|
|
Analysis ofelectrical output from the power plat working in the middle of town
Hrubý, Radek ; Brno,, Luděk Ondroušek - Teplárny (referee) ; Matoušek, Antonín (advisor)
The work focuses on outlet of the electrical power from power plants operating in urban areas. After a short analysis of the general possibility of leading out electric power from power plants of various types, thesis continues to describe of outlet electrical power from PPC Červený Mlýn. Subsequently, are calculated short-circuit conditions in the main switching station. It follows an analysis of power lines. The last part dealt with the issue of reliability of sources in connection with random transition processes in the electrical network and the light of the operational reliability of electrical power equipment.
|
|
|
Current Sensors
Vaculík, Vlastimil ; Červinka, Dalibor (referee) ; Patočka, Miroslav (advisor)
This diploma theisis deals with the theoretical analysis of the known types of current sensors, including for example, current transformers, shunts, and advanced sensors using Hall sensor or Rogowski coil. Subsequently, the rest of the work deals with the issue of current transducers with Hall sensors, without using a ferromagnetic circuit. For optimal currnet measure and overall precision, several possible options are designed and calculated. This includes number of sensing elements and distribution of sensors around the wires. Based on calaculation of magnetic intensity, related 3D charts ale plotted unsing Excel software. These charts illustrate the theoretical calculations of field distribution around conductors for various number of sensor. In the last part, components ale designed for practical implementation and scheme of electrical wiring. According to this scheme there is PCB designed as well. Whole current meter ir practically build and its results are compared with theoretical assumtions that are discussed in conclusion part of this theisis.
|
|
|
Analysis of the stator and rotor pack termination effect on the synchronous machine by FEM
Michailidis, Petr ; Valenta, Jiří (referee) ; Skalka, Miroslav (advisor)
This thesis deals with simulation’s possibilities of the electromagnetic fields in electrical machines. A finite element method is the final element technique. The content of this thesis is a model and mesh creation and electromagnetic simulation of synchronous machine. The stator and rotor pack termination effect on the synchronous machine.is analyzed by finite element method in ANSYS program. The type of the stator termination pack is described by four segments. The magnetic field distribution is deformed due to the material properties of used segments. In the next part a methodics of mesh creation is shown. The mesh quality (in term of elements number and elements shape) is important due to the solution accuracy and speed.
|
|
|
Magnetic fields for biomedical experiments
Otýpka, Jan ; Cipín, Radoslav (referee) ; Patočka, Miroslav (advisor)
In this work deals with magnetic fields for use in biomedicine. This solution involves the choice of the correct geometric arrangement of coils for generating magnetic field with a homogeneous distribution of magnetic induction of the widest possible area. The paper compares thre traditional types of coils, solenoid, toroid and Helmholtz coil. For Helmholtz and solenoid coil and is then carried out an analysis of the magnetic flux density in the inner space. Next part is devoted to electrical resonance in the LC circuit. This is then utilized for the development of pulsed magnetic field in the Helmholtz coil. It summarizes the theoretical and practical knowledge to design and construction of resonant converters. The end is devoted to the measurement of circuit parameters and verification of theoretical knowledge.
|
|
|
Magnetic field analysis with finite element method and magnetic sensor
Volf, Tomáš ; Kurfűrst, Jiří (referee) ; Skalka, Miroslav (advisor)
The magnetic field analysis by MKP and magnetic probe project deals with magnetic field analysis of asynchronous machine cross section. This analysis is written in detail along with the necessary theory of asynchronous machine and the ANSYS program. The magnetic field of selected machine is measured by magnetic probe and results are compared with calculation. The next part of thesis is draft of device for the magnetic field analysis.
