|
| |
|
|
Suspension footbridge across the river
Chumová, Petra ; Bartoň, Jaroslav (referee) ; Nečas, Radim (advisor)
The subject of the thesis is to design a suspension footbridge over a river basin. Three different studies were created for the assigned problem. The suspension footbridge was chosen for the thorough elaboration. The most important part of the thesis is the static solution of the supporting structure. The structure model for calculation of impacts of selected strains including the impact of the footbridge construction was created in computational software Ansys. Assessment and dimensioning was carried out using manual calculation according the principles of limit states and applicable standards.
|
|
|
Wind power station tower - calculation
Stein, Pavel ; Vrbka, Martin (referee) ; Nevrlý, Josef (advisor)
The target of this labour is to give summary of contemporary level of construction of wind power station tower. The first part describes importance and progress of alternative sources of energy, especially wind energetic in Czech republic. Next point concerns some construct options of wind power station tower and its basic elements. Close of the work is oriented to modern forms in problems of the wind power station tower and indicates options of modern development.
|
|
|
Sacral Building
Jun, Filip ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
it is a newly built sacral building. The object is projected for a protestant church. The object lies in a town Kutná Hora, on a slightly sloping ground. The object is designed as free-standing building. There is a main gathering space on the first floor and other rooms for the social church life. There are three small apartments and the pastors apartment on the second and third floor. The ground-plan is L-shaped. The object has three sections. The first section is the tower, the second sections contains the gathering space which is orientated to the east and the third section contains apartments and remaining spaces, the main dominant of this section is the indoor built-on gallery. The object is covered with a flat roof. The building is designed from the brick construction systém of BS Klatovy company (concrete fittings)
|
|
|
New town hall for the district Brno-North
Fila, Radek ; Mutina, Petr (referee) ; Jura, Pavel (advisor)
The main architectural motif of the contrast vertical and horizontal. Vertical - a tower that will house the town hall, the dominant element in the area, and therefore represents well the importance of the city hall within the district. This importance is enhanced by the location of the tower on the corner. Calm horizontal volume cultural center follows the street line and thus defines a new public spaces, including a new town hall square. The unifying element of the two buildings is a double facade of white aluminum fins.
|
|
|
CARBON Visitor Center
Ondrová, Simona ; Šindlar, Jiljí (referee) ; Marek, Jiří (advisor)
The work deals with the design of the visitor center in the area of the Frenštát mine, Trojanovice municipality. The proposal is based on highlighting the dominant features of the area under consideration. The goal of the project was to design a distinctive object - a "sculpture" that would provide visitors with spaces for education, lectures and refreshments. The largest part of the building is made up of exhibition spaces, which allow visitors to browse permanent and temporary exhibits related in particular to the issue of mining areas. The exhibition also includes an outdoor exhibition. The dominant feature of the proposed building is the observation tower, which gives visitors a view of the Beskydy Mountains and a closer look at the mining activity.
|
|
|
Fire station in Žamberk
Daníček, Michal ; Ešpandr, Jan (referee) ; Bantová, Sylva (advisor)
The subject of this diploma thesis is the design of the new building of the fire station in Žamberk. The building plot is located on the northwestern outskirts of the city of Žamberk in the street Čs. armády. The fire station building is free-standing and contains two above-ground floors and a tower for drying hoses. On the first above-ground floor, there is a garage for emergency vehicles and associated areas such as a wash box, a technical room with a backup source of electricity, a cloakroom with emergency clothing and washing facilities, fuel storage, a warehouse, a building maintenance workshop, a machine service workshop, sanitary facilities, hose drying and a corridor with a staircase to the second above-ground floor. On this floor, there is an administrative part, a dirty and clean changing room, hygiene facilities, rooms for day and night emergency, a slide to the ground floor, and a room for physical training of fire station workers. The building has a simple shape of two rectangles locked into each other with a distinctive square tower. The object is based on foundation footings and belts. The vertical support system of the above-ground floor is a prefabricated reinforced concrete frame with infill masonry made of ceramic blocks. Horizontal load-bearing ceiling structures are reinforced concrete prefabricated beams with pre-stressed ceiling cavity panels. The roof structure is designed as a single-skin flat roof weighed down by a layer of washed river aggregate.
|
|
|
South Bohemian sacral architecture of the late Gothic 1450 - 1550 in the Rosenberg domain
Lavička, Roman ; Kuthan, Jiří (advisor) ; Jarošová, Markéta (referee)
South Bohemian sacral architecture of the late Gothic1450 - 1550 in the Rosenberg domain Mgr. Roman Lavička A group of late-Gothic churches, which keeps attracting our attention, was built in the Rosenberg domain during the reign of the Jagiellon dynasty. Limited archival material, results of dendrochronologic analyses and preserved buildings suggest that it was mainly building maintenance that was in progress in the Rosenberg domain in the second half of the 15th century. In the early 1480s the building of the new pilgrimage church in Kájov (1471/1474- 1485) was coming to its end. And it was only then that big town parish churches in Trhové Sviny, Dolní Dvořiště, Hořice na Šumavě, Chvalšiny and Nové Hrady started being rebuild or constructed anew almost simultaneously. Around 1485 almost twenty religious buildings were being built in the Rosenberg domain. They reflect the increasing economic prosperity and self-confidence of the town and village municipalities, corporations as well as individuals manifesting their wealth, success and strength. From a formal and ideological point of view it is possible to trace down a group of related buildings directly in this initial phase. They were probably designed by a single architect who is referred to as Master of Hořice presbytery. However, around 1495 we can...
|
|
|
Hranice – redefinition of urban structure
Uherková, Ivona ; Ryšavá, Hana (referee) ; Ponešová, Barbora (advisor)
The diploma thesis Park and Ride deals with the design of a car park in the town of Hranice, which is known mainly for its important transport train node and Hranice Abyss. The city now suffers from the high intensity of car traffic in the city center due to insufficient street network. This network is disrupted by a four-lane road that was built in the 1980s and cut natural transport links. The abolition of the four-lane road, which is now lacking in transport services, releases a large amount of development area, which is primarily used as an agri-recreational area. Part of this green belt is the parking house, which prevents the entry of surplus cars into the city center. The parking house is a new transport hub of the city, which also includes elements of alternative transport - transfer to public transport or bicycle, which makes it possible to create a city center pleasant for pedestrians.
|
|
|
Cable-supported pedestrian bridge
Knotek, Jan ; Brtáň, Stanislav (referee) ; Nečas, Radim (advisor)
The subject of this diploma thesis is design a cable-supported pedestrian bridge. Three different variants of the solution were created for the design. For detailed processing, variant no.2 was chosen - a suspended bridge with a pylon in the middle of the span. The main task is the static design of the supporting structure. The model for the lengthways is created in ANSYS. The SCIA engineer was used to solve crosswise. The assessment and dimensioning was done according to the limit state principles and valid standards.
|
guest ::
