|
Zalužanský Brook Restoration Project
Lašek, Jakub ; Kalibová, Jana (advisor)
This thesis contains restoration project of chosen section of Zalužansky brook in Ústecký kraj. Project is processed at the level of documentation for territorial management according to decree no. 499/2006, of buildings documentation. Theoretical part captures professional literature research dedicated to restorations, spatial planning and buildings documentation. Analytic segment closely defines and characterise location of interest at first, although major part consists of designed restoration measures following requirements for creating a building documentation by mentioned decree. Benefit from this thesis is it's possible usage as a background material for documentation created by authorised engineer for water management and landscape planning.
|
|
Design of Experiment for Non-Stationary Processes of Production
Jadrná, Monika ; Macák, Tomáš (advisor)
The doctoral thesis is concerned with the services sector and the area of mass production. Particularly, the optimization of the product portfolio of the travel agency and the optimization of production rounds of ammunition.
The theoretical part deals with the current overview of discussed topic. Further, the terminology and methods of the decision-making process are defined to support decision making. The theoretical basis of research focused on the choice of appropriate input variables in the area of services, and on the choice of a particular material option in the production area and appropriate equipment for the production. The theoretical part forms the basis for the practical part of the thesis.
For the doctoral thesis was chosen an enterprise operating in the defined sector. Product portfolio for the services sector is optimised using Fuzzy logic and Fuzzy sets so that the enterprise can maintain its competitiveness in todays highly ambitious market. Product portfolio for manufacture is optimised for achieving desired properties of the product.
The main aim of the thesis is to propose a new methodological approach for the management of selected business processes in their nonstationary time course. The aim of the practical implementation is to verify the functionality of the proposed methodological approach, both in the area of services and in the field of mass production.
|
|
Ammonia and Ammonium Nitrate in Archives
Mašková, Ludmila ; Smolík, Jiří ; Ďurovič, M. ; Součková, M.
Ammonia in libraries and archives can damage stored materials such as pigments and metals (Grzywacz, 2006) and mediate microbial decomposition (Petushkova and Lyalikova, 1986). The aim of this study was to investigate concentrations and sources of ammonia in the indoor air of five different types of archives, and to establish the relationship between the indoor and outdoor environments.
Fulltext: content.csg -  PDF
Plný tet: SKMBT_C22016102412240 - PDF
|
|
Properties of Aerosol, Produced by Laser Ablation of Standard Materials for ICP-MS Analysis.
Holá, M. ; Nováková, H. ; Ondráček, Jakub ; Vojtíšek, M. ; Kanický, V.
Laser ablation (LA), together with inductively coupled plasma mass spectrometry (ICP-MS) as a detection system, has become a routine method for the direct analysis of various solid samples. The product of laser ablation contains a mixture of vapour, droplets and solid particles. All components are finally transported to a plasma by a carrier gas as a dry aerosol including mainly agglomerates of primary nanoparticles. In general, characterisation of aerosols by their particle size distribution (PSD) represents indispensable tool for fundamental studies of the interaction of laser radiation with various materials. The particle size distribution of dry aerosol originating from laser ablation of standard material was monitored by two aerosol spectrometers – Fast Mobility Particle Sizer (EEPS) and Scanning Mobility Particle Sizer (SMPS) simultaneously with laser ablation - ICP-MS analysis.\n
Fulltext: content.csg - PDF
Plný tet: SKMBT_C22016102412241 - PDF
|
|
Time lapse tomography of fracture progress in silicate-based composite subjected to the loading a combination with acoustic emission scanning
Kumpová, Ivana ; Kytýř, Daniel ; Fíla, Tomáš ; Veselý, V. ; Trčka, T. ; Vopálenský, Michal ; Vavřík, Daniel
The initiation and propagation of a fracture in quasi-brittle materials (such as silicatebased composite) is an increasingly discussed topic for which various methods of research have been developed/applied. As the quasi-brittle silicate-based composite compounds are very non-homogenous, the mechanism of the crack initiation and propagation can be very different even for samples with the\nidentical geometry. One possible approach to study the fracture mechanism in quasi-brittle materials is to use several different experimental techniques in a single experiment and perform detail analysis to identify generally valid fracture process phenomena. In this work, a simultaneous monitoring of fracture\nprocess zone formation and propagation by three different methods is presented and discussed. A three point bending test was performed on a notched silicate composite specimen. During the loading process, a highly accurate force displacement dependence was recorded accompanied with X-ray radiography,\nX-ray computed tomogra-phy and acoustic emission scanning.