|
|
|
Stray losses in magnetic material in the end of stator packet
Kopecký, Ivo ; Skalka, Miroslav (referee) ; Ondrůšek, Čestmír (advisor)
This thesis examines the magnetic field and magnetic flow at the end of the stator synchronous machine. This problem is solid using nonlinear magnetic resistive network, which is simulating by PSpice software. A simple model of stator, consisting of stator plates, air gaps and the two-thumbs, which hold the stator together. All of this is replace magnetic nonlinear resistive network, which is then divided into elements. According to these element is a simplified model solid and analyzed.
|
|
|
Simulation of toroid coils in Ansoft Maxwell 3D
Daněk, Michal ; Pfeifer, Václav (referee) ; Hanák, Pavel (advisor)
The master thesis is focused on the simulation of the toroid coils in Ansoft Maxwell 3D software, which uses finite element method for electromagnetic field simulation. Firstly the process creation of the geometric model toroid coil with seventy-five threaded is presented. It is necessary to debug this model and prepare it for the mesh generation. Physical properties are assign to this model and it gives rise to the physical model. We will set boundaries, excitation current, core material, winding material and the parameters for the mesh generations. New material Kashke K4000 will be created in the materials library and subsequently we will define its BH curve on the basis of datasheet. Analysis is made in two modes. Direct currents (7,5A; 10A; 15A; 20A; 25A) and (non)linear materials are used in magnetostatic solution. Toroid coil is excited by current pulse in transient solution. In Ansoft Maxwell Circuit editor a source which generates current pulse will be created. This excitation will be assigned to the toroid coil as an extern source through a terminal. Core material is linear in the case of transient analysis, because Ansoft Maxwell 3D doesn´t allow to use nonlinear material in this solution. Settings are different in transient and in magnetostatic analysis. End time and time step are entered to solve this task in transient analysis. Time points are entered too. Flux density and electromagnetic field strength are calculated in these time points and later it will be possible to view the results. Calculated fields are shown as the pictures in this thesis. The procedure how to use a field calculator in the postprocessing is given as well. The achievements are summarized in the conclusion.
|
|
|
Optimalization of vibration microgenerator
Kurfűrst, Jiří ; Hadaš, Zdeněk (referee) ; Ondrůšek, Čestmír (advisor)
The article describes how to produce energy necessary for sensor supply. These generators are used as a local source operating on vibratory principle. Mechanical vibrations that occur in moving machines, in nature etc. are used in order to gain required energy. So are kinesis principles and analysis employed in some of the avaible generators. It also contains patent and literary background research. Work is oriented to solving mechatronic perimeter, in the concrete micro - generator. Mechatronic perimeter piles from seat power control parts and mechanical parts, where common solving equation system leads to correct solving. Mentioned analyses be of consequence for usage optimization methods artificial intelligence. Optimization method are used on optimum solving proposal micro - generator. To inquest dynamism system was used program Simulink (part of MATLAB), generator is buckthorn for f = 17 [Hz] acceleration yam = 0,5g [ms-2]. As a algorithm is used SOMA – All to one.
|
|
|
The detection of the rotation direction of a fuel pump
Matějásko, Michal ; Vejlupek, Josef (referee) ; Grepl, Robert (advisor)
This thesis describes the design and commissioning of a device for detection of the rotation direction of a DC fuel pump. The rotation direction is calculated on the basis of change of magnetic field during its movement. Detection of the rotation direction will be applied in manufacture at possible supply cables confusion testing. Thesis is carried out in cooperation with industrial partner.
|
|
|
Design of Electromagnetic Part of Vibration Power Generator for Low Frequency
Konrád, Libor ; Březina, Lukáš (referee) ; Hadaš, Zdeněk (advisor)
The project deals with contemporary position of vibratory generators based on electromagnetic principle and optimal constructional solving of electromagnetic part of generator. Practical part is searching for suitable solving of construction of electromagnetic part of vibratory generator in the light of required power. Solving is brought to effect by the simulator simulation. Vibratory generator works in frequency range 17Hz. Final suggestion has to answer requirements of observance of frequency ranges, minimal power and simple production. Project includes simulation model as well as proposal of final form of modified generator.
|
guest ::
