| |
|
Monitoring shifts of the rock block "Hřebenáč" in the Moravian Karst
Geratová, Patrícia ; Kašpar, Karel (referee) ; Šváb, Tomáš (advisor)
The bachelor thesis deals with the monitoring of horizontal and vertical movements of the rock formation "Hřebenáč". The monitoring was conducted in order to assess visitor safety in the area, for the formation is located near the entrance to the cave and is popular with climbers. Before conducting the monitoring a survey network was created and points of contact located on the formation face. The monitoring was carried out in two stages using a trigonometric and a levelling method. The data obtained in individual stages were balanced, transformed and compared. The results of the thesis will be provided to the administration of the protected landscape area CHKO Moravský kras.
|
|
Fotovoltaics systems for block of flats
Krška, Lukáš ; Charvát, Pavel (referee) ; Hejčík, Jiří (advisor)
The aim of this work is identification with photovoltaic systems for a panel building and finding a solution how to apply it. The work deals with history of photovoltaics, focuses on natural conditions in the Czech Republic and a briefly describes particular components which photovoltaic system consists of. The panel building is divided into parts were is possible to use the system and further is in detail described the Evalon-Solar product which is optimal to use on flat roofs of panel buildings.
|
|
Driven roller conveyor
Pokorný, Pavel ; Kašpárek, Jaroslav (referee) ; Pokorný, Přemysl (advisor)
The thesis describes design of driven roller conveyor for transport products on Euro pallets of a total maximum weight of 600kg. The design includes determination of the respective sizes, capacities and strength, as well as design of a support frame and final strength control in the most affected areas. The thesis also contains documentation with drawings of complete conveyor, section of the conveyor and last section of the conveyor.
|
|
HRSG with two pressure levels,137,4kg/s, 569°C
Šmejkal, Petr ; Kohout, Přemysl (referee) ; Skála, Zdeněk (advisor)
This thesis deals with thermal calculation and design of proportions and layout of calorific components of a heat recovery steam generator according to given output parameters of steam and input parameters of flue gas. Furthermore, the proportions of boiler drums and irrigation and transfer pipes are designed and draught losses are calculated.
|
|
Okříšky bypass - location study
Vidlák, Pavel ; Sabadáš, Petr (referee) ; Radimský, Michal (advisor)
The aim of this master´s thesis is to design version of bypass of small town Okříšky, which is located in Vysočina district. The design of the route is expected to be 3 kilometers long. The goal is to design horizontal and vertical solution of the route, which begins on projected part of the road II/405 aprox. 2 kilometers behiond Zašovice village and continues around small down Okříšky in the direction to Třebíč, where the road connects to existing road II/405. The road will be designed so that costs of the design and subsequent realisation will be minimized. And also environmental impact will be taken into consideration. The project documentation will be used as study in relation to construction of road II/405.
|
|
Detached house, Kuřim
Sedláček, Jan ; Kalužová, Alena (referee) ; Müller, Jan (advisor)
The subject of this work is the solution of a detached family house in the village Kuřim. It is a cellarless, two-storey building with a covered parking place for one car. The Shape of the building is rectangular with single cased flat roof. The house is situated in gently sloping land mainly in the area of houses. The main entrance to the building is situated on the west and the entrance to the site from the north. The lighting and ventilation of all rooms is provided by windows. Horizontal and vertical main structures of the building are designed of the building system Heluz.
|
|
Heat Recovery Steam Generator with Two Pressure Levels
Smolinský, Petr ; Kohout, Přemysl (referee) ; Lisý, Martin (advisor)
This master‘s thesis deals with the design of horizontal heat recovery steam generators (HRSG) with two pressure levels after a combustion turbine. In the introduction part is performed thermal calculation and proposal of a heat transfer surfaces. Furthermore, are suggested dimensions of the drums and pipes for flooding and transferring. The emphasis is placed on the fulfillment the required parameters of steam and flue gas at HRSG outlet. At the end is calculated loss of boiler draft and made technical documentation a drawing of the boiler.
|
|
Horizontal screw conveyor
Švec, Milan ; Malášek, Jiří (referee) ; Kašpárek, Jaroslav (advisor)
The focus of this bachelor thesis is construction, technical solution and design of a horizontal screw conveyor with purpose of transporting agricultural grain as per set parametres. The scope of this thesis includes calculations regarding the main parts of screw conveyor, designs of electric motor, clutch and bearings and a firmness check of the functional parts The body of the thesis is composed from a technical report and drawing documentation, supported by model assembly created in 3D CAD system, as well as a drawing of the entire device, a drawing of the screw and individual drawings of shafts.
|
|
Headstock and tilting head of a milling multi-purpose machining center with a horizontal spindle axis
Vazovan, Ľubomír ; Marek, Tomáš (referee) ; Marek, Jiří (advisor)
The thesis contains of draft, calculations, CAD model and drawing documentation of the moltifunctional machining center with horizontal axis of spindle. This thesis is one of the four parts with which connection ensue the machine-tool. In the first part of my work, there is a constructional draft of the headstock which will enable milling, turning and drilling. In the introduction of this part is headstock research which is solving the most important parts of the headstock of machine . Consequently, technical calculations are acoomplished. Based on these calculations, a specific constructional draft of the headstock is crafted. In the next part of my work, I do research in the area of removable paring milling heads. After this part, there are technical calculations and the specific constructional draft. In the entire work, there is emphasis put on simplicity and functionality.
|