|
|
Noise meter and sound detector
Jedlička, Petr ; Novák, Marek (referee) ; Povalač, Aleš (advisor)
This work deals with design and construction of a noise meter, which measures sound pressure level. The device can be set either for weighting filter A or for weighting filter C considering the characteristics of human hearing, the device also allows two modes, fast and slow, depending on the rate of changes of sound pressure level. It tis possible to send measured data to a PC through a measuring application. The noise meter can be powered either by three AA batteries or by a PC through USB interface. The noise meter can be controlled by voice commands.
|
|
|
Code Generation from UML State Machine Description
Píš, Ľuboš ; Richta, Karel (advisor) ; Nečaský, Martin (referee)
This paper discusses the implementation of a suitable algorithm for code generation from UML state machine diagrams. The work includes analysis of state machines described in UML, followed by a description of the input fi le format of the proposed design of the generator and the generator itself. The generator was fully implemented in the work along with other functional requirements. At the end of this thesis is a description of the resulting implementation.
|
|
|
Communication by PLC with peripherals of model elevator
Goryl, Stanislav ; Hynčica, Ondřej (referee) ; Štohl, Radek (advisor)
The theme of this bachelor thesis was to create firmware for internal and external control panel for a model of a lift. Control panels communicate with the upper-level control system via the AS-Interface fieldbus. The base of the firmware is the finite state machine. In the introduction of the thesis, there is a brief description of the AS-Interface bus and the outline of the principle of data transfer. Followed out, is the description of firmware for control panels. Furthermore, there was created a test application for PLC which verifies the functionality of control panels. In the last part, there was produced a manual for the firmware programming, including the construction of untypically involved programming cable.
|
|
|
High Voltage Pulse Generator for Electroporation of Cells
Puczok, Václav ; Martiš, Jan (referee) ; Červinka, Dalibor (advisor)
The main goal of this thesis is to design control board for the experimental electroporation device and to develop control firmware. The first chapter of this work focuses on the electroporation phenomenon itself. Behaviour of the cell model in external electrical field is described there as well as simulation and overview of how electroporation affects living tissue. It also explains the main requirements for parameters of the electroporation pulses as well as need for ECG synchronization. Furthermore, some remarks are given about novel high frequency electroporation method, which involves use of nanosecond bipolar high voltage pulse bursts. The second chapter briefly introduces commercial electroporation device called Nanoknife, including control part, power part, and it's limits. The third chapter consists of introduction of the novel experimental electroporation device developed at BUT. Power part of this device is discussed as well. Next chapter focuses on design of the control board for this device and also on description of the particular schematic parts. There is a control algorithm explanation in the fifth chapter of this thesis followed by the brief manual to machine operation.
|
|
|
Entrance and security systems
Kohut, Michal ; Šedivá, Soňa (referee) ; Fiedler, Petr (advisor)
During writing this bachelor labour I strived to describe some entrace and security systems and their parts. Also some functions and usage of these systems were consecrated and there was introduced their division. I concerned also with observing of preventive exchanges, their properties and operating. The last part describe state machine of security central. It is diveded to 4 smaller state macines which were all tested using IAR visualSTATE program.
|
|
| |
|
|
Stepper motor control using CPLD
Daněk, Jan ; Kolouch, Jaromír (referee) ; Kováč, Michal (advisor)
The aim of my bachelor thesis was the control of CPLD stepper motor. To create a radio controlled antenna rotator. The controlling is done by a computer using RF circuits. The thesis includes a construction and principles of stepper motor. Basic structures of CPLD circuits were applying to create the control circuit. The possibilities of sensing the position and the data storage circuit were discussed. The control program in VHDL was implemented in development boards. The development board is connected to radio receiver circuit and the stepper motor driver. A transmitting board was connected to a personal computer or other device using RS232 interface. Printed circuit boards for transmitter and receiver circuits were created. The PC program was designed for data transmission. The program sends data and communicates via RS232 interface.
|
|
|
Autonomous generator of test scripts
Horký, Stanislav ; Šimek, Václav (referee) ; Kolouch, Jaromír (advisor)
The subject of this master thesis are state machines and their testing. To this purpose, an application is described, which is able to test these state machines autonomously. Application have two parts, first generator and editor of data is built and second part is testing procedure, which is able to test state machines in question and to give corresponding test report.
|
|
|
Tools for Automating the Workflow Processes
Vančura, Tomáš ; Macho, Tomáš (referee) ; Holek, Radovan (advisor)
The the thesis deals with tools for workflow processes automation. It describes in general what workflow is. It also briefly describes tools such as MS BizTalk Server, SAP NetWeaver, IBM WebSphere, ORACLE BPEL. The main part deals with Windows Workflow Foundation. This tool is decribed in detail together with its parts workflow runtime, workflow instances and workflow activities. One part of the thesis is a application, which uses all the possibilities of Windows Workflow Foundation.
|
|
|
Control of sliding window in passenger car
Keprt, Jaroslav ; Vejlupek, Josef (referee) ; Lamberský, Vojtěch (advisor)
This bachelor thesis deals with the installation of power electronics on the PCBdesign and control algorithm for the DC-motor function, which is part of the window motion control system for a passenger car. The paper describes the principles of function state machines that are easily programmed using Stateflow and implementation of control algorithm in the PIC microcontroller. The control program is designed in Simulink and Stateflow its superstructure using Kerhuel Toolbox.
|
guest ::
