|
|
Apartment Building in Sadova
Pastorková, Michaela ; Nespěšný, Ondřej (referee) ; Pěnčík, Jan (advisor)
The subject of the bachelor's thesis is the elaboration of project documentation for the construction of an apartment building. The building is located in the cadastral unit of Sadová, Brna town. The apartment building has four floors, a full basement with a flat green roof. On the upper floor there are 14 residential units and in the basement there is a common room, a bicycle shed / carriage house and a cellar. The construction of the building is a wall system. Perimeter basement walls are made of reinforced concrete. The load-bearing masonry in the above-ground floors is made of YTONG aerated concrete blocks, the non-load-bearing masonry consists of Silka acoustic lime-sand blocks. The building is designed to be insulated with an ETICS contact facade made of Multipor mineral thermal insulation boards. The ceiling structure is designed as a reinforced concrete ceiling slab. The staircase is also designed as a reinforced concrete monolithic structure. The roof of the building consists of a green flat roof Urbanscape.
|
|
|
Revitalization of multifunctional house in Uhersky Brod
Žajdlík, Tomáš ; Šuhajdová, Eva (referee) ; Šuhajda, Karel (advisor)
The subject of this diploma thesis is the elaboration of the revitalization of a multifunctional building in Uherský Brod. The assignment was the elaboration of the project documentation for the issue of the building permit. This building has four floors and one basement. The supporting system of the building is reinforced concrete frame with brickwork. Ceiling structures are from reinforced concrete primary and secondary beams with slabs. Roofs of the building are designed as pitched roof, warm flat roof and double–skinned roof.
|
|
|
War Museum of the Považie Region
Všelko, Miroslav ; Novotný, Petr (referee) ; Müller, Jan (advisor)
The Master’s thesis solves a design of the modern War Museum of the Považie Region. The building is situated in the centre of Považská Bystrica town. It is the representative four-storey building with flat single roofs, intended for general public use. The object is divided into two main parts. There are museum part and administration part. The museum part is a monolithic reinforced-concrete skeleton with light single facade. The administration part is a masonry construction system and it will serves especially for employees. The thesis containes a project of executive documentation including construction details and other assessments.
|
|
|
Biathlon Complex Facilities
Minářová, Klára ; Juračková, Edita (referee) ; Králová, Zuzana (advisor)
The subject of the thesis is processing of project documentation for the new building of biathlon bleachers and sport facilities. The compound is located in the town of Staré Město pod Landštejnem, situated on a plot of land no.1818/6. The building is detached, designed partly as a double-deck and in the remaining part as four-storey. The supporting structure is designed as a solid reinforced concrete prefabricated skeletal system, supplemented by filling brick blocks. The compound is based on foundation plinths and the bleachers on foundations. The ceiling construction is made up of POD ceramic panels. The roof is designed as a single skin flat roof with the powder of washed river stone, and the roof above the duplex part is designed as a walkable roof with a wear layer of paving on supports. The project was prepared using a computer program AutoCAD. When processing, the emphasis was placed on the correct layout design, architectural design, static requirements and the safe use of the building.
|
|
|
Apartment building
Lukešová, Michaela ; Nespěšný, Ondřej (referee) ; Pěnčík, Jan (advisor)
The subject of the bachelor's thesis is the elaboration of a part of the project documentation for the construction of an apartment building. The apartment building is located in the cadastral area of Opočno pod Orlickými horami. The building has four floors and a partial basement. In the basement of the building are designed cellars, utility room, elevator engine room and air conditioning. On the ground floor there is a cleaning room, a bike shed / carriage house and two residential units. The second and third floors are identical in layout and there are two residential units, on the fourth floor there is a residential unit with a terrace and a common room with kitchen and toilet. A total of seven residential units are designed in the building. Vertical load-bearing and non-bearing structures are made of ground brick blocks, in the basement there are perimeter structures made of monolithic reinforced concrete. Horizontal load-bearing structures are monolithic reinforced concrete, reinforced according to static calculation. The insulation of the building is solved by the contact insulation system ETICS.
