part is focused on finding the sensitivity of rate of unemployment to changes in added value of each economical sector in Iceland using the production approach model. This model gave inconclusive results due to insufficient data available.
|
|
A car prototype manufacture using modern methods and CAD/CAM
Horák, Aleš ; Zouhar, Jan (referee) ; Sedlák, Josef (advisor)
The project developed under the engineering studies, solves the problem of production of a prototype car using modern technology, reverse engineering and CAD / CAM. Based on the literary study of the issue, was designed process of digitization of the physical model of car, including the treatment and processing of data. Follow-up step was to verify the production of the additive rapid prototyping technology - FDM method. Verification of the results was performed on a vertical milling cantilever FV 25 CNC with control system Heidenhain iTNC 530 using a cutting strategies by PowerMILL CAM software. At the end of the resulting models edit as necessary.
|
guest ::
