|
|
Single-family house
Ondříšková, Jana ; Leischnerová, Jana (referee) ; Struhala, Karel (advisor)
This work is devoted to the processing of project documentation for a family house. It includes documentation for building permits and technical equipment of the building. The building is designed on a plot with sloping terrain. The entrance to the building is situated on the southeast side. The designed house has an above-ground floor and a residential attic. The roof of the building is gable. The structural system of the house is made of ceramic bricks fittings with a ceramic-concrete ceiling system. The roof is designed in wood with inter-rafter insulation. The technical equipment of the building deals with the concept of electrical installations, heating with a heat pump, sanitary instalations with connection to drinking water and sewage disposal. FVE panels on the roof of the building are designed as a renewable energy source.
|
|
|
Detached house in Svinošice
Nováková, Pavlína ; Kacálek, Petr (referee) ; Petříček, Tomáš (advisor)
This bachelor thesis focuses on the development of project documentation for a detached house with a parlor in Svinošice, Czech Republic. The single-family house sits on a flat plot within the village’s built-up area. The design incorporates a partial basement and two floors above ground. The structure is based on basic passports and the horizontal load-bearing structures are made of reinforced concrete. The roof system consists of a combination of a flat roof and a gable roof. The footprint of the building is 315 m2.
|
|
|
Apartment building
Zápotočná, Jana ; Pilný, Ondřej (referee) ; Brukner, Bohuslav (advisor)
The subject of this bachelor's thesis is the development of project documentation for the construction of a residential building with almost zero energy consumption. The main objectives of this work include the design of the layout, construction, and material solutions. The building of the apartment building is a detached new building, which has one underground floor with garages. In total the building contains 6 studios and 20 apartment units. The fourth floor is partially stepped with access to the flat roof. The building is roofed with two types of flat roofs and one gable roof with 20° pitch. The new building is located in a relatively sloping terrain of the urban area Kňažia, Dolný Kubín, on the plot KN-C 2110/10, which allowed barrier-free access to the building from the garage and at the same time and through the main entrance located on the landing. The facade of the apartment building is designed as ETICS with white RAL 9016 plaster. In the places of loggias and balconies there is a brick facing and in the place of the staircase proposed ventilated facade with cladding with corrugated metal in RAL7016. The windows are designed as plastic, on the exterior side in anthracite RAL 7016 and on the interior side in grey RAL 9006. The residential building is based on a reinforced concrete slab foundation. The basement construction system is combined with perimeter reinforced concrete walls and internal load-bearing columns. In the above-ground floors it is already a transverse wall system, formed by reinforced concrete walls. The construction of the gable roof is made of wooden glued trusses with metal roofing. This bachelor thesis also deals with the assessment of the building in terms of fire safety, thermal engineering, acoustics, glazing and day lighting.
|
|
|
Single-family house in Domanín
Raiskubová, Lenka ; Jechová, Marie (referee) ; Ostrý, Milan (advisor)
The aim of the bachelor's thesis is to develop project documentation for a building permit for a new family house. The new building is situated on the edge of the built-up area of the village of Domanín near Uherské Hradiště. It is a two-story house with a gable roof, a cellar and a garage next to the house. The floor plan of the building is rectangular. The house has 142 m2. The vertical load-bearing wall is made of burnt blocks filled with mineral wool. The horizontal construction system is designed from a prefa-monolithic system. The roof structure on the house is a truss. On the first floor in the northern part of the house there is a vestibule, utility room, bathroom and separate toilet. The living room and kitchen are oriented to the southwest. On the second floor there are two rooms and one bedroom, a common dressing room, a bathroom with a shower and a bath and a separate toilet. 10 photovoltaic panels are designed on the house, which will cover the electricity consumption from May to September. The MVHR is located in the utility room. From the utility room, the wiring is located in the ceiling voids. The system is designed to provide a background ventilation rate of 330 m3/h. The house is heated by underfloor heating supplemented by towel radiators in the bathrooms. The hot water cylinder tank accumulates warm water from the air to water heat pump. Domestic hot water is supplied from a 230l hot water tank. Rainwater will be channeled into a accumulates tank and subsequently used to water the garden. The project includes a thermal and technical assessment of the building, an assessment from the point of view of acoustics and daylighting, and an assessment of the fire and safety solution of the building. The project documentation was developed in the Archicad software.
