|
|
Design of Washing Machine
Jašová, Berta ; Buganská, Tamara (referee) ; Rubínová, Dana (advisor)
The topic of this thesis is design of front-loading automatic washing machine and options to built-in installation and top panel removal. The thesis objective is to simplify and enhance control interface and make the interface ready for colour options. The thesis is divided to analytic portion and accompanying report. The analytic portion describes historical development, existing technical solutions and designs. The accompanying report describes design process since design alternatives evaluation. The final design itself consists of physical form, ergonomic, technical, colour and graphical solutions.
|
|
|
Intelligent double arm juggling machine
Mertlík, Daniel ; Němec, Zdeněk (referee) ; Marada, Tomáš (advisor)
This thesis describes the design and implementation of device called Intelligent two-arm juggling machine. The role of the demonstration project is to control rotational movement of the arm so that the concept of the machine there to swap the ball to the opposite side shoulder. The project is divided into two theses, which this proposal addresses the above mentioned tasks, the machine and place the second level ofcooperative governance through visualization.
|
|
|
Traffic monitoring using Raspberry PI
Zacpal, Michal ; Richter, Miloslav (referee) ; Honec, Peter (advisor)
This thesis describes the design and subsequent implementation of a unit for traffic monitoring using Raspberry PI. First section provides a quick overview of assistance systems, which use a road lane detection techniques. Next there is a description of two diferent methods for road lane detection. Follow the description of monitoring scene. Then the work describe the practical part including the design and realization of supporting electronics, selecting of each components, including the modifying of cameras, mechanical design and creating of unit. Another section is about selection and installation of appropriate software components necessary for running of the unit and the selection of development tools for creating user application. After description of graphical user interafce, there is a description of road lanes detection algorithm. At the end of the thesis is summarized a reliability of unit in real traffic situation. At the appendix there are technical drawings, describing the unit.
|
|
|
Attendance System Terminal
Chmelař, Jakub ; Mráz, Ľubomír (referee) ; Strašil, Ivo (advisor)
This thesis deals with electronic attendance systems which are nowadays being widely used to record employee attendance. General problem of attendance tracking is introduced in first part of the thesis along with a conceptual solution of an attendance system terminal. Author then describes a circuitry and a PCB design of a baseboard for a Cubieboard2 minicomputer, a RFID reader and a touchscreen LCD display. After successful testing of said PCB, the terminal has been completed and it was possible to focus on a software solution. Latter part of the thesis is dedicated to a specifics of the Allwinner A20 platform and its support by a GNU/Linux operating system. In following chapter author describes use of a Buildroot software for creating a Linux based binary image for an aforementioned minicomputer. Since an operating system and a peripheral support were successfully tested author could focus on a design and implementation of an attendance software that is described in the final chapter.
|
|
|
Wireless PC controll
Macháček, Jiří ; Burian, František (referee) ; Macho, Tomáš (advisor)
This work deals with design of PC remote control, which is able to control computer with operating system Windows and Linux using Wifi connection. There was also created necessary support software for both operating systems. Communication was secured by ciphering algorithm.
|
|
|
HMI automatic tester
Lang, Stanislav ; Žalud, Luděk (referee) ; Macho, Tomáš (advisor)
This thesis is dedicated to the automation of tests of the thermostats developed by the company Honeywell. The first chapter presents a problem of self-testing of thermostats, followed by a discussion of possible approaches to solutions. Attention is paid to testing the functionality of the HMI of thermostats, especially to the part of the system, that deals with activation of touchscteen, but no other part of the problem are omitted in the text. Discussions of the problematic passes into the design and implementation of specific design solutions. The selected design of 3D-router, which moves in three orthogonal coordinates and resembles to a coordinate drill for example. First, it describes the basic concepts of mechanic and electronic part of equipment, and subsequently is designed and implemented control electronics for mechanical activator HMI. Each of the electronics components are described in detail and values of parts are based on the calculation with the exception of finished parts. The proposal of the electronics follows the possibility of maximization of universality module for applications in similar applications. The functionality of the electronics is controlled by a microprocessor with a custom program that is described in the work. Source code of some the programs is not available because it is know-how of the company. Next part of the thesis deals with optimization of the moving of axes, optimization is done empirically by measuring. An important issue is compliance with the accuracy required position, also part of the work is devoted to the issue of calibration position. Finally is solved the continuity on the superior system. It is designed and implemented the upper layer of the communication protocol used in the company. Work is the solution of specific corporate award thesis. Although it is a very specific role of the works are generally applicable for other applications. In particular, the proposed electronic represents relatively universal controller for stepper motor control.
|
|
|
Graphics indicator
Dvořák, Roman ; Šír, Michal (referee) ; Bradáč, Zdeněk (advisor)
This thesis is consisting of three parts. In first part was conducted market research and then start preparation concept of project Graphic indicator units using in industrial environment. Creating a basis for continued in making electronic schemes and board. Then the board was made in external specialization company. Then all components were installed. After testing all of function the device was ready for implementation firmware. Firmware was consist of few parts – communication with RS232 protocol, RS485, web interface and last parts is communication with touch display.
|
|
|
Touch screen adaptation for the handicapped
Ochodnický, Ján ; Lambertová, Petra (referee) ; Mácha, Tomáš (advisor)
Thesis describes worldwide operating systems for smart phones with focus on third party application development possibility. Also describes touch control and writing using the virtual keyboard of smartphones. The second part describes the analysis and projection of virtual keyboard with emphasis on ergonomic use for handicapped person. One solution is selected and programmed for operating system Android. Thesis contains complete procedure of application developing, starting with first request, through designing, programming and ending with debugging, testing and release application on Android Market.
|
|
|
The System for Controlled Heating and Roller Blinds in the Building
Brudný, Tomáš ; Macháň, Ladislav (referee) ; Šteffan, Pavel (advisor)
The object of this project was to develop a device, which would by use to coordinate or control device wireless. The system divided to several independent devices, which assure high comfort for the user. The basic unit contains of touch panel which allow the user to control the system. The second unit is used for communication the system with GSM net. The third unit is used to coordinate the system from a PC. This unit makes possible data collection and their evaluation. This unit can as well control and coordinate any devises in the system. Part and parcel of this system are units which are used to drive the end consumers. The hole system is powered from a instead powers supply which is managed from a microprocessor. These devices make it possible, to the system to work without line voltage. The system is designed modular, so in the future it is possible to expand the system of others peripherals.
|
|
|
Design of a supermarket food scale
Švancarová, Jana ; Řezníček, Svatopluk (referee) ; Křenek, Ladislav (advisor)
The subject of this bachelor thesis is to propose new modern design of a food scale, which are used in supermarkets. The final proposal should meet all functional, technological and aesthetic requirements for this type of device. The aim of the thesis is to adapt the overall shape and arrangement of individual components to suit different needs of users, particularly by appropriate ergonomics.
|
guest ::
