National Repository of Grey Literature 120 records found  1 - 10nextend  jump to record: Search took 0.00 seconds. 
Transfer table
Bartel, Jindřich ; Malach, František (referee) ; Malášek, Jiří (advisor)
Diploma thesis deals with the design of transfer table for steel sheets with stroke using screw jacks. The thesis contains a technical balance sheet construction of electromechanical and hydraulic transfer table. The main work is a description of the conceptual solutions and description of selected components. The thesis includes calculations wheel drive and stroke, design and control wheel blocks and traversing chain. End of thesis includes strength finite element analysis with the determination of the maximum stress and strain. The work accompanying drawings.
Adjustable belt conveyor
Drápalík, Martin ; Malach, František (referee) ; Malášek, Jiří (advisor)
The aim of this thesis is to design a conveyor belt readjustable to transport brown coal according to specific parameters. The introduction is focused on describing and dividing conveyor belts and characterizing their individual parts. The main part of the thesis is a description of selected components and design solutions, a functional computation carried out in accordance with the standard ČSN ISO 5048 and further an analysis of transported material's properties. The drafting documentation is attached to the thesis.
Adjustable belt conveyor
Drápalík, Martin ; Malach, František (referee) ; Malášek, Jiří (advisor)
The aim of this thesis is to design a conveyor belt readjustable to transport brown coal according to specific parameters. The introduction is focused on describing and dividing conveyor belts and characterizing their individual parts. The main part of the thesis is a description of selected components and design solutions, a functional computation carried out in accordance with the standard ČSN ISO 5048 and further an analysis of transported material's properties. The drafting documentation is attached to the thesis.
Pendulum jaw crusher 900 x 500
Hladík, František ; Malach, František (referee) ; Malášek, Jiří (advisor)
This diploma thesis is concerned with a construction design of single toggle jaw crusher DCJ 900x500. In the first part, the theoretical background and ways of material disintegration are discussed. The second chapter describes types of material crushers in general, especially jaw crushers and their parts. The third chapter is concerned with calculations and the design of the most important parts of the machine. The fourth part consists of the crusher power calculation, design of the pendulum and its production technology. The last part includes the result of FEM analysis for the particular variant of pendulum production. The thesis also includes drawing documentation of the crusher and the pendulum.
Alternative solution and strength check of mechanical screens
Sommer, Matěj ; Malach, František (referee) ; Malášek, Jiří (advisor)
This master’s thesis deals with a new design of bar screens. The goal was to come up with an alternative design to already existing device by INKOS a. s. In the first part, there is a summary of various machines working in similiar conditions. The insights gained by this research influenced the design of the new device. It utilizes well proven solutions from previous projects, but some of these were reworked and a few new functions were added. Second part of the thesis describes the analytical solutions, which were used to determine the forces in the assembly during the operation of the device. Based on the results of these calculations, a strength analysis of important components was performed using the finite element method. The result of this thesis is the design and optimization of new bar screens, including engineering drawings and tools for its further development.
Solution alternatives of lifting platform
Hájek, Ondřej ; Malach, František (referee) ; Malášek, Jiří (advisor)
The aim of this thesis is to analyze the possibility of mechanical design platform lifts. Proposal lifting platform with mechanical and hydraulic drive with a capacity of 3500 kg and lift 600 mm. The work is mainly focused on design and strength calculation mechanism and structure. Proposal hydraulic circuits and the development drawings for both types of drive.
Mechanical cleaner-machine
Marek, Vlastimil ; Malach, František (referee) ; Malášek, Jiří (advisor)
This master’s thesis deals with design of mechanical screen cleaning machine for wastewater treatment plant, which will be placed in 800 mm wide and 1 850 mm deep intake canal. Thesis includes research of produced systems, construction design, drive unit design and other necessary strength and technical calculations. Thesis is supplemented by drawing of machine and its details.
Project of silo for powdery lime hydrate
Perna, Marek ; Malach, František (referee) ; Malášek, Jiří (advisor)
This diploma thesis is solving systems design of silo for a powdery lime hydrate for technology equipment in a sewage works. There is analysis of type choise and silo construction, dimension design and silo strenght calculation. There is described possibility of empty space creation during the emptying and how to reduse them with the aid of active and pasive elements conductive to flow. Description of active and pasive cases of stress in silo material.
Wood-splitting machine
Důrek, Milan ; Malach, František (referee) ; Malášek, Jiří (advisor)
The master thesis done within the master study programme Transport vehicles and handing machinery presents a design of a wood splitting machine. The first part of the thesis is a literary review focused on current state in the field of wood splitting machines and on the overview of the most common wood species including their technical parameters. In the second part of the thesis, suitable machine components were chosen for the conceptual design of the wood splitter, taking into account predefined parameters. Then a machine frame was designed and its strength was verified by analytical and FEM method. Finally, drawing documentation for the machine, machine frame and splitting tool was created.
Project of silo for powdery materials
Matuška, Michal ; Malach, František (referee) ; Malášek, Jiří (advisor)
This diploma thesis is deals with proposal of silo for various powdery materials. In the thesis is there calculation of type construction, design of the main dimensions and strength calculation of the wall thickness of the silo. There are also described active and passive stress state in the silo and their influence on loading and emptying. Then there is an overview of possible modifications the silo and other possible equipment.

National Repository of Grey Literature : 120 records found   1 - 10nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.