|
|
Mobile robot control system
Řezníček, Radek ; Kříž, Vlastimil (referee) ; Hynčica, Ondřej (advisor)
This thesis deals with differential drive wheeled mobile robot which is running under a real-time operating system. Introductory part is focused on theoretical description of robot and its original firmware. Practical part deals with creating software and implementation several methods that allow following the line by robot using reflectance sensor array. Significant part of this thesis is focused on design and implementation of communication protocol, based on IEEE 802.15.4 which provides communication between robot and PC. There is also created a PC application that allows to transmit commands to the robot and display information gained from robot.
|
|
|
Data concentrator for data acquisition and wireless modules
Palacký, Tomáš ; Pásek, Jan (referee) ; Fiedler, Petr (advisor)
This master’s thesis deals with design and construction of a system for repote measurement of air quality in buildings. The first section provides a selection and analysis of used hardware and software components: minicomputer Raspberry Pi, STM32F401 microcontroller, communication module XBee-Pro, CO2 sensor and also communication interfaces IC and USART. The next section includes a design of electrical wiring, circuit board, configuration of the wireless modules and a software implementation for microcontroller and the concentrator.
|
|
|
Exhaustion control system
Bršel, Boris ; Šebesta, Jiří (referee) ; Fedra, Zbyněk (advisor)
The topic for my bachelor’s thesis is control system of exhaustion for wood industry. It is very broad issue, and since I am without experiences in this division I have chosen to create easier model of exhaustion system. I would like to continue in this project in master´s thesis too. My thesis consists of description the requisites for system like this, draft of the preparation and also practical preparation for joinery manufactory. I have decided to control the parts of system by microcontrollers, which communicate with each other wireless and control activity of system´s parts of exhaustion in workshop. The role of this thesis was also to compare the achieved results with other possibilities of control of exhaustion from the economic and technological points of view.
|
|
|
Terminal for testing of data communication of public transport vehicles
Fiala, Michal ; Holek, Radovan (referee) ; Macho, Tomáš (advisor)
This term paper deals with subject of wireless communication of city rail transport cars. In this paper are described individual modules for transmission and receiving of data containing communication between city rail transport cars and measures of siding switches. Then there are discussed possibilities of design of system for testing functionality of transmitting and receiving modules and the system is consequently designed. There are also described communication principles and protocol used for wireless communication and MODBUS protocol used for communication over RS-485 serial line. In the end was the system manufactured, completed and equipped with necessary software.
|
|
|
Autonomous RC ship model
Jevická, Barbora ; Marada, Tomáš (referee) ; Zuth, Daniel (advisor)
This Master’s thesis deals with working on development kit, which is used for RC ship model. The basis are programmable Nucleo STM32 microcontrollers, to which other used modules are connected. The goal is to test each component and create system for navigation of the ship and wireless communication between controller and ship. GPS module and compass are used to navigate and determine the direction of the ship. Controller and ship can communicate through bidirectional wireless modules with antenna. The RC ship model can be switched between manual and autonomous modes. The main result of this thesis is autonomous movement of the ship on to a predetermined GPS coordinates and parallel communication with the user.
|
|
|
Central unit of the wireless sensors network
Ptáček, Zdeněk ; Macháň, Ladislav (referee) ; Pavlík, Michal (advisor)
This work deals with function and control description of wireless communication circuit nRF24L01+ and its possible use for the creation of local wireless sensor network of star topology. Further studies of the function of sensor network and designs the central control unit for measured data collecting. At the same time discusses the possibility of the battery supply and system optimization.
|
|
|
Wireless communication module in 868 MHz band with MESH network support
Uhlíř, Marcel ; Fedra, Zbyněk (referee) ; Povalač, Aleš (advisor)
This thesis deals with design of a wireless communication module that allows communication in the unlicensed band at the frequency of 868 MHz. The designed module can be easily implemented in various types of embedded devices using SMT technology. This communication module consists of a low-power radio frequency transmitted, balancing element, impedance matching, radio antenna and electromagnetic shielding. Communication between the embedded device and the wireless communication module is realized using the SPI interface and configurable GPIOs. Part of this work is the proposed firmware library, which operates the wireless communication module and allows communication in peer-to-peer mode and in MESH network mode. A procedure for its creation and management is created as part of the MESH network. The use of this work is directed to the field of control and sensor systems with application in automation.
|
|
|
Wireless meteostation
Holain, Martin ; Macháň, Ladislav (referee) ; Háze, Jiří (advisor)
The objective of this thesis is a design of the amateurish wireless weather station which is used to measure temperature, relative humidity, barometric pressure and velocity and direction of air flow. Part of this thesis also describes design of a device intended for display, processing and storage of actual measured data obtained from weather station.
|
|
|
CCD camera with wirelles interface
Hynčica, Tomáš ; Fiedler, Petr (referee) ; Bradáč, Zdeněk (advisor)
The work is dealing with the problem of wireless transfer of visual information from CCD camera. A circuit board for the camera interface is designed and realized. The wireless communication is based on the IEEE 802.15.4. Software for components of the system is developed.
|
|
|
Electronic business card/price tag with wireless communication
Sirůček, Václav ; Sýkora, Tomáš (referee) ; Bradáč, Zdeněk (advisor)
The Bachelor thesis deals with the design of an electronic business card, a portable imaging device that will display data about the wearer (name, surname, phone number and email). Claims are for long-term battery life and remote display of data on an electronic ink display. At work there is a solution for powering the product with a display and its wireless communication with the computer or phone. It also deals with battery status displays, display updates, circuit schematics, electronic business card case design and final realization.
|
guest ::
