|
|
Holiday Resort near Water Reservoir Král´ová
Varjú, Marián ; Melcr, Petr (referee) ; Fišarová, Zuzana (advisor)
The subject of the diploma thesis is design a new building with a camping in the village Šoporňa. The building is situated near the river Váh on flat terrain. Emphasis was placed on the total visual impression of the building on its stand out from the surrounding landscape. The building will serve as a recreation building with the possibility of short and long-tern housing. There is a restaurant with outdoor seating and an accommodation capacity for 90 people, trade with sport equipment, service for vehicles and boats, garage for boats, a 11,6 metres high climbing wall, conference rooms and halls for exercise. The building has three floors above and no basement. The project includes a flat roof with an attic.
|
|
|
AUTOCENTRUM VW GROUP MIKULOV
Běhůnek, Ondřej ; Hudeček, Vladimír (referee) ; Dýr, Petr (advisor) ; Kacálek, Petr (advisor)
The subject of the bachelor's thesis is the elaboration of project for the building permit and for the construction of the VW Car Centre in Mikulov. The documentation follows the study maked during the summer semester of the academic year 2019/2020, within the AG033. The aim of the study was to develop an available, functional, and architectural solution. The bachelor's thesis elaborates this study in detail. The building site is in South Moravia, on the northwestern edge of Mikulov in the former collective farm. The building is connected to the local road by Jiráskova Street, two entrances, connected by an asphalt road around the building. Around road, there are parking areas for visitors and employees, as well as parking areas for serviced vehicles and vehicles intended for sale. The building is divided into several functional units, especially the sale of new cars, with administrative, sale of spare parts with a handy warehouse and authorized service, with facilities for employees and a spare parts warehouse. These units are reflected in structure, consisting of three blocks, different in height, adapted to the requirements for traffic height. In the first, one-floor block, there is a car shop, in the middle, two-floor block, storage and sale of spare parts on the ground floor, the administrative on the second floor. In the third block is the service. The parts are interconnected and thus form one continuous object. From an architectural point of view, the building is based on the surrounding industrial buildings and is flattened with a titanium-zinc overhanging perforated shell. The sun exposure of the building is ensured by curtain walls on the sides of the building, on the second floor by windows. Furthermore, the building is illuminated by skylights. In the interior of the sales and administrative part, there is a dominant steel console staircase, connecting these two units. The building is designed to the principles of barrier-free use.
|
|
|
AUTOCENTRUM VW GROUP MIKULOV
Abikenova, Kamilya ; Hudeček, Vladimír (referee) ; Dýr, Petr (advisor) ; Kacálek, Petr (advisor)
BACHELOR THESIS DEALING WITH DOCUMENTATION FOR DSP AND DPS NEW BUILDINGS OF VOLKSWAGEN GROUP AUTOCENTRE. THE WORK IS BASED ON A PREVIOUSLY ESTABLISHED STUDY IN SUBJECT AG33. THE PROPOSED CONSTRUCTION IS LOCATED IN MIKULOV. THE LAND IS LOCATED ON A PREVIOUSLY FLAT LAND BETWEEN JIRASKOVÁ AND REPUBLICAN DEFENSE STREETS AND THE LAND ON THE WEST SIDE DEFINES THE WINE FIELDS. THE AUTOCENTER BUILDING CONSISTS OF FOUR OVERHEAD BUILDING OBJECTS, MULTI-DILATED, WHICH MEET THE REQUIREMENTS OF AUTOCENTRAL OPERATION. THESE ARE THE PRESENTATION, SALE AND SERVICE OF CARS, INCLUDING ACCESSORIES OF FOUR BRANDS ASSOCIATED IN THE VW GROUP. THE BUILDINGS ARE UNBORNEY, SINGLESTOREY-HALL TYPE. THE EXCEPTION IS ONLY THE SHOWROOM OFFICES LOCATED ON THE SECOND ABOVE FLOOR, WHICH SO DIVIDES THE ALREADY SPACE. THE CONSTRUCTION SYSTEM IS THE SAME FOR ALL OBJECTS. IT CONSISTS OF REINFORCEMENT OF A SKELETON STRUCTURE WITH STEEL TROLLEYS. THE OBJECTS ARE BASED ON REINFORCED CONCRETE FEET. VERTICAL STRUCTURES ARE MADE OF REINFORCED CONCRETE PILLARS, CLADDING OF KINGSPAN PANELS AND SCHÜCO GLASS FACADE SYSTEM. HORIZONTAL STRUCTURES CREATE STEEL COMPARTMENT TROLLEYS SPIROLL PANEL. THE ROOFING OF OBJECTS IS CREATED BY SINGLE-COATED SLOPE ROOFS DRAINED BY INTERNAL LEADS. IN SHOWROOM, THE LEADS ARE HIDDEN INSIDE THE SDK. THE INTEGRITY OF THE FOUR OBJECTS IN ONE UNIT IS ACHIEVED BY THE REPEAT OF THE SAME VIEWING ELEMENTS AND, ON THE SAME, THE LEGIBILITY OF THE INDIVIDUAL STRUCTURES IS OBJECTED BY THE GRADUATION OF INDIVIDUAL MATERIALS AND THEIR CLEAR DIVISION OF OBJECTIVES.