|
|
Corrosion behavior of plasma coatings CuAl10 and CuAl50 on magnesium alloy AZ 91
Kubatík, Tomáš František ; Stoulil, J. ; Stehlíková, K. ; Slepička, P. ; Janata, Marek
The most common magnesium alloy AZ 91 is widely used as a structural material, but its use is limited at higher temperatures and high humidity. Plasma spraying is a technology that allows to prepare protective metallic and non-metallic coatings on a wide variety of substrates including magnesium and its alloys. In this study, CuAl10 and CuAl50 were plasma sprayed on magnesium alloy AZ 91 with the aim to study corrosion resistance of the plasma sprayed coatings. The corrosion resistance of layers was evaluated by the method of electrochemical potentiodynamic measurement as well as long-term corrosion tests in a condensation chamber with 0.5 mol\nNaCl at the temperature of 35 °C for 1344 hours. Layers with 1, 2, 5 passes and passes of CuAl10 with the thickness ranging from 75 to 716 mm and CuAl50 with the thickness ranging from 64 to 566 mm were prepared. The increased corrosion velocity was observed in the case of thin layers of 2 and 5 passes due to the development of a galvanic corrosion couple. The CuAl10 layer prepared with ten passes has an outstanding corrosion resistance.
|
|
Possibilities in monitoring of laser welding process
Horník, Petr ; Mrňa, Libor
With increasing demands on the quality of the welds, it is usual to apply automated machine welding with monitoring of the welding process. The resulting quality of the weld is largely affected by the behavior of keyhole. However, its direct observation during the welding process is practically impossible and it is necessary to use indirect methods. At ISI we develop optical methods of monitoring the process based on analysis of radiation of laser-induced plasma using Fourier and autocorrelation analysis. Observation of keyhole inlet opening is partially possible through a coaxial camera mounted on the welding head and the subsequent image processing. A high-speed rear camera to understand the dynamics of the plasma plume. Through optical spectroscopy of the plume, we can study the excitation of elements in a material. Shielding gas flow can be visualized using schlieren method.
|
|
Study of dielectrical properties of organic material thin films
Pospíšil, Jan ; Boušek, Jaroslav (referee) ; Mikula, Milan (referee) ; Zmeškal, Oldřich (advisor)
The dissertation is focused on the study of electric and especially dielectric properties of thin film organic materials with their huge potential for optoelectronics and other industrial sectors. The theoretical part deals with the use of organic materials in organic photovoltaic cells, the methods of deposition techniques and characterization. The theoretical knowledge of the dielectric spectroscopy, including methods for determining the physical properties and evaluation of experimental data are also described. The experimental part is devoted to the study of small molecule organic solar cells with bulk heterojunction composed of electron donor molecule of DPP(TBFu)2 and electron acceptor fullerene derivatives, such as PC60BM, PC70BM and TC60BM. The experimental part is divided into two main parts. The first part deals with the study of processes occurring at the interface between the active layer and the contact; the second part is focused on transport processes inside the structure of photovoltaic cells and also contains a study of perovskite solar cells.
|
|
The impact of executing new thermal insulation on a apartment building on the expenses associated with its operation
Machová, Petra ; Kosová, Jaroslava (referee) ; Čech, Josef (advisor)
The topic of the diploma thesis „The impact of executing new thermal insulation on a apartment building on the expenses associated with its operation “ is a draft and appraisal of four variants of thermal insulation of the building. The thesis deals with the assessment of the current proposal for apartment building envelopes along with proposing alternative plans with emphasis on reducing heating costs. The first section describes the types of buildings according to heating demand and a list of different variants of thermal insulation materials. The second part is devoted to a specific apartment building in the Ústí nad Labem for which there are designed in four variants of insulation. The work includes thermal assessment in original condition and the assessment of new condition modified by adding thermal insulation. Through research will bedetermined price of implementation of proposed insulation options together with the costs of operation of the apartment building. In conclusion, the diploma thesis evaluates the payback period of insulation.
|
|
Design of leg for crash test dummy
Maršálek, Petr ; Semela, Marek (referee) ; Bilík, Martin (advisor)
This thesis is devoted to the design model of the lower limbs crash test dummies. It describes how the dummy developed historically, what are currently available for crash tests, what they are made and what their future will be. The main motive of the work is to design a model of lower limb for crash tests, with emphasis on the human anatomy. The work is characterized by how the figurine is produced using the form from material Thermolyne Clear, wood as a substitute human bones and the agar substitutes such as human muscle.
|
guest ::
