|
|
The effect of optical fiber attenuation on the capacity of optical traces
Žák, Ondřej ; Škorpil, Vladislav (referee) ; Reichert, Pavel (advisor)
The essence of this thesis is the creation of complex insight on optic fibre attenuation. There is successive steps explained mechanism of optical attenuation and characterized its spectral dependence. We are describing primary elements of optical attenuation, its sorts and their own spectral dependence. Bachelor´s thesis is explaining requirements of transmission system to spectral characteristic optic fibre and influence of optic fibre attenuation on capacity of optical trace. Output of bachelor´s thesis is program solution of designed mathematical model for calcula-tion spectral dependence of optical attenuation. Program is realized in MATLAB and there is furthermore added version in Microsoft Office 1997-2003. Created program is able to ap-proximate points data obtained from measurement of optic fibre by using Lagrange interpola-tion polynomial and Rayleigh scatter interlay.
|
|
|
New solutions of converters for measurement of current-mode filters
Štork, Petr ; Kubánek, David (referee) ; Jeřábek, Jan (advisor)
This bachelor’s thesis describes some new solutions of differential converters that convert voltage to current and vice versa. Such converters are necessary for measurement of frequency filters in a current mode due to absence of instruments able to mesure signals with current as signal carrier. The goal is to design such converters that should influence gauged frequency properties in a current mode as little as possible. Converters will consist of operative amplifiers with current feedback. Converters designed this way are tested using simulations from PSpice programme, where particularly wideness of band of individual solutions is tested. Simulated solutions that are the most suitable ones are practicably re-enacted and gauged. These resuls of measurement and simulations are compared.
|
|
|
Analysis of methods of measurement of fully-differential frequency filters
Kučera, Tomáš ; Kubánek, David (referee) ; Jeřábek, Jan (advisor)
This bachelor thesis focuses on measurements methods of differential frequency -selection filters with active elements in current mode. Firstly it describes differential frequency-selection filters in current mode and conversions from voltage to current mode. Next the thesis deals with measuring of particular voltage converters to differential current and back from differential current to voltage, which is an integral part for measurements of differential frequency-selection filters in current mode. For design of particular converters there was used program OrCAD there and subsequent simulation was executed in program PSpice.
|
|
|
Implementation of Asterisk VoIP PBX
Schön, Martin ; Münster, Petr (referee) ; Szőcs, Juraj (advisor)
The thesis is divided into two parts, theoretical and practical. In theory, it analyzed the signaling protocols, the RTP protocol for data transmission, VoIP Asterisk PBX and security options. The practical part describes the installation of the Asterisk PBX, conducted demonstration call forwarding. PBX was associated with an LDAP directory server to manage users and ejabberd for text messaging protocol XMPP. It was configured translation SIP-Skype using the SiSky Gateway and with dialplan SIP-H.323 translation. The study was to develop Dialplan with IVR. It was measured bandwidth of the audio/video codecs in an encrypted/unencrypted connections.
|
|
|
Analysis of delay dependence of modern communication services and channels, QoS optimization
Rozman, Jiří ; Szőcs, Juraj (referee) ; Endrle, Pavel (advisor)
The main aim of this thesis is to familiarize with options of services using real-time data transfer in wireless networks. Theoretical part presents wireless network based on IEEE 802.11 standard and its practical use. Large part is focuses on 802.11e standart, that provides support for quality of service in wireless networks. Furthemore this thesis deals with transport and applicaton protocols supporting multimedia streaming over computer network. Second chapter is focused on analyzing real computer network with purpose in measuring parametrs influencing quality of service such as bandwith, delay, jitter and loss. Last part deals with the design of wireless network in OPNET Modeler enviroment with focus on simulating parameters that influence quality of service.
