|
|
Control system for cantilever gates
Koždoň, Ondřej ; Arm, Jakub (referee) ; Bradáč, Zdeněk (advisor)
The goal of this bachelor's thesis is to design a battery powered control system for wireless controlling swing gate (may be used for cantilever sliding gates or garage doors). This system is designed as a small electronic system with necessary Inputs/Outputs (I/O) and an Input for charging a battery from solar cells. The result of this bachelor's thesis are two main PCBs with dimensions of 5×5cm for controlling the gate and remote controller with dimensions of 2,3×4,4cm. Main PCB allows adding more remotes, deleting all remotes and modes for the way of controlling the gate (opposite direction, open only, close only, open wing, close wing, stop the gate) and selecting Master/Slave gate. Communication works on frequency of 434MHz.
|
|
|
Wireless thermostat
Králíček, Martin ; Viščor, Ivo (referee) ; Kincl, Zdeněk (advisor)
The Master’s thesis discusses wireless thermostat for a control boiler. In order to complete the project we have to design and realise the whole project with software design. The system contains two units, a master control and a measurement of regulation units. The project initially talks about regulation of heating systems for family houses and larger buildings like schools and stores for example. Next, the project describes the control and regulation units and their potential extension for effective and economical operation. Both units are equipped with microcontrollers, which these control each of function. The communication between both units is provided by wireless interface in free radio band ISM. There is a user interface for the master control unit’s regulation process. The measurement and regulation unit has only the possibility to switch between manual and automatic control for regulation of heating system.
|
|
|
Wireless Controlled Car Model
Miklíček, Marek ; Růžička, Richard (referee) ; Šimek, Václav (advisor)
This Bachelor thesis focuses on suggestion of solution for remote control of a car model which will be operated by Android software. Part of this thesis is description of optinal witeless communications, suggestion and realization of hardware adjustments and creation of software which is necessary for operating the remote control.
|
|
|
Driver and Hardware Module of MiWi Protocol for Linux
Hala, Martin ; Kořenek, Jan (referee) ; Novotný, Tomáš (advisor)
The master's thesis is about a communication element - a hardware module, its design and implementation. The communication is to be maintained between a Linux embedded device and the sensors elements, using the MiWi protocol. The task is part of the IoT project, developed at FIT BUT. Furthermore, the paper describes design of a driver for the module, its likely solution, as well as the very implementation. Finally, the obtained experience is discussed in a summary, along the next step options on how to proceed further with the driver development.
|
|
|
Automated Formal Verification of Program Correctness Using SDV, Copper, or Similar Tools
Kovalič, Peter ; Šimáček, Jiří (referee) ; Vojnar, Tomáš (advisor)
This thesis is concerning about verification of drivers. Principally is focused on model checking tools, from which the Static Driver Verifier is the most important. A driver Ext2Fsd is checked by this program. This driver belongs to group of file system drivers. Control is driven by entered rules, which the driver must not violate. The aim of this thesis was to verify chosen driver by selected tool. The results have covered all three types of verification´s end. There were rules that driver passed, that driver violated and also that driver didn´t accept. The final chapter of work is about another model checking tool Copper. It offers the basic knowledge about this program.
|
|
|
3D Scanning with Proximity Planar Scanner
Chromý, Adam ; Burian, František (referee) ; Žalud, Luděk (advisor)
Tato práce popisuje konstrukci skenovacího systému pro tvorbu trojrozměrných modelů. Kombinace laserového scanneru a robotického manipulátoru tvoří velice flexibilní zařízení schopné snímat jak velké, tak malé a detailní objekty. Zařízení nachází uplatnění v mnoha aplikacích, zejména v lékařství, kde přináší řadu nesporných výhod proti stávajícím systémům. Práce popisuje mechanickou konstrukci zařízení, funkční principy a jeho kalibrační proceduru. Součástí práce je i software pro vizualizaci naměřených dat a jejich zpracování do podoby modelů se stínovaným povrchem. Výsledkem práce je funkční zařízení a rozsáhlý obslužný software.
|
|
|
Monitoring and Analysis of Users Using DLP System
László, Peter ; Janoušek, Vladimír (referee) ; Drozd, Michal (advisor)
The purpose of this work is presenting Data Loss Prevention systems, describing each element of it and writing down advantages and disadvantages of these systems. This document contains required knowledge about filter drivers and I/O request packets. According to this knowledge it is possible to design a user application, which based on the principles of Data Loss Prevention systems is able to prevent sensitive data from leaks. Created application is a mini-filter driver, which allows tracking operations of marked files with monitoring and filtering IRP packets. This document also contains detailed desing, implementation, testing and reviewing of created program.
|
|
|
Analysis of Attacks Using Web Browser
Olejár, František ; Michlovský, Zbyněk (referee) ; Drozd, Michal (advisor)
Different attacks guided from web servers using web browsers are being analyzed and described in this Bachelor's thesis. A simulation environment is used to simulate the attacks. The environment was created using Browserider, using the web server Apache 2 and a virtual machine as well. On the basis of the analysis, the application ExploitAnalyzer was developed and implemented and can successfully record process's actions as well as IRP requests sent during an attack onto a web browser.
|
|
|
Communication driver and simulater for Mettler Toledo weight in STEP7
Přichystal, Vít ; Janda, Karel (referee) ; Pásek, Jan (advisor)
In the beginning of the thesis I mention a list of PLC programming languages. The thesis itself deals with a problem of implementing a driver for Mettler Toledo weight terminal,concretely the type IND560. Moreover, the simulator of this terminal is created (the terminal itself was not available). For the implementation, the language scl was used, together with the Siemens company software. At the end of the thesis, I created a visualization of the project.
|
|
|
Control system for cantilever gates
Koždoň, Ondřej ; Šťastný, Ladislav (referee) ; Bradáč, Zdeněk (advisor)
In this bachelor's thesis is designed and in detail described a battery powered control system for wireless controlling swing gate. This system is designed as a small electronical system with necessary Inputs/Outputs (I/O) an Input for powering from solar cells and it is equipped with requisite software.
|
guest ::