|
|
|
Call Center Process Automation Plan in ISO 9001:2000 Certified Organization
Hovadík, Jiří ; Liška, Jiří (referee) ; Dydowicz, Petr (advisor)
This master’s thesis deals with system of evidence customer requests in service organization. The introduction describes services activities in domain are focused on payment terminals and contemporary situation in call center. The suitable selection implementation tools are done. The second part contains the design of system for requests evidence and design of imports for service information system. The evaluation of the master’s thesis and some future improvements are presented.
|
|
|
Favorit Brno / cycling stadium - bicross track / architectural study - design / stage 2021/22
Nováková, Lucie ; Žalmanová, Petra (referee) ; Šindlar, Jiljí (advisor)
The assignment of the diploma thesis is an architectural study of a cycling stadium - velodrome in the Pisárky district in Brno for TJ Favorit Brno. The existing velodrome is located southwest on the edge of the Brno Exhibition Center on Křížovského Street. The Velodrome no longer meets the current requirements of track cycling, but it is historically valuable and has its genius loci. The new 250 m long wooden bike track (together with other parameters of the International Cycling Union) and its associated sports grounds are "inserted" into the existing velodrome, which is modified and reconstructed according to requirements. The grandstands have been preserved. The built-in building with a new track is then completely roofed, creating an enclosed space. As part of the stadium reconstruction, a new facility was also created for TJ Favorit Brno from a modular container system; These are changing rooms for athletes, administrative areas, and facilities for visiting clubs and athletes and IP areas. The container construction system for sports facilities is very practical, economical, fast, environmentally friendly, variable, and flexible to the current requirements of a constantly evolving sport. The Anteroom and ground floor in the southern part of the existing velodrome is equipped with services for the public: a cafe, souvenir shop, cash register, information center, service, and a bicycle and sports equipment store. The new track with grandstands is covered with ETFE foil anchored to new lattice trusses, which are connected to the existing roof.
|
|
|
Car Center VW Group
Velfl, Martin ; Štikar, Jaroslav (referee) ; Nový, Alois (advisor) ; Matějka, Libor (advisor)
The bachelor thesis deals with the new building of Car centre VW group. Earlier study in the subject AG33 gave form to the following bachelor´s thesis which further develops the study into level of Building permission design and Documentation for execution of the project. The designed building is situated in district Brno-Zábrdovice. The plot is situated on mostly flat land between the streets Cejl, Jana Svobody, Husovická and on the eastern side plot defines the river Svitava. The object of car centre consists of four buildings volumes which are mutually dilatated and meet the requirements of the operations of car centre. It includes presentation, sales, servicing cars Škoda, Volkswagen, Seat, Audi. The buildings are designed as a single storey steel assembled hall. An exception is only the offices of administration in the showroom located on the second floor, which divides the space. The construction system is the same for all objects. It consist of a prefabricated steel frame structure with longitudinal trusses. The bracing is achieved by a rigid ceiling slab in conjunction with steel rods and reinforced concrete shear walls. The structures is based on simple foundation pads combined with drilling piles and interconnection with strips all from reinforced concrete. Vertical structures consist of steel columns, shear concrete walls, Kingspan panelings and the Schüco glass facade system. Horizontal structures consist of steel straight trusses, bearing trapezoidal sheets coupled with a concrete layer and rolled IPE beams. The roofing of the buildings are designed as warm, non-walkable flat roofs, drained by internal rainwater drainages. In the showroom pipes are hidden inside steel colums that are covered with stainless steel sheets with polished surfaces. The integrity of four objects in one unit is achieved by repeating the same visual elements and on the contrary the readability of individual buildings is evident by gradation of individual volumes and their clear
|
|
|
Database Design for Efficient Operation of the Service Motorcycles and ATVs
Rozehnalová, Jana ; Tichý, Luděk (referee) ; Kříž, Jiří (advisor)
The principle of this thesis is to design an efficient database services for the motorcycleand ATV service, which is part of a small company MTT Ltd. business in the motorcycleindustry. It would simplify and streamline the receipt and registration of machines serviced.The first part is written theoretical background,basic issues. In the next picture is given of the current situation and analysis of the issues associated with it. Design solutions anddatabase design is given at the end of this thesis.