|
|
|
Family house with office
Křičenská, Michaela ; Pobucká, Slávka (referee) ; Sobotka, Jindřich (advisor)
The topic of this bachelor thesis is the project documentation of a detached house with a business premises – an office. The house is designed in the outskirts od Chrudim. The house has two above-ground floors with a residential attic, it is partly under the basement. The building is covered with a gable roof with a wooden truss. The garage adjoins the house from side. It is designed for two passenger cars. It is covered with a vegetation roof. The house is based on foundation strips made od plain concrete. The main entrance is oriented from the north side, the entrance to the premises is possible separately from the west side or access is possible from the house.
|
|
|
Detached house near Litomyšl
Simon, Matěj ; Kolář, Radim (referee) ; Jelínek, Petr (advisor)
The aim of this Bachelor’s thesis is to design a two-storey, single-family, near-zero-energy house, located in Čistá u Litomyšle. The thesis has two parts. The first part presents architectural and structural design, comprised of technical drawings, fire safety design and building physics. The second part presents a detailed design of sanitary installations a concept design of all the other building services and energy performance certificate. The house is located on a flat plot. It has a gabled roof with a dormer, a pitched green roof over a car shelter and a garden storage connected on the northern side. The ground floor comprises of an entrance, a guest room, a bathroom, a utility room, a living room with a kitchen and a pantry. The private zone is located on the first floor. It is made of a master bedroom with a walk-in closet, an office, two bedrooms, a bathroom, and a laundry room. The vertical structures are made of sand lime bricks, external walls are insulated with Twinner panels- EPS covered by a layer of MW. The roof in insulated with PIR. The horizontal structures are made of cast-in-place reinforced concrete. The house has a foundation slab insulated with foam-glass gravel. The main heat source of the house is an air-water heat pump, supplemented by a stove in the main living area and electric heating elements for hot water. The house is mechanically ventilated by a unit with heat recovery. There are photovoltaic panels installed on the roof. Rainwater is collected from the roof and stored for use in flushing and irrigation. Wastewater is treated by a household wastewater treatment plant, and it is infiltrated on site.
|
|
|
Single-family house
Kapounová, Kristýna ; Kolář, Radim (referee) ; Struhala, Karel (advisor)
The aim of the bachelor´s thesis is to design a nearly zero-energy single-family house. It is located in newly developed area in Ústí nad Orlicí. The thesis is divided into two parts. The first is part of the thesis includes architectural and structural designs and assessment of building physics (acoustic, lightning, thermal parameters) and fire safety, the second part focuses on the design of selected building services and energy performance of the building. The building has two stories and attached garage with workroom which has one storey. The building has gable roof and garage has green flat roof. The main entrance is situated to the north. On the first floor is situated living space of the house with living room connected to dining room and kitchen. Other rooms on the first floor are office, bathroom, toilet, utility room. On the second floor is a private zone where is master bedroom, two children bedrooms, wardrobe, bathroom, and toilet. The building is based on foundation strips made from plain concrete and concrete blocks with steel reinforcements. The walls are design from ceramic blocks and floor slabs are design from prefabricated beams and ceramic infills. The building envelope is insulated with mineral wool. Air conditioning in the house is ensured by a mechanical ventilation with recuperation. Waste water is directed into sewer system. Rain water is stored in an accumulation tank and from there into infiltration blocks, then water is also used for garden irrigation. Hot water is supplied by 200l hot water cylinder. Electricity is secured by photovoltaic panels with storage batteries and second source is public network. Heating is serviced by air-to-water heat pump and secondary source is fireplace with exchanger. Heat distribution is provided by floor heating system.
