|
|
Návrh autonomního plavidla
KOTOUČEK, Petr
This thesis describes the development and emergence of an autonomous vessel. It mainly focuses on the construction side of the project KOLDRO "Univerzální systém kolaborativních dronů" co-financed from EU funds. The work is divided into theoretical (chapters~1-5) and practical (chapter~6) parts and supplemented by an attachment with technical drawings.
|
|
|
Difuzní vlastnosti OSB desek v důsledku zasažení nadměrnou vlhkostí.
Žižková, Lucie ; Vertal', Marián (referee) ; Chybík, Josef (referee) ; Bečkovský, David (advisor)
The presented dissertation focuses on the change of diffusion properties in oriented strand board (OSB) panels after exposure to excessive moisture. OSB panels undergo a change in their diffusion properties after being affected by excessive moisture and subsequently dried, causing them to deviate from the original design of the wooden wall structure. The aim of this study is to describe the experimentally measured change in diffusion properties and incorporate it into the composition of a real wooden wall structure, evaluating its performance through computer simulation. The introduction of the dissertation provides the theoretical basis for the experimental section, which includes measurements of water absorption, diffusion properties, and the risk of mold growth. The experimental section describes the approaches and methods used to achieve the objectives of the dissertation. The measurements were conducted on test samples of OSB panels in the laboratories of the Institute of Civil Engineering. After being exposed to excessive moisture, the test samples were dried using two drying methods. The dried test samples were placed in testing assemblies, where diffusion was measured using the dry cup method. The measurements were carried out in two stages, with more than 80 samples measured in each research stage. In the final part, the measurements are evaluated through graphs. The change in diffusion properties was then incorporated into the composition of a real wooden wall structure and assessed using computer simulation, which is more commonly used in practice according to ČSN 73 0540 (Czech Technical Standard).
|
|
|
Methods of Building Wear and Their Applicability in Practice
Peřina, Josef ; Bejšovec, Jaroslav (referee) ; Staněk, Roman (advisor)
This diploma thesis is a survey describing the relationship that different methods of determination of wear of properties have to valuation of the market price and to the price obtained according to the valid assessment act no. 151/1997 Sb. As a basis for this survey, three family houses of different age were chosen to show the relationships of different methods to prices in various stages of life span of the buildings. All the partial results of the analysis of the different methods of determination of wear of particular buildings were compared with the market and obtained prices. The family houses were assessed according to the assessment act and its relevant implementing decree no. 3/2008 Sb. The valuation of the market prices was made according to the current situation at the real property market in respective locations of the assessed properties.
|
|
|
Vehicle Hydropneumatic Unit
Koudelka, Roman ; Hejtmánek, Petr (referee) ; Blaťák, Ondřej (advisor)
This diploma thesis, following the bachelor's thesis, is devoted to the gas-liquid unit of a vehicle, as the central element of hydropneumatic suspension. The aim is to dimension and construct this component and integrate it together with other elements into a complex suspension system. Based on possible forms listed in the research section, regarding to current development trends, the form of the unit is chosen. The practical part begins with simulations comparing a hydropneumatic with a conventional suspension system. After solving this issue, it is possible to proceed to the dimensioning of the basic parameters of the unit and then to its construction, respecting the relevant strength calculations. The last step is to build a conceptual design of the whole hydropneumatic suspension system.
|
|
| |
|
|
Manufacturing of ready-to-wear clothes
Antonova, Alina ; Suchánek,, Petr (referee) ; Nový, Alois (advisor) ; Bečkovská, Tereza (advisor)
The bachelor thesis deals with design of an industrial building – production of branded clothing in Brno. Production of branded clothing is focused on the production of branded women's clothing. The area is located in Brno-Bohunice at Vinohrady Street. The work follows the architectural study AG034. The land is sloping, rising to the northeast. The slope is used for an auxiliary building, there is also a parking lot. The land is bordered on two sides by roads. In the northern part it is the existing road, in the southern part the road is designed according to the zoning plan. The main entrance for employees is located in the northeastern part. Arrival for supply is solved by a new road within the solved plot. It is a newly built 4-storey production hall and two auxiliary buildings with flat roofs. The operation will be technologically and organizationally connected to the parent plant abroad. The building will have warehouses for finished products, blanks, materials and plant management. Catering will be solved in the form of import and heating of food. The concept of the whole building is based on the shape of the land, the shape of the main building is based on simple geometry. The main building consists of four blocks, which form the production, a separate administrative part and a part intended for warehouses. The building has four floors. The building near the road is designed with a green roof, as well as a building for auxiliary operation next to the parking lot. The green roof will look natural and connect the proposed building with the character of the site. The production hall is mostly glazed, which allows for all-day natural lighting. The entrance part of the building is also glazed, the structure is visible and gives the building the expression of an industrial building. The sanitary facilities are glazed with sash windows, which provide natural lighting and also ventilation necessary in case of technical problems with recuperation.
|
|
|
Static analysis of moving skyscraper
Jedlička, Michal ; Martinásek, Josef (referee) ; Vlk, Zbyněk (advisor)
The thesis is about static analysis of moving skyscraper (inspired by The Dynamic Tower). There is a rotation of each particular floor around its axis independently on each other. In this thesis, moving skyscraper is solved as a whole piece with specialization in the moving floors and their mounting on the core of the building.
|
|
|
Family house
Zachovalová, Jana ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
This bachelor thesis discusses a project of a detached house with comercial space, which is located in Chrudichromy district. The house has two floors and basement. In the basement there are two deep-level garages. The comercial space will be engaged as a hairdresser's. This is situated on the first floor. The house is projected for five-member family. The enclosure wals are made of Porotherm 30 AKU Z PROFI bricks and are insulated by the Etics systhem. The pack frame is made of POT beams and ceeling beams MIAKO. The house has a double-surface ventilated collar roof. The Bachelor Thesis serves as a contract document for execution of the project.
|
|
|
Design of Car Initiator
Suchý, Jan ; Píštěk, Václav (referee) ; Novotný, Pavel (advisor)
The bachelor thesis is focused on proposal solution of automotive initiator construction and design. The proposal is being carried out with regard to the need to ensure the maximum functionality of the whole element. As for the choice of materials and used technology the costs and procedures commonly used today are not being taken into account. The main objective is to eliminate the shortcomings of current automotive initiators and the proposal of technological procedures in the production of a new component.
|
|
|
Small apartment house
Doseděl, Adam ; Šoulová, Eva (referee) ; Utíkalová, Ivana (advisor)
This thesis describes the design of small apartment building in Prostějov. It is a detached building with basement. The apartment building has one basement and four above. Consists of a total of 15 residential units. On first floor are situated three flats and on second, third and fourth floor are four residential units. The building is designed of structural systém of ceramic blocks. The ceilings are from monolithic and the roof is designed as a pitched roof. The work includes project documentation for the construction.
|
guest ::