|
|
|
Marketing strategy in ICT company
Heža, Stanislav ; Zavadil, Zbyněk (referee) ; Šimberová, Iveta (advisor)
The thesis deals with the analysis of the company marketing strategy. In order to meet its objectives, it is necessary to evaluate all information on general conditions, the market and competition. Based on prerequisites of the further grow of professional environment, it proposes possible modes of use of different marketing strategies and their means of communication. The economic impact presumption of a proposal with respect to past experience is also calculated in this work.
|
|
|
Auto center VW Mikulov
Kováčik, Branislav ; Bílek, Zdeněk (referee) ; Dýr, Petr (advisor)
The aim of this bachelor's thesis was to create documentation for a building permit and documentation for the construction of a building, the basic compositional and architectural design of which is based on a previously processed architectural study within the subject AG033 - Atelier of production buildings. This is a design project of the Volkswagen Group Autocentre in Mikulov. The specified land intended for development is located in the westernmost part of the town of Mikulov in the cadastral territory of the town of Mikulov, it is an industrial zone of the town. The surrounding buildings are largely made up of low-rise large-scale buildings, production halls, storage facilities or agricultural buildings and their accessories. Within the zoning plan, the area adjacent from the south side to Jiráskova Street is listed as a brownfield. The shape of the land predetermines the proposed construction of the longitudinal shape of a deep character, as the land is stretched in the north - south direction and has the shape of a gradually narrowing trapezoid. The terrain is slightly sloping and descends to the south. From the south side, a wastewater treatment plant is adjacent to the solved area. The bachelor's thesis also deals with the solution of the external modifications of the area, including transport infrastructure, stratification and the number of parking spaces. An essential part is also the distribution and character of the upper and lower greenery, the location and shape of the areas intended for demonstration vehicles. Last but not least, the work deals with the solution of engineering networks within the technical equipment of buildings and technical infrastructure, management of waste, etc. The proposed building respects the floor plan delimitation of the land, primarily by maintaining the parallelism of the perimeter walls with these boundaries. The central element of the mass composition is an extravagantly designed ellipse used as the main exhibition space, opened by a large-area rounded glazing into the entrance area of the exterior. The remaining masses of the building are formed by blocks of different height levels, which achieves the compositional principle of gradation. The completely monotonous mass of the production hall is broken in each field by a massive skylight encircling the building along the entire perimeter of its section. The building has premises for warehousing, administrative activities, exhibition premises, technical facilities and premises belonging to professional workplaces of car mechanics. All material segments of the building are interconnected by internal passages. The whole building has a purely industrial character, which is based on the character and purpose of use of the building and has a connection with the automotive industry. The main materials used in the construction of this building are structural steel, concrete and thermal insulation perimeter panels. The façade emphasizes the essence of the ellipse, which is largely-glazed, while the storage and production areas are hidden in the rear and their visual layer is formed by sheet metal in gray, respectively. white color.
|
|
|
Equipment for installation and service of Spider ILD02
Frühbauer, Jiří ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
This Bachelor’s thesis deals with constructional solution and design of handling equipment for assembly and service of Spider ILD02 lawnmower. This thesis presents a discretion and evaluation of several alternatives for given problem, which are followed up by establishment of selected technical parameters. This thesis also consists of selected solution of construction, which is followed up by calculation of handling forces. Conclusion describes calculation of structural load and strength inspection of important construction units. This thesis consists of technical report and drawing documentation. Drawing documentation is supported by model processing in 3D CAD system and also contains assembly drawing of the whole device, turntable shaft, lever shaft, large sprocket hub and housing of the stand.
|
guest ::