|
|
|
Apartment Building in Sadova
Pastorková, Michaela ; Nespěšný, Ondřej (referee) ; Pěnčík, Jan (advisor)
The subject of the bachelor's thesis is the elaboration of project documentation for the construction of an apartment building. The building is located in the cadastral unit of Sadová, Brna town. The apartment building has four floors, a full basement with a flat green roof. On the upper floor there are 14 residential units and in the basement there is a common room, a bicycle shed / carriage house and a cellar. The construction of the building is a wall system. Perimeter basement walls are made of reinforced concrete. The load-bearing masonry in the above-ground floors is made of YTONG aerated concrete blocks, the non-load-bearing masonry consists of Silka acoustic lime-sand blocks. The building is designed to be insulated with an ETICS contact facade made of Multipor mineral thermal insulation boards. The ceiling structure is designed as a reinforced concrete ceiling slab. The staircase is also designed as a reinforced concrete monolithic structure. The roof of the building consists of a green flat roof Urbanscape.
|
|
|
Residential Building
Pastorková, Gabriela ; Mocová, Pavla (referee) ; Mohelníková, Jitka (advisor)
The aim of the Bachelor thesis is to complete the project documentation for the implementation of the residential building. The building has thirteen residential units and consists of four storeys and one underground floor. The building is located in the cadastral area of Brno-Komín in a quiet area. The main entrance is located on the north side of the plot and it is barrier-free. Vertical communication is ensured by a two-arm staircase and an elevator. From the common corridor, there is an entrance to the individual housing units. In the basement there are 13 cellars, utility room, toilet and facilities for a cleaning. On the first floor there is the main entrance to the building, including mailboxes, a bell and the entrance to the pram and bicycle room. From the stairwell, where there is also an elevator, there are three residential units (2x 2+kk and 1+1), one apartment is designed as accessible flat. On the second and third floors there are four residential units (2x 1+1 and 2x 2+kk). On the fourth floor there are two residential units sized as 4+kk. The two-way wall structural system is made of ceramic blocks (in the basement – pre-cast pernament formwork). The whole apartment building is insulated with the contact thermal insulation system (ETICS). The building is based on strip foundations made of plain concrete. The ceiling structure is made of monolithic reinforced concrete slabs and the whole building is roofed with a warm flat roof.
|
|
|
Apartment house
Černý, Martin ; Hrochová, Žaneta (referee) ; Sedláková, Markéta (advisor)
The subject of the bachelor's thesis is the design of an apartment building in Humpolec. It is an apartment building, which has four floors above ground and one underground floor. On the first floor part of the house is designed for administration. The building is built on a slightly sloping terrain and is free-standing. Main entrance with entrance to the collective garage is situated to the southwest, where the existing access road is. Nine different housing units are designed. The construction system is made of ground ceramic blocks. The ceilings are made of prestressed panels and the roof is single skin. The work contains project documentation of the actual implementation.
|
|
|
The administrative object
Kučera, Filip ; Sedlák, Radek (referee) ; Beneš, Petr (advisor)
The final thesis deals with design of new administrative object. The administrative object is located in edge part of Znojmo city. The building is situated in built-up area, which is used for housing and services. The building is accessible as a detached house on a slightly sloping territory. It is a four-storey house with a cellar, terminated by a warm flat roof, which has three-storey and basement. On the above ground floors are located offices and their associated spaces, staff facilities and toilets. On the third floor there is a terrace for employees’ stay in the summer months. On the third floor there is a collective garage with twenty parking spaces too. The individual floors are accessed via the main staircase and elevator. The building is designed as reinforced precast concreate frame and is based on prefabricated reinforced concrete foundation pads. The infill and internal wall are designed from the Porotherm building system.
|
|
|
Apartment building
Malina, Tomáš ; Kvapilová, Vendula (referee) ; Daněk, Lukáš (advisor)
This bachelor thesis deals with the elaboration of project documentation of the construction of the Apartment building in the Kroměříž. The object has an atypical shape composed of two squares. Apartment building is designed for 32 people. The building is designed as a four-storey and house with a cellar. On the underground floor there are storage areas, technical backgrounds and free times activities. On the first floor is a main entrance and two flats, on the second to four flor are just flats. The building is bricked from brick block with filigree floor slab and with a flat roof.
|
guest ::
