|
| |
|
|
Evaluation of ecotoxicity of selected chemicals with using algal test.
Kosárová, Hedvika ; Pavlovský, Jiří (referee) ; Doležalová Weissmannová, Helena (advisor)
This bachelor thesis deals with the ecotoxicity of 2 - [(2,6-dichlorophenyl)aniline] benzene acetic acid (diclofenac), ?-methyl-4-(2-methylpropyl) benzene acetic acid (ibuprofen) and mixture of cadmium and diclofenac and studies the above using algal toxicity test in accordance with ISO 8692. The theoretical part describes the issue of pharmaceuticals in the environment, and characteristics of standards algae tests and alternative tests. Freshwater green algae Desmodesmus subspicatus were used as testing organisms in all the implemented algal toxicity tests. By the means of these tests, the IrC50 values for the standard substance potassium dichromate, the drugs diclofenac and ibuprofen and cadmium were determined. The toxicity of cadmium in mixture with diclofenac was also evaluated.
|
|
| |
|
|
Nonconventional Utilisation of Wind Energy
Zajíc, Josef ; Turek, Vojtěch (referee) ; Jícha, Jaroslav (advisor)
The thesis considers utilization of the wind energy as source of energy for the production of hydrogen. In the first part, there is described the types of wind engine specialized especially on screw wind engines and their construction. After that follows the description of dilemmas usage of electric energy addicted in time and with it connected problems with accumulation elektricity by the help of various methods. The final part of the thesis is than addicted to statistic evaluation of wind conditions, description and suggestion of the equipment hydrogen management.
|
|
|
Continual double-helicoidal mixer
Černý, Jan ; Malach, František (referee) ; Malášek, Jiří (advisor)
This work focuses on the process of mixing particulate materials and the design of the screw mixer for this activity. The theoretical part describes the mixing and properties of particulate matter. Subsequently, individual devices serving for different types of mixing are analyzed. The practical part contains calculations of the main dimensions and the required power consumption. The choice of suitable drive, bearings and gear is followed. Finally, the analysis of the blade shaft load and the strength analysis of the mixer blade using Autodesk Inventor are performed. Part of this work is enclosed drawing documentation of equipment assembly and selected partial components.
|
|
|
Particle separation from fluid flow
Fejta, Vojtěch ; Urban, Ondřej (referee) ; Štigler, Jaroslav (advisor)
This bachelor thesis deals with the particle separation from fluid flow. The aim of this thesis is to get acquainted with the already existing methods of separation, to study their principles and to describe devices designed for particle separation. The thesis is divided into two main units, the first explains the individual methods of separation, the second describes the specific particle separators, their advantages and disadvantages. The final part of the thesis is devoted to the design of another approach to separation.
|
|
|
Hydrodynamic mixing of water-ask mixture in vessel
Holub, Přemysl ; Franc, Zdeněk (referee) ; Habán, Vladimír (advisor)
Master´s thesis Hydrodynamic mixing of water-ash mixture in vessel is interested in describing fluid and solid particles flow in a vessel. The mixing was conducted in cylindrical vessel by a radial nozzle. The goal of the thesis is to describe flow field and places where the most of the particles are descending according to position, depth, flow rate and nozzle orientation in the vessel. An experiment was conducted in order to investigate and document 8 different positions and orientation of the nozzle. Significant changes in flow fields and mixing time were observed. A mathematical model of the vessel with the nozzle was created in Fluent program. Places with the lowest velocities according to the model were in good agreement with places where the most of the solid particles were descending.
|
|
|
The motorcycle diagnostic unit
Smola, Tomáš ; Šteffan, Pavel (referee) ; Levek, Vladimír (advisor)
This thesis deals with problematics of air/fuel mixture diagnosis od older carburetor motors. Especially for motors with more than one cylinder. In this thesis are informations about commercial product for diagnosis, brief informations about function of CV caburetor and best setup of fuel mixture. The next step in this thesis will be design, construction and testing of device for the diagnosis air/fuel mixture in practical use. Device will be able to measure mixture and other values witch can be used for best carburetor setup.
|
|
|
Design and evaluation of asphalt rubber mixture
Hotař, Petr ; Dašek, Ondřej (referee) ; Kudrna, Jan (advisor)
The aim of bachelor thesis is to design the asphalt concrete for very thin layers using asphalt rubber and to perform laboratory tests according to ČSN EN 13108-2 and TP 148. The work is based on the literature review and respects properties of asphalt rubber. The expected properties of asphalt concretes for very thin layers are summarized and evaluated.
|
|
|
Separation of rigid particles from heterogeneous suspension
Prax, Ondřej ; Debreczeni, Ondřej (referee) ; Pochylý, František (advisor)
The bachelor thesis contains a literature search dealing with the separation of solid particles from a heterogenic suspension. The first part is aimed at separation methods. Then, a chapter follows dealing with separation devices, which are used in waste water treatment plants. A more detailed description of the separator used for the separation of sand from waste waters is part of this paper. The described device serving to separate solid particles from a suspension uses the combination of sedimentation and separation methods. To visualize the separator a 3D model in Autodesk Inventor Professional 9 device was used in the presented paper.
|
guest ::
