|
| |
|
|
Information System Assessment and Proposal of ICT Modification
Zezula, Dominik ; Šebestová, Monika (referee) ; Novák, Lukáš (advisor)
This thesis is focused on the considerations of Husqvarna Manufacturing CZ s.r.o.´s informational system and selecting the most appropriate improvements. The first part describes the theoretical background. The second part follows the analysis of the current state and requirements of the company. The main part is devoted to the design of own solution and the last one deals with the summary of changes. The output is an informati-on system enriched with improvements.
|
|
| |
|
|
Color Correction for 3D scanner and 3D printer
Kratochvíla, Michael ; Dorazil, Jan (referee) ; Říha, Kamil (advisor)
This thesis deals with color correction of a chain that starts with the 3D Artec MHT scanner, and ends with the 3D printers (CJP – Color Jet Printing technology). In principle, it is necessary to control the color interpretation of the entire chain from the scanning of real models to the 3D print model. With color properties and their color shade, including color textures. The principle of model surface scanning using a 3D scanner is in the same principle as photo camera which scans using a conventional CMOS chip. For this reason, color palettes were scanned using the photo camera and the resulting digital data were analyzed by the Darktable software. This analysis consisted of comparing the scanned color shades of the surface with the spectrofotometer measured data. The main goal of this method was to achieve color precision in the digital data during their acquirement, adjustment and interpretation. Then the same principle was applied to the data acquired by the 3D scanner to create an ICC profile of the 3D scanner. Because the 3D printer (CJP – Color Jet Printing) uses the same principle as the 2D printer, the 2D printing device calibration principle was used again to calibrate it. There have been defined procedures that adjust the color shade to the spectrophotometrically correct shades of the resulting print on a 3D printer. Color swatches were also printed for print quality verification. It has been found that with photo camera, which was used for objective measurement in the L*a*b* coordinates of independent space, any color setting and their adjustment is very sensitive to even small imprecisions. It has been found that it is not easy to obtain accurate colors within the Detla E
|
|
|
Filament mixer with variable contribution of input materials for FDM 3D printers
Hráček, Michal ; Jaššo, Kamil (referee) ; Bayer, Robert (advisor)
This bachelor thesis deals with the theory of 3D printing and 3D printers and the possibility of mixing two filaments. The work is focused especially on extruder, which is one of the main parts of 3D printer, but also on mounting and cooling the print head. In the extruder, the filament is fed and subsequently melted. Furthermore, the work mentions the problems of stepper motors, describes the used components for the practical part of the work and implementation of the entire device from PCB design, writing FW, to design mechanical parts.
|
|
|
Property record based on RFID technology
Černý, Jakub ; Dydowicz,, Petr (referee) ; Kříž, Jiří (advisor)
This bachelor work focuses on the study of the modern technology of RFID tags and its application at Faculty of Business and Management in Brno. The main subject of this work is to use this technology as a replacement of barcode technology with the intention of raising processing speed, effectiveness and protection against stealing.
|
|
|
Project of Home Network
Makovský, Vladimír ; Kobelka, Miroslav (referee) ; Ondrák, Viktor (advisor)
The goal of this bachelor's thesis is to project a small local computer net for a family living in a family house. Here is the description of processes that are necessary for implementing a computer net so that the members of the family could use this computer net in accordance with their requirements.
|
|
|
Biography and Works of Printer and Wood-Cutter Michael Peterle (†1588)
Tvrzníková, Jana ; Voit, Petr (advisor) ; Veselá, Lenka (referee)
Thesis about life and work of a printer and a woodcutter Michael Peterle is focused mainly on his assumed woodcutting activity (he was active between years 1562-1588). It is based on following assumption: although Michael Peterle did not sign his woodcuts, he illustrated portion of his prints. His printing office produced multitude of topical compositions and some interesting illustrated books. Photodocumentation and description of woodcutting illustrations and decoration (according to Soupis tisků Michaela Peterla staršího a jeho nástupců by Pravoslav Kneidl and more recent sources) was created during writing of this thesis. Attention was also focused on context of usage of illustrations. Afterwards Illustrations and decoration of Peterle's competition in the Czech Republic and Germany were examined. Conducted research showed, that Michael Peterle was not woodcutter, but only a colorist and a printer. This thesis provides another view on printing production in the second half of the 16th century. Key words: Peterle, Michael; printer; bookprinting; woodcut; illustration; decoration
|
|
|
Front-pages and illustrations of the sixfold Bible of Kralice
Keřkovská, Marta ; Royt, Jan (advisor) ; Nespěšná Hamsíková, Magdaléna (referee)
Front-pages and illustrations of the sixfold Bible of Kralice The Bachelor thesis will be aimed at the illustrations of the sixfold Bible of Kralice published gradually from 1579 to 1596. First of all, the Ivančice and Kralice printing house will be introduced. Its origin and activities will be dealt with. Afterwards, it will be necessary to explain the printing technology which was used by the printers of Ivančice and Kralice in their publications. The thesis will also talk about the printers of the house and their sources of inspiration. Eventually, if the printers' works are identical with these sources they will be compared. The main part of the thesis will be especially focused on iconographic description of the front-pages in particular parts of the Bible. The thesis will also mention Jiří Melantrich's printing house which printed Bibles approximately in the same time as Ivančice and Kralice printing house. The printer will be briefly introduced and so will his published Bible. The end of the chapter will focus on the comparison of the Ivančice and Kralice printing house with Melantrich's printing house. Keywords Key words: Bible, bookprinting, printing house, graphics, iconography, history, Ivančice, Kralice
|
|
|
Information System Assessment and Proposal of ICT Modification
Zezula, Dominik ; Šebestová, Monika (referee) ; Novák, Lukáš (advisor)
This thesis is focused on the considerations of Husqvarna Manufacturing CZ s.r.o.´s informational system and selecting the most appropriate improvements. The first part describes the theoretical background. The second part follows the analysis of the current state and requirements of the company. The main part is devoted to the design of own solution and the last one deals with the summary of changes. The output is an informati-on system enriched with improvements.
|
guest ::