|
|
|
Energy Efficient Building of a Family House
Palátová, Zuzana ; Wierzbická, Helena (referee) ; Vendlová, Lucie (advisor)
This balechor’s thesis deals with a project of newly designed nearly-zero energy building in Hrachovec. It has two parts – first part presents documentation for building permission which contains drawings, fire safety design, building physics, energy performance certificate and the second part deals with design of building services which contains concept design of all systems. The building has two storeys, rectangular shape, strip foundations, ceramic mansory walls and gabled roof extending over a carport on one side. The ground storey can be entered from carport. There is a kitchen connected with a living room, a bathroom, a toilet, a utility room and a storage room. In the first storey, there are two bedrooms, master bedroom, workroom and a bathroom. Concept design of bulding services contains mechanical ventilation with heat recovery, cooling, water supply, heating, sewage system, rainwater management, electrical installation and design of photovoltaic panels. Mechanical ventilation with heat recovery is located in a utility room. Space heating is provided via air-water heat pump with floor heating. The outdoor heat pump unit is located on southeast side of the building. The indoor heat pump unit is located in a utility room. Space heating in the bathrooms is complemented with towel radiators. In the living room, there is a stove. Electricity is produced by photovoltaic panels and the building is connected to a service line. The building is connected to the sanitary sewer. Stormwater sewer is connected to a stromwater tank and blocks for soaking. The stormater will be used for watering the garden.
|
|
|
Detached house in Opatovice
Řezáčová, Veronika ; Jelínek, Petr (referee) ; Dohnal, Jakub (advisor)
The aim of this bachelor’s thesis is to develop a documentation for building permit of a new-build single-family house. First part of this thesis focuses on architectural and structural design of detached house with separate garage. This part also contains building physics assessment and fire safety assessment. The house has a rectangular shape, two-storeys and it is roofed with a gable roof. On the ground floor, there is a wind lobby, a utility room, a hall with a staircase, a study, a small storage, a living room connected with a kitchen, a bathroom and a toilet. On the first floor, there is one master bedroom with a walk-in wardrobe, a bathroom and three children’s bedrooms. The structural system is designed as masonry composed of sand-lime blocks, external walls are insulated with EPS. Foundations and floor structure are designed as the cast-in-place reinforced concrete slabs and the roof structure is made of prefabricated elements. Second part contains the concepts of building services design and a documentation for building permit for the heating system. The main source of heat is an air-water heat pump. Domestic hot water is also heated by solar panels and the house is heated by floor heating. Ventilation is ensured by a mechanical ventilation unit with heat recovery. Rainwater will be collected in a storage tank and used for watering the garden. An energy performance certificate of the building is also included.
|
|
|
Víchov cider house and cannery
Gulárová, Aneta ; Muroň, Ivo (referee) ; Ležatka, Lukáš (advisor)
This bachelor thesis deals with a new building primarily used for production and storage and secondarily for administrative space. The building is designed in the area of Tachov in the Víchov part of the town of Černošín in the Pilsen region. Access to the land is from the south side of the main road 230 in the direction from Stříbro to Černošín and the second access is from the west side of the dirt road through the village Víchov (the road is currently unused). Both roads are connected by a newly designed road within the plot. The majority of the newly proposed road is used for the supply and removal of goods. The whole concept is designed with respect to the local conditions and referring to the character of the area and also to the investor's requirements. Due to the scale of the village, the height of the building is adapted. The structure of the building is made up of a wall bearing system, where in the part of the administration and warehouses carries a gable roof, which consists of wooden glued trusses. The roof sheathing is made of corrugated metal sheet, which also forms part of the facade. The external façade is made up of timber cladding and cladding made of folded sheet metal. A separate logo was also designed for the building as part of the study, which is located on the front façade of the office building. The proposed building SO.01 will be used as an administrative building for the employees of the cooperage and cannery, who are also part of the production but also administration and management. The building also includes dining facilities for all employees, locker rooms and offices, as well as a showroom for visitors and meeting space for any business meetings of the owner. The building also serves as a representative object of the entire proposal. In the proposed building SO.02 will be located exclusively production or waste warehouse, or warehouse of unprocessed fruit. Dry storage and product storage is not part of the project.
|
guest ::
