|
|
The use of solar collectors in the Czech Republic
Kočka, Jan ; Kic, Pavel (advisor) ; Vaculík, Petr (referee)
The aim of this thesis was to approach the market of solar systems in the Czech Republic and the subsequent design of the solar system in the selected object, in this case RD Divišov. In the chapter Overview of the findings from the literature there are outlined the general knowledge about the Sun and the use of solar radiation. In addition, this chapter provides a general overview of solar collectors followed by the approach of the necessary elements for the functioning of the solar systems. In the chapter Default conditions of the solved object there is characterized the selected one, and there is described the current system in this object. Chapter The design of the solar system in a given object includes the proposal of individual elements of the solar set for water heating. There are compared variants with different demands, different input parameters on the basis of values and graphs chosen the most efficient option for this project. At the end, the economic evaluation of the proposed system with the subsequent comparison with the current system and possible return. The work is ended by summarizing of the whole issue.
|
|
|
Production of connector
Kočka, Jiří ; Rumíšek, Pavel (referee) ; Žák, Ladislav (advisor)
The diploma thesis deal with the proposal of connector manufacturing from bronze sheet CuSn6, thickness 1.5mm in production volume of 1.600.000 parts per year. From considered manufacturing variants there was chosen shearing and forming technology of thread in the progressive stamping die. For part production was selected pressing machine Bruderer 1250 with nominal pressing force 1250 kN from company E. Bruderer Maschinenfabrik AG. In the economical evaluation there were determined expenses 21.6 Kč per one piece including demanded profit. The turning point was calculated at production of 165.522 parts.
|
|
|
Manufacturing of connector
Kočka, Jiří ; Žák, Ladislav (referee) ; Podaný, Kamil (advisor)
The bachelor thesis deals with a concept of the production technology of the connector. It is made of CuSn6 bronze plate of width 0,25 mm, production batch of 1 200 000 pieces per year.There was performed a recherche based on the topic. Out of available technologies for the production were chosen cutting and forming in follow die. For the cutting of the bronze plate was chosen high-speed press machine Bruderer 18 with nominal pressing force of 180 kN made by E. BRUDERER Maschinenfabrik AG. The production costs per one piece were evaluated in the economic analysis including manufacturer profit and there was defined break-even point which occurs after production of 876 282 pieces.
|
|
|
Nanopositioning with detection of a standing wave
Holá, M. ; Hrabina, J. ; Číp, O. ; Fejfar, Antonín ; Stuchlík, Jiří ; Kočka, Jan ; Oulehla, J. ; Lazar, J.
A measuring technique is intended for displacement and position sensing over a limited range with detection of standing-wave pattern inside of a passive Fabry-Perot cavity. In this concept we consider locking of the laser optical frequency and the length of the Fabry-Perot cavity in resonance. Fixing the length of the cavity to e.g. a highly stable mechanical reference allows stabilizing wavelength of the laser in air and thus to eliminate especially the faster fluctuations of refractive index of air due to air flow and inhomogeneity. Detection of the interference maxima and minima within the Fabry-Perot cavity along the beam axis has been tested and proven with a low loss transparent photodetector with very low reflectivity. The transparent photodetector is based on a thin polycrystalline silicon layer. Reduction of losses was achieved thanks to a design as an optimized set of interference layers acting as an antireflection coating. The principle is demonstrated on an experimental setup.
|
|
|
Nanopositioning with detection of a standing wave
Holá, Miroslava ; Hrabina, Jan ; Číp, Ondřej ; Fejfar, A. ; Stuchlík, J. ; Kočka, J. ; Oulehla, Jindřich ; Lazar, Josef
A measuring technique is intended for displacement and position sensing over a limited range with detection of standing-wave pattern inside of a passive Fabry-Perot cavity. In this concept we consider locking of the laser optical frequency and the length of the Fabry-Perot cavity in resonance. Fixing the length of the cavity to e.g. a highly stable mechanical reference allows stabilizing wavelength of the laser in air and thus to eliminate especially the faster fluctuations of refractive index of air due to air flow and inhomogeneity. Detection of the interference maxima and minima within the Fabry-Perot cavity along the beam axis has been tested and proven with a low loss transparent photodetector with very low reflectivity. The transparent photodetector is based on a thin polycrystalline silicon layer. Reduction of losses was achieved thanks to a design as an optimized set of interference layers acting as an antireflection coating. The principle is demonstrated on an experimental setup.
|
|
|
Synthesis, structure, and opto-electronic properties of organic dies on diamond
Rezek, Bohuslav ; Čermák, Jan ; Ukraintsev, Egor ; Hubík, Pavel ; Mareš, Jiří J. ; Ledinský, Martin ; Fejfar, Antonín ; Kočka, Jan ; Kromka, Alexander
We prepare a thin-film heterojunction of polypyrrole (Ppy) on hydrogen-terminated diamond by electro-polymerization from solution. We combine advanced scanning techniques (AFM, KFM, micro-Raman) to characterize microscopic structural, chemical, and opto-electronic properties of such system.
|
|
| |
|
| |
|
| |
guest ::
RSS feed.