|
|
Autosalon in Jihlava
Žák, Karel ; Mizerová,, Lenka (referee) ; Smolka, Radim (advisor)
This diploma thesis addresses the project documentation of a autosalon. This building is situated in the region Vysočina, the city Jihlava. Autosalon is projected for a car dealerdealership and a comon administration. Building has two floors. Structure is column beam system. Building is covered with flat roof.
|
|
|
Car dealership with auto repair shop
Wilkonský, Roman ; Vašíček, Vladimír (referee) ; Kacálek, Petr (advisor)
This diploma thesis is being solved for documentation of building in the stage of execution. The building is designed as a showroom with car repair shop. The building site is located in the land registry of Ostrava – Vítkovice. Project documentation is designed accordingly to the valid Czech Republic’s laws, bills and building standards. The building is divided into two objects the first one is showroom with administration and the second one is the car repair shop with washing room and restrooms. These two objects are structurally and operationally connected. The largest plan dimensions are 68,56 x 38,36 m. The building is designed as a reinforced concrete frame in the administrative part and a reinforced concrete wall system in the car repair part. The roof is in both cases realized by using steel trusses. The reinforced concrete frame is lined with aerated concrete masonry. In the roof part it is cladded with sandwich steel panels. The building is founded on reinforced concrete foundation pads with combination of strip foundations. The car repair shop is designed as one floor building, whereas the administrative part is designed as two floor.
|
|
|
Motorshow
Cigánek, Jiří ; Fridrichová, Zdenka (referee) ; Čupr, Karel (advisor)
The thesis project is a two-storey motorshow in Ostrava Poruba. It is a detached building with a second floor just above the ground brick part of the ground floor . The building is designed for sales and service of car . In front of the first floor is a shop with WC intended for the customers. Behind this section is on the first floor the facilities for employees , WC , kitchen, two showers and changing rooms . There is also a quick intake for 2 cars. On the second floor are located the office with separate WC . For this part of the building is the last part of a car dealership and service. Here you will find desktop with three separate workning places , part intended for minor repairs , drive trough car wash , paint shop , utility room and a spare parts warehouse . The structural system of the building consists of a steel construction with reinforcing brick core . The cladding of first floor consists from infill brickwork Heluz 20 with contact insulation system . The cladding of second floor from bearing brickwork Heluz P15 30 with a contact insulation system . The construction of the roof deck consists of single-layer straight roof . The supporting structure is made of concrete slab concreting trapezoidal sheet metal deposited on steel lattice girders. The roof deck is insulated with polystyrene EPS 150S . The waterproofing layer is made of two layers of modified bitumen sheet with reinforcements.
|
|
|
Auto show
Václavík, Marek ; Moravcová, Eva (referee) ; Matějka, Libor (advisor)
This thesis covers brand new detached showroom with one basement and two floors. The building is divided into 2 parts, the major part of the first floor sample room (showroom) for a maximum of 13 vehicles, offices and staff facilities salon. On the second floor is located the finance department and exemplary service area. In the basement of this building are public parking garage for 16 vehicles and car accessories stores. The second part of the new building is just overhead. It consists of a private car service for 5 vehicles, stock tires, utility room, car wash and storage of spare parts for cars. Flat roof supporting structure is made of pre-stressed girders reinforced with cross reinforced concrete slab with insulation. Cladding are ventilated insulated facade, supporting part is reinforced. The showroom form the majority of the building envelope glass facade. Finish of floors in office and showroom premises are ceramic tiles. In the Service and garages cast floor resistant to petroleum substances.
|
|
| |
|
|
The Steel Structure of the Car Schowroom
Pelechová, Denisa ; Šmak, Milan (referee) ; Buchta, Stanislav (advisor)
The master’s thesis treat of design and appreciation load-bearing steel structure of Motor Show. The object is situated on the lokality Brno. Structure is composed of rolling sections and tubes. Overall height of the structure is 17,395 meters and overall lenght is 32,60 meters. Cross link iscomposed of arched girders panel that are supported on fixed pillars. Theoutside links are composed of panel columns. Load is composed of self weight, additonal imposed load, payload and climate load caused by wind and snow that is reached for given locality.Static rewiew comes out from previous load and it has been accomplished by Scia Engineer 2008 and hand computation.
|
|
|
Load-carrying structure of motor show
Náplava, Ondřej ; Barnat,, Jan (referee) ; Pilgr, Milan (advisor)
The theme of this work is design and check load-carrying steel structure of motor show in two variations. A given object is situated in Uherske Hradiste. The steel structure is created by two objects (main and adjoining), whose plans are partly overlaid. Main object has circular ground plan and adjoining object has rectangular ground plan. Building is two-storey. For analysis of internal forces, was constructed virtual spatial model, which was used for an optimization of partial bars for both limit states. The cladding will be made by system of roof panels Brollo and Rockwell. The wall facing will be glass wide, from isolation glasses Stavebni sklo and wall panels Brollo.
|
|
|
Evaluation of the Financial Situation in the Firm and Proposals to its Improvement
Beneš, Marek ; Šmerdová, Dana (referee) ; Zinecker, Marek (advisor)
The aim of this master’s thesis is to analyse the financial health of the Mercedes saloon a.s. company and compares it within one industry, with entrepreneurs and BMW saloon a.s. and Audi saloon a.s., in the period 2005-2009 on the basis of the selected financial analysis method. The thesis consists of two parts, theoretical and analytical.The theoretical section explains the basic concepts and approaches to financial analysis. The practical part is focused on assessment of a financial situation of the selected company by means of partial analysis. At the end there are presented overall evaluation of a financial situation of the selected company and recommendations leading to improvement in problematic areas.
|
|
|
Stteel Structure of Auto Showroom
Sztulová, Petra ; Štrba, Michal (referee) ; Hron, Lukáš (advisor)
Bachelor's thesis solves the design and assessment of the load bering structure of car showroom. The building is a single-storey, rectangular shape with dimensions of 15 x 30 m and a height of 7 m. Structure is formed by the roof cladding, purlins, rafters, columns and perimeter walls of glass.
|
|
|
Communication Strategy of Selected Company
Andrlová, Kateřina ; Zeman, Jiří (advisor) ; Filipová, Alena (referee)
This Bachelor thesis is dedicated on communication strategy of company Ford MotoTrade VM and its goal is an evaluation of this strategy. In the introduction to the theoretical part I occupy with marketing, its definition and brief history. The separate sub-chapter is devoted to marketing mix as the key issue of this work. At the end of first chapter SWOT analysis is described. The practical part is then focused on the company Ford MotoTrade VM itself, mainly focused on the description of her used communication strategy. There are presented results of a survey. At the end of the chapter there are my recommendations based on theoretical knowledge, the survey results and SWOT analysis.
|
guest ::