|
|
|
Laboratory device focused on the switched capacitor circuits
Urban, Lukáš ; Šotner, Roman (referee) ; Petržela, Jiří (advisor)
This Master`s thesis is focused on through acquaintance of principles of the function circuits with switched capaticors and posibility of their application mainly in frequency filters or signal generators. The origin of the switched capacitor circuits is mentioned at the beginning of the work. There are references to the first scientific work and scientists who have dealt with this issue. Maxwell`s idea: lossy element (resistor) replace with lossless element (switched capacitor) in electric circuit, is further described. In the next chapter of this work are listed types of switching capacitors and their use in simple RC filters and in structures of inverted or noninverted integrators and their application in more complex higher order filters. The advantages and disadvantages of SC circuits versus circuit composed of discrete components are shown. It is also listed a simple low-pass switched RC filter implemented with analogue multiplexer 4053. Using the LTC1043 integrated circuit, which structure and properties are described and analyzed in detail in the work, the 1st order aktive or pasive low and high pass filters were designed and subsequently simulated in the computer simulator OrCAD PSpice v.10. Another chapter deals with the integrated circuits higher order filters, structure and properties of the integrated filter LTC1060 are further analyzed here. Except this IC there are mentioned integrated filters commercially less available from the corporations Linear Technology and Maxim. The main objective of thesis was to propose and establish laboratory device and laboratory measurment focused on the switched capacitor circuits. The laboratory device has been designed with integrated circuits LTC1043 and LTC1060, which is demonstrated by using passive and active integrator, 2nd order band-pass and 4th order band-pass with Chebyshevovou approximation.
|
|
|
Measuring of data communication parameters in computer networks
Šeda, Pavel ; Hošek, Jiří (referee) ; Skořepa, Michal (advisor)
Master‘s thesis is focused on basic characteristics of data transmissions in computer networks. In forepart I digestedly described basic characteristics computer networks, metods of their measurement and valuation. Computer networks type LAN as well as wireless computer networks Wifi, are mentioned. In second part I realized my own proposition of basic characteristics measurement. This proposition is used for SW applications development. Main goal of these applications is measurement of packet delay, packet jitter, paket loss and available bandwidth. I described details of SW applications and realized measurement of real computer networks in the end.
|
|
|
Quality of service support in unix-like operating system for communication in WiFi networks
Mizera, Josef ; Komosný, Dan (referee) ; Novotný, Vít (advisor)
Diploma thesis is focused on the supporting of Quality of Services in wireless networks, especially in the Linux operation systems. The topic is connected not only with OS, but also with the wireless standard, which supports QoS in wireless networks called IEEE 802.11e. QoS is needed especially for time-consuming data transfers in real time. The theoretical part deals with the theoretical analysis of the issue of the QoS support. There are described parameters, which occurred in quality of services support. This section also deals with the division of services that are used to transmit data across computer networks. It also describes the QoS support in wireless networks according 802.11e, its implementation and methods of accessing a medium with a without possibility of traffic. This part is followed by a description of QoS support in UNIX operating systems. The chapter describes how is the QoS support designed in these operating systems. There are also characterized concrete tools which are used for control the data flow in the operating systems using Linux. At the end the theoretical part deals with different types of queues and methods used in linux OS. In the practical part of the thesis, there are various designed topologies and scenarios to verify the functionality of QoS support in wireless networks using a Unix system. These chapters show the results of different tests at selected transmission data streams that are sensitive to transmission time. There is also verified cooperation of QoS support between devices operating on the network and data link layers. The output of this work is to design a laboratory exercise for the subject Network Architecture. This exercise is focused on familiarization with the QoS support functionality in wireless networks and in Unix-like operating systems. This chapter also describes the devices and programs that are needed to measure this task. The last part of the chapter describes the procedure for the preparation of the measuring station. For this laboratory task, there is an inserted manual in the annex.
|
|
|
Fiber optical transmission system
Horský, Tomáš ; Münster, Petr (referee) ; Dejdar, Petr (advisor)
Bachelor thesis deals with the program processing for the simulation of dispersion on the optical transmission. Parameters of optical fiber, such as attenuation, diffusion, dispersion, and bandwidth are described in the theoretical part. The main focus is on dispersion while being the key parameter of this work. In the practical part, the measurement characteristics of the eye diagram and its analysis are discussed. Simulator of dispersion can serve both for simulation as well as a measuring device for real transmission routes.
|
|
|
A System for Monitoring Status of Network Links via SNMP
Zubčák, Peter ; Trchalík, Roman (referee) ; Rychlý, Marek (advisor)
The goal of the bachelor thesis is an implementation of the system for monitoring status of network links. System collects information from network nodes, from which calculates metrics and statistics, which are available for users in MIB. The communications with network nodes is proceeded by SNMP protocol. The system is implemented in C++ language as a multiplatform service.
|
guest ::
