|
|
Implementation of Communication Technology complying IEC 61850 as the Demonstrational DCS System
Kozák, Ondřej ; Arm, Jakub (referee) ; Fiedler, Petr (advisor)
This thesis deals with the issue of communication of protection by IEC 61850 standard and reading, control and visualization of protections by DCS systém 800xA and PLC AC500 from ABB and extended visualization by cloud service Grafana. The IEC 61850 standard, its protocols anad the topologies used have been descibed in this work. Furthermore, the basic functions of the instruments used were described. The main part describes the procedure of creating SCD file for communication configuration and subsequent uploading to individual systems, creating visualization in DCS 800xA system, setting up communication between protection devices and reading from them using AC 500 PLC. For the cloud service there is a description of the implementation of the MQTT broker for sending data between PLC and database Influxdb that stores the data and forwards it to Grafana visualization environment.
|
|
|
OPC UA Client for "Sorter of Boxes" Laboratory Model
Magáth, Marek ; Arm, Jakub (referee) ; Jirgl, Miroslav (advisor)
This bachelor’s thesis is about OPC comunication protocol, specifically the newest specification OPC UA (Unified Architecture). By creating OPC UA client application using the OPC UA .NET libraries offered by the OPC Foundation for free. Setting up the OPC server on the S7-1500 PLC using the TIA Portal V14. Part of the work is done by modifying model Třídička beden, specifically with the modification motor control and creating more complex control task for this model. Next, by creating a control program in the Ladder Diagram, where I specifically describe some solutions of problems. And also by creating visualization on the touch panel TP700 Comfort. The visualization is created in WinCC, which is part of the TIA Portal. Finally, I describe how to link the OPC UA client created together with the touch panel and the PLC that control this model. And how to collect or observe the process data.
|
|
|
OPC UA client for communication with PLC B&R Automation
Staněk, Lukáš ; Parák, Roman (referee) ; Lang, Stanislav (advisor)
This thesis is a research of the OPC UA communication protocol with a subsequent example of its implementation in the creating client. The research begins with historical development and then focuses on to the theoretical analysis of OPC UA, these outputs are implemented in the client application OPC UA. This client, which is output of this thessis, then demonstrates the practical use of OPC UA. In this thesis are shown suitable procedures for development of applications, which are generally valid.
|
|
|
Genealogic Semantic Wiki
Brychová, Jana ; Smrž, Pavel (referee) ; Schmidt, Marek (advisor)
This thesis project is about possibilities of storing genealogic data in different formats and based on the results it suggests data format which can be used consequently as a source for the vizualization by semantic web. In the scope of the project there is a genealogic application implemented for KiWi platform. This application enable visualization of designed format using prefuse technology. There are basic and aslo some other usefull information about the basic technologies of the semantic web like RDF, XM, ontology, OWL language stated in the document.
|
|
| |
|
|
Medium voltage substation automation using control system COM600 and standard IEC61850
Havelka, Tomáš ; Štaffa, Jan (referee) ; Háze, Jiří (advisor)
This work deals with problematic of standard IEC61850, mainly with chapter IEC 61850-9-2 LE which is commonly known as Process bus communication. There are described advanced tools of the control system COM600 with detail description of their configuration in this work. It also deals with configuration of IEC 61850-9-2 LE with Relion family protection relays and its implementation to the control system COM600. The main aim of this work is focused on configuration of IEC 61850-9-2 standard with protection relays, configuration and detail description of COM600 advanced tools, description of Logic processor, further custom design and appliaction configuration global reset of Logic procesor in control system COM600.
|
|
| |
|
|
Web control system for textile machine
Balázsy, František ; Jirgl, Miroslav (referee) ; Arm, Jakub (advisor)
This thesis deals with the design and implementation of web control application for textile machine. It consists of an HMI application based on the VueJS and Electron frameworks which communicates with the B&R PLC using the OPC UA protocol. For programming and production management uses MES microservice based on web realtime API. After it deals with deploying the application to a Linux station with kiosk configuration. The whole stack is implemented using JavaScript programming language and open-source software resources exclusively.
|
|
|
Mobile Accessing of Automation Data (Front-End Development)
Kubiš, Jan ; Kolář, Dušan (referee) ; Květoňová, Šárka (advisor)
Content of this report describes design, implementation and functionality of a web application, which was developed within bachelor thesis and which purpose is to collect, transfer and present data from devices that are able to provide the data according to OPC standard specification (OLE for Process Control - Object Linking and Embedding for Process Control). The application makes use of client-server architecture. Application back-end is implemented in C# and front-end, which is the subject of this report, uses combination of programming, scripting and markup languages C#, JavaScript, HTML and SVG. Application is being developed for ABB company (who is owner of all source codes) and it is expected to be put into operation in commercial sector. Supported platform is operating system Microsoft Windows 10.
|
|
|
PLC controlled system for manipulated arm
Slavík, Miroslav ; Zemánek, Pavel (referee) ; Pásek, Jan (advisor)
In this bachelor´s thesis is solved automatic task of PLC controled manipulated arm. For this controled is used Siemens Simatic 200 with programing enviroment MicroWin. The servos are moving with parts of arm. The servos are conected to the PLC trought PCB of electronics interface. PCB is created specially for this aim. Design of PCB is described. Details description is PLC´s program. Comunication between PLC and SCADA is trought a PPI cable. Vizualition of proces is runing on the ControlWeb by Moravians instrument, this is descripted also. To the Manipulated arm is instaled conveyor. Boxes are transporting by conveyor. Pyramid is build from boxes.
|
guest ::
